120 DATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R) 5%, 1% sizes 4 x 0603 Product specification - Oct 27, 2008 V.3ate of Mar. 06, 2003 RoHS compliant Product specification Chip Resistor Surface Mount YC/TC SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. APPLICATIONS Terminal for SDRAM and DDRAM Computer applications: laptop computer, desktop computer Consume electronic equipment: PDAs, PNDs Mobile phone, telecom... 2 8 164 (RoHS Compliant) SERIES YAGEO BRAND ordering code GLOBAL PART NUMBER ( PREFERRED ) YC 164 - X X X XX XXXX L TC (1) (2) (3) (4) (5) (6) (1) TOLERANCE F = 1% J = 5% (for Jumper ordering, use code of J) (2) PACKAGING TYPE R = Paper taping reel (3) TEMPERATURE COEFFICIENT OF RESISTANCE - = Base on spec FEATURES RoHS compliant - Products with lead free terminations meet RoHS requirements - Pb-glass contained in electrodes - Resistor element and glass are exempted by RoHS Reducing environmentally hazardous wastes (4) TAPING REEL 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel (5) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of "Resistance rule of global part number". (6) OPTIONAL CODE High component and equipment reliability Saving of PCB space L = optional symbol (Note) None forbidden-materials used in products/production Resistance rule of global part number Resistance code rule Example Halogen Free Epoxy 0R 0R = Jumper XRXX (1 to 9.76 ) 1R = 1 1R5 = 1.5 9R76 = 9.76 XXRX (10 to 97.6 ) 10R = 10 97R6 = 97.6 XXXR (100 to 976 ) 100R = 100 XKXX (1 to 9.76 K) 1K = 1,000 9K76 = 9760 XMXX (1 to 9.76 M) 1M = 1,000,000 9M76= 9,760,000 ORDERING EXAMPLE The ordering code of a YC164 convex chip resistor array, value 1,000 X with 5% tolerance, supplied in 7-inch tape reel is: YC164-JR-071K(L). NOTE 1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) www.yageo.com Oct 27, 2008 V.3 Product specification Chip Resistor Surface Mount YC/TC SERIES 3 8 164 (RoHS Compliant) PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER ( PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2350 XXX XXXXX L (1) (2) (3) Last digit of 12NC Resistance decade (3) (4) TYPE/ START TOL. RESISTANCE 4x0603 IN (1) RANGE (%) PAPER / PE TAPE ON REEL (units) 5,000 (2) 20,000 Last digit 0.01 to 0.0976 X 0.1 to 0.976 X 0 8 7 ARV241 2350 5% 1 to 1 M 035 10xxx 035 12xxx 1 to 9.76 X ARV242 2350 1% 1 to 1 M 025 1xxxx 025 3xxxx 10 to 97.6 X 9 ARC241 2350 5% 10 to 1 M 034 10xxx 013 3xxxx 100 to 976 X 1 ARC242 2350 1% 10 to 1 M 024 1xxxx 013 3xxxx 1 to 9.76 KX 2 Jumper - 0 ARV241/YC164 035 91001 - 10 to 97.6 KX 3 ARC241/TC164 034 91001 - 100 to 976 KX 4 (1) The resistors have a 12-digit ordering code starting with 2350. 1 to 9.76 MX 5 (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. 10 to 97.6 MX 6 2350 (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of "Last digit of 12NC". (4) "L" is optional symbol (Note) . Example: 0.02 X = 0200 or 200 0.3 X = 3007 or 307 1X = 1008 or 108 33 KX = 3303 or 333 10 MX = 1006 or 106 ORDERING EXAMPLE The ordering code of a ARV241 resistor, value 1,000 X with 5% tolerance, supplied in tape of 10,000 units per reel is: 235003510102(L) or YC164-JR-071K(L). NOTE 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) www.yageo.com Oct 27, 2008 V.3 Product specification Chip Resistor Surface Mount YC/TC 4 8 164 (RoHS Compliant) SERIES MARKING YC164 TC164 0 0 1-Digit marking YNSC032 YNSC010 Fig. 1 Jumper=0 Fig. 2 Jumper=0 2 E-24 series: 3 digits 2 YNSC029 First two digits for significant figure and 3rd digit for number of zeros YNSC036 Fig. 3 Value = 240 K Fig. 4 Value = 240 K For further marking information, please see special data sheet "Chip resistors marking" CONSTRUCTION OUTLINES The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Nibarrier) are added. See fig.5 overcoat resistive layer inner electrode termination ceramic substrate YNSC069 Fig. 5 Chip resistor outlines DIMENSIONS Table 1 TYPE YC164 TC164 B (mm) 0.30 0.15 0.30 0.15 H (mm) 0.65 0.05 --- H1 (mm) 0.50 0.15 --- P (mm) 0.80 0.05 0.80 0.05 L (mm) 3.20 0.15 3.20 0.15 T (mm) 0.60 0.10 0.60 0.10 W1 (mm) 0.30 0.15 0.30 0.15 W2 (mm) 1.60 0.15 1.60 0.15 H H1 H a B T a W1 B W2 a L YC164 P L TC164 a YNSC054-1 Fig. 6 YC/TC164 series chip resistors dimension SCHEMATIC For dimension see Fig. 6 and Table 1 8 7 6 8 5 YC164 7 6 5 TC164 R1 R2 R3 R1 R4 R2 R3 R4 YNSC055 1 Fig. 7 Equivalent circuit diagram 2 R1 = R2 = R3 = R4 3 4 1 2 3 4 R1 = R2 = R3 = R4 www.yageo.com Oct 27, 2008 V.3 Product