D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Mounting height Sta nda rd V ers 9--37 50 ion Stamped solder pins, angled without grounding board locks No. of contacts Identification Performance levels Explanations see page 05.04 Other performance levels on request Part No. Performance level Performance level 3 2 Male connector D-Sub metal shell with dimples 2.84 mm pitch 9 15 25 37 09 65 123 780 09 65 223 780 09 65 323 780 09 65 423 780 2.84 mm pitch . . . . 09 65 123 680 09 65 223 680 09 65 323 680 09 65 423 680 2.54 mm pitch 9 15 25 37 09 65 122 780 09 65 222 780 09 65 322 780 09 65 422 780 . . . . 2.54 mm pitch . . . . 09 65 122 680 09 65 222 680 09 65 322 680 09 65 422 680 . . . . Female connector metal shell 2.84 mm pitch 9 15 25 37 50 09 66 113 760 09 66 213 760 09 66 313 760 09 66 413 760 09 66 513 760 2.84 mm pitch . . . . . 1) 1) 1) 1) 1) 2.54 mm pitch 9 15 25 37 50 Please insert digit for flange thread or fitted female screw locks O 3.1 mm hole 1)01) M3 1 4-40 UNC 2 fitted screw locks 4-40 UNC 3 05 16 1) Not normally kept in stock 09 66 112 760 09 66 212 760 09 66 312 760 09 66 412 760 09 66 512 760 09 66 113 660 09 66 213 660 09 66 313 660 09 66 413 660 09 66 513 660 . . . . . 1) 1) 1) 1) 1) 2.54 mm pitch . . . . . 1) 09 66 112 660 09 66 212 660 09 66 312 660 09 66 412 660 09 66 512 660 . . . . . 1) s D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Mounting height Sta nda rd V ers 9--37 50 ion s Stamped solder pins, angled without grounding board locks Identification Drawing Dimensions in mm Male connector Mating face acc. to: DIN 41 652 * CECC 75 301-802 * IEC 60 807 fitted screw locks 4 - 40 UNC Nut thread D-Sub No. 1 contact M3 or 4 - 40 UNC Dimples 9-37 Female connector X 50 Mating face acc. to: DIN 41 652 * CECC 75 301-802 * IEC 60 807 No. 1 contact 9-37 Board drillings a 50 b0.1 c f 9 30.90 25.00 12.50 2.74 15 39.20 33.30 12.50 2.74 25 53.10 47.00 12.50 2.76 37 69.40 63.50 12.50 2.76 50 67.00 61.10 15.40 2.76 05 17 Mating conditions see page 05.04 Mounting details see page 05.24