SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
NPN Triple Diffused Planar Silicon Transistor
Color TV Horizontal Deflection
Output Applications
Ordering number:EN2430
2SD1883
31099TH (KT)/2207TA, TS No.2430–1/3
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Package Dimensions
unit:mm
2039D
[2SD1883]
Applications
· Color TV horizontal diflection output.
· Color display horizontal deflection output.
Features
· High speed (tf=100ns).
· High breakdown voltage (VCBO=1500V).
· High reliability (adoption of HVP process).
˚C
˚C
Electrical Characteristics at Ta = 25˚C
1 : Base
2 : Collector
3 : Emitter
SANYO : TO-3PML
16.0
2.0
2.8
1.0
4.0
21.0
5.0
8.0
22.0
20.4
5.6 3.1
2.0
2.0
0.6
5.45
5.45
123
3.5
3.4
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVesaB-ot-rotcelloCV
OBC 0051V
egatloVrettimE-ot-rotcelloCV
OEC 008V
egatloVesaB-ot-rettimEV
OBE 6V
tnerruCrotcelloCI
C4A
)esluP(tnerruCrotcelloCI
PC 21A
noitapissiDrotcelloCP
C05W
erutarepmeTnoitcnuJjT 051
erutarepmeTegarotSgtsT 051+ot55–
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
tnerruCffotuCrotcelloC ISEC VEC V0051= 0.1Am
IOBC VBC V008= 01Aµ
egatloVniatsuSrettimE-ot-rotcelloCV
)sus(OEC ICI,Am001= B0=008V
tnerruCffotuCrettimEI
OBE VBE V4= 0.1Am
egatloVnoitarutaSrettimE-ot-rotcelloCV
)tas(EC ICI,A5.2= BA8.0= 5V
egatloVnoitarutaSrettimE-ot-esaBV
)tas(EB ICI,A5.2= BA8.0=5.1V
niaGtnerruCCD hEF 1V
EC I,V5= CA5.0= 8
hEF 2V
EC I,V5= CA5.2= 5.37
emiTllaFt
fICI,A3= 1B I,A8.0= 2B A6.1–= 1.03.0sµ
2SD1883
No.2430–2/3
Switching Time Test Circuit
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of March, 1999. Specifications and information herein are subject to
change without notice.
2SD1883
PS No.2430–3/3