specification Chip Resistor Surface Mount YC/TC SERIES ELECTRICAL CHARACTERISTICS FOOTPRINT AND SOLDERING PROFILES Table 2 YC/TC164 1/16 W CHARACTERISTICS Operating Temperature Range -55 C to +155 C Maximum Working Voltage 50 V Maximum Overload Voltage 100 V Dielectric Withstanding Voltage 100 V Resistance Range 5% (E24), 1% (E24/E96) 5 8 164 (RoHS Compliant) YC164 1 to 1 M TC164 10 to 1 M For recommended footprint and soldering profiles, please see the special data sheet "Chip resistors mounting". Zero Ohm Jumper < 0.05 Temperature Coefficient 200 ppm/C Jumper Criteria Rated Current 1.0 A Maximum Current 2.0 A PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PRODUCT TYPE PACKING STYLE REEL DIMENSION QUANTITY PER REEL YC/TC164 Paper Taping Reel (R) 7" (178 mm) 5,000 units 10" (254 mm) 10,000 units 13" (330 mm) 20,000 units NOTE 1. For paper tape and reel specification/dimensions, please see the special data sheet "Chip resistors packing". FUNCTIONAL DESCRIPTION POWER RATING YC/TC 164 rated power at 70 C is 1/16 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=(P X R) or max. working voltage whichever is less handbook, halfpage P (%Prated ) MLB206_2 100 50 0 55 0 50 70 100 155 o Tamb ( C) Where V=Continuous rated DC or AC (rms) working voltage (V) Fig. 8 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (Tamb) P=Rated power (W) R=Resistance value (X) www.yageo.com Oct 27, 2008 V.3 Product specification Chip Resistor Surface Mount YC/TC SERIES 6 8 164 (RoHS Compliant) TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Operational Life/ Endurance MIL-STD-202G-method 108A 1,000 hours at 705 C applied RCWV 1.5 hours on, 0.5 hour off, still air required (2%+0.05 ) <100 m for Jumper High Temperature Exposure/ Endurance at upper category temperature MIL-STD-202G-method 108A IEC 60115-1 4.25.3 1,000 hours at maximum operating temperature depending on specification, unpowered (1%+0.05 ) <50 m for Jumper JIS C 5202-7.11 No direct impingement of forced air to the parts Moisture Resistance MIL-STD-202G-method 106F IEC 60115-1 4.24.2 IEC 60115-1 4.25.1 JIS C 5202-7.10 Tolerances: 1553 C Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 C / 65 C 95% R.H, without steps 7a & 7b, unpowered (2%+0.05 ) <100 m for Jumper Parts mounted on test-boards, without condensation on parts Measurement at 242 hours after test conclusion Thermal Shock MIL-STD-202G-method 107G -55/+155 C Note: Number of cycles required is 300. Devices unmounted Short time overload MIL-R-55342D-para 4.7.5 IEC60115-1 4.13 (0.5%+0.05 ) for 10 K to 10 M (1%+0.05 ) for others Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air - Air <50 m for Jumper 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature (2%+0.05 ) <50 m for Jumper No visible damage Board Flex/ Bending IEC60115-1 4.33 (1%+0.05 ) Device mounted on PCB test board as described, only 1 board bending required <50 m for Jumper 3 mm bending No visible damage Bending time: 605 seconds Ohmic value checked during bending www.yageo.com Oct 27, 2008 V.3 Product specification Chip Resistor Surface Mount YC/TC SERIES 7 8 164 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDECJ-STD-002B test B Electrical Test not required IEC 60068-2-58 Magnification 50X Well tinned (95% covered) No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 C dry heat 2nd step: leadfree solder bath at 2453 C Dipping time: 30.5 seconds - Leaching - Resistance to Soldering Heat IPC/JEDECJ-STD-002B test D No visible damage IEC 60068-2-58 Leadfree solder, 260 C, 30 seconds immersion time MIL-STD-202G-method 210F Condition B, no pre-heat of samples (1%+0.05 ) IEC 60068-2-58 Leadfree solder, 270 C, 10 seconds immersion time <50 m for Jumper No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Oct 27, 2008 V.3 Product specification Chip Resistor Surface Mount YC/TC SERIES 8 8 164 (RoHS Compliant) REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 3 Oct 27, 2008 - - Change to dual brand datasheet that describes YC/TC164 with RoHS compliant - Description of "Halogen Free Epoxy" added - Define global part number Version 2 Mar 01, 2005 - - Test method and procedure updated - TC164, the concave chip resistor arrays combined Version 1 Apr. 22, 2004 - - 13'' taping and Jumper added, delete G in ordering code, and test & requirement (Pb free) updated Version 0 Nov. 10, 2003 - - First issue of this specification " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com Oct 27, 2008 V.3