IBEK 3 Watt DC-DC-Converter Family IPS3 www.ibek.ch Single, double, dual & triple outputs Input to output isolated Dual & triple outputs: Output1 to output2(3) isolated * * * * * * * * * Ultra wide 1:4 input voltage ranges Shutdown input Very high efficiency up to 83% High reliability Continuous no-load and short-circuit proof Extended ambient temperature range -40...+85C No derating Made in Switzerland, accordingly ISO 9001:2000 2 years warranty Standard Types 2 Electromagnetic emission EN 55022 < B Conducted and radiated emissions (Triple outputs upon request) 5 IPS 24 IPS 48 IPS No load input current 25 5 3 mA typ. Input current in shutdown condition 1.3 mA typ. Switching frequency 130 kHz typ. Output voltage accuracy 2% max. Static line regulation 15 mV typ. Static load regulation FL to * L 0...2%; 5 VDC outputs 0...5% typ. Output voltage noise (20 MHz BW) 100 mVpp typ. Efficiency 79% to 83% typ. I/O Electric strength test voltage 1500 VDC O/O Electric strength test voltage 700 VDC Coupling capacitance 300 pF Shutdown input (SD) Apply -0.3...+1.35 VDC / 100...200 A 1 to shut down (switch off) the output voltage(s). Normal operation with open pin. Ambient temperature range -T: -25...+71C; -S: -40...+85C Case temperature range -T: -25...+95C; -S: -40...+105C Storage temperature range -T: -55...+105C; -S: -55...+105C Case material Non-conductive plastic, UL94 V-0 rated MTBF, GB @ 40C case 2.200.000 hours (MIL-HDBK-217F, Notice 2) 1 5 IPS3-types: -0.3...+0.6 VDC / 500...700 A Dimensions in mm (inches) Input voltage VDC Single output xx IPS3-05-T RoHS 4.75...16 xx IPS3-12-T RoHS (nominal 5) xx IPS3-15-T RoHS Double output 3 9...36 xx IPS3-0505-T RoHS (nominal 24) xx IPS3-1212-T RoHS 45 V for 10 ms xx IPS3-1515-T RoHS repetition rate 10 s Dual output xx IPS3-05-05-T RoHS 18...75 xx IPS3-05-12-T RoHS (nominal 48) xx IPS3-05-15-T RoHS xx IPS3-12-12-T RoHS xx IPS3-15-15-T RoHS Triple output 4 xx IPS3-05-1212-T RoHS xx IPS3-05-1515-T RoHS Output 1 VDC mA Output 2 VDC mA 5 12 15 500 250 200 - - 5 12 15 250 125 100 - - 5 5 5 12 15 250 250 250 125 100 5 12 15 12 15 250 125 100 125 100 5 5 300 300 12 62 15 50 2 To complete type number replace "xx" by the required nominal input voltage, e.g. 5 IPS3-05-12-T RoHS. 3 Double outputs should have symmetrical load conditions to comply with the specifications listed on the left side. 4 Not available with input voltage range 4.75...16 VDC. Extended temperature range -S is available for all types. Replace -T by -S on type number, e.g. 24 IPS3-05-1515-S RoHS. Modifications and customs are available upon request. Pin 1 2 9 10 11 12 13 15 16 17 20 23 24 Single output +Vi +Vi No Pin No Pin No Pin -Go +Vo No Pin No Pin No Pin SD -Gi -Gi Pin Configuration Double Dual output output +Vi +Vi +Vi +Vi No Pin -Go1 Go No Pin Go No Pin No Pin +Vo1 -Vo +Vo2 +Vo No Pin No Pin -Go2 No Pin No Pin SD SD -Gi -Gi -Gi -Gi Triple output +Vi +Vi No Pin Go1 No Pin Vo1 +Vo2 Go2 No Pin -Vo2 SD -Gi -Gi Specifications subject to change without notice 15.12.2008 More power with IBEK ! Page 6