Factory Installed Panel Mount TRIMPOT(R) POTENTIOMETER PANEL MOUNTING OPTIONS AND HARDWARE Many Trimpot Potentiometers are available for panel mount application. Models RT12/RJ12, 3057/3059 Models 3005/3006/3009 HEX NUT AND LOCKWASHER (R) 20.32 (.80) 10.31 (.406) MAX. 6.35 (.25) #10-32 UNF-2A THD. This product option provides for maximum design flexibility. To order Trimpot(R) Potentiometers with panel mount hardware attached by the factory, simply add an "M" or "Z" suffix to the Bourns part number per Table I. 2.54 (.100) 7.95 (.313) 33.35 (1.31) 6.35 (.25) ADJ. SLOT 2.54 LONG (.100 ) .508 (.020) WIDE .762 (.030) DEEP Example: 3006P-1-100Z BUSHING 10-32 NF-2 THD To order military Trimpot(R) Potentiometers with panel mount hardware attached by the factory, order the military part number and add "with panel mount attached." Example: RT12C2PRC, with panel mount attached. 6.76 .38 (.266 .015) To order panel mounting accessories for customer installation, simply use the part number per Table II. ADJ. SLOT 2.54 LONG (.100) .635 (.020) WIDE .762 (.030) DEEP Example: H83P NOTE: For complete product specifications, see data sheet for the trimmer model. 3.81 (.150) 1.52 TO 3.30 (.06 TO .13) 7.92 (.312) PANEL 3.30 MAX. (0.13) 5.94 (.234) Torque - Apply maximum 8 in. lbs. on mounting nut when mounted on panel. NOTES: NOTES: 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. .194 2. RECOMMEND PANEL HOLES. #10 DRILL (.008) 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. .200 2. RECOMMEND PANEL HOLE SIZE #7 DRILL (.008) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Factory Installed Panel Mount Models RT22/RTR22/RJ22 3250/3252 Models 3292 H and W Styles - 3290 X & W StylesRT24/RTR24 X, L and W Styles 6.10 (.240) 3.05 (.120) 7.62 (.300) 4.06 (.160) BUSHING 10-32 UNF-2A THD. OPT. BEND DOWN ANTIROTATION TAB ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP BUSHING 10-32 UNF-2A THD. OPT. BEND DOWN ANTIROTATION TAB 6.35 (.250) 3.05 (.120) ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP 11.68 (.460) OPT. BEND DOWN ANTIROTATION TAB 13.97 (.550) PANEL 3.3 (.130) MAX 11.43 (.450) 11.68 (.460) 11.43 (.450) PANEL LAYOUT .826 .038 (.033 .020) PANEL 3.3 (.130) MAX 10.16 (.400) PANEL 3.3 (.130) MAX PANEL LAYOUT PANEL LAYOUT .200 = 7 DRILL (.008) .200 = 7 DRILL (.008) 7.37 (.290) .200 = 7 DRILL (.008) .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB NOTES: NOTES: Provided with lockwasher and mounting nut 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP 6.35 (.250) 14.99 (.590) .826 .038 (.033 .020) 6.10 (.240) BUSHING 10-32 UNF-2A THD. 6.35 (.250) 10.92 (.430) 7.37 (.290) Models RT24/RTR24/3290 NOTES: NOTES: 1 Provided with lockwasher and mounting nut 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. NOTES: 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Customer Installed Panel Mount - Unsealed SEE TABLE II FOR PANEL MOUNT PART NUMBER H-58P Panel Mount H-65P Panel Mount 1-1/4 Inch Rectangular Multiturn Modules H-83P Panel Mount 1/2 Inch Square Multiturn Models Adapter for Models 3005 AND 3006 HEX NUT AND LOCKWASHER 10.31 (.406) MAX. 7.62 (.300) 4.06 (.160) BUSHING 10-32 UNF-2A THD. 7.95 (.313) OPT. BEND DOWN ANTIROTATION TAB 33.35 (1.31) The H-83P Adapter is used with Models 3005 and 3006. Order separately and simply snap fit the trimmer in the plastic case. The H-83P with lock-washer and mounting nut is available in 50-piece lots. ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP 6.35 (.250) 6.35 (.250) 13.97 (.550) BUSHING 10-32 NF-2 THD 22.10 (.870) 14.99 (.590) 10.0 (.394) 5/16-32 UNEF THREAD 11.43 (.450) 1.52 3.30 TO (.060) (.130) 5.54 (.218) 3.30 PANEL MAX. (0.13) ADJ. SHAFT RECESSED 5/16 PANEL LAYOUT 5.94 (.234) ADJ. SLOT 2.54 LONG (.100) .635 (.250) WIDE .762 (.030 ) DEEP 7.62 (.300) 10.16 (.400) .200 = 7 DRILL (.008) 9.53 (.375) 9.53 (.375) .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB NOTES: NOTES: NOTES: 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. .194 2. RECOMMEND PANEL HOLES. #10 DRILL (.008) 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. 1. DRAWINGS SHOWN WITH TRIMMER. ORDER PART SEPARATELY 2. DRAWINGS SHOWN WITH TRIMMER. ORDER PART SEPARATELY *SPECIFY H82 IF PANEL SEAL IS REQUIRED. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Customer Installed Panel Mount 3/8 Inch Square Multiturn Models H-114P/115P/116P Panel Mount 3/8 Inch Square Multiturn Models H-117P Panel Mount 6.10 (.240) OPT. BEND DOWN ANTIROTATION TAB ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP BUSHING 10-32 UNF-2A THD. 10.92 (.430) (H-114P) 3005P-1-(RC) 3005P-1-(RC) Z 3006P,Y, or W-1-(RC) 3006P,Y, or W-1-(RC) Z 3009P or Y-1-(RC) 3009P or Y-1-(RC) Z 3057L,J,P, or Y-1-(RC) 3057L,J,P, or Y-1-(RC) M 3059L,J,P, or Y-1-(RC) 3059L,J,P, or Y-1-(RC) M 3250L or W-1-(RC) 3250L or W-1-(RC) M 3252L or W-1-(RC) 3252L or W-1-(RC) M 3290 H or W-1-(RC) 3290H or W-1-(RC) M 3292L,W, or X-1-(RC) 3292L,W, or X-1-(RC) M 11.68 (.460) 3296W or X-1-(RC) 3296W or X-1-(RC) M TABLE II RETRO-FIT PANEL MOUNTS FOR INSTALLATION BY CUSTOMER 8.76 .38 (.345 .015) 8.179 (.322) (H-115P) (H-116P) 2.54 (.100) 2.54 REF. (.100) REF. PANEL P/N WITH PANEL MOUNT 11.68 (.460) 11.68 (.460) 8.255 (.325) (H-114P) ADJ. SLOT 2.44 DIA. (.096) .635 (.025) WIDE .635 (.025) DEEP 6.10 (.240) 11.43 (.450) (H-115P) (H-116P) 6.35 (.250) STANDARD P/N 6.86 (.270) 4.06 (.160) 3.05 (.120) BUSHING 10-32 UNF-2A THD. TABLE I FACTORY INSTALLED PANEL MOUNTS 3.30 MAX. (0.13) STANDARD P/N REF. 5.72 (.225) ORDER PANEL MOUNT P/N 3005P-1-(RC) H-83P 3006P,Y, or W-1-(RC) H-83P 3057L,J,P, or Y-1-(RC) H-58P* SCREW ASSY. PANEL LAYOUT 7.37 (.290) .200 = 7 DRILL (.008) 3059L,J,P, or Y-1-(RC) H-58P* SCREW ASSY. PANEL LAYOUT 7.62 (.300) .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB 5.08 DIA. (.200) 1.32 OPTIONAL FOR (.052) ANTI-ROTATION LUG 3250L, W, X-(RC) H-65P-1* 3252L or W-1-(RC) H-65P-3* 3252X-1-(RC) H-65P-5* 3290 H or W-1-(RC) H-114P* 3292L-1-(RC) H-115P* 3292W OR X-1-(RC) H-116P* RT12P,Y,L H-58P* SCREW ASSY. NOTES: NOTES: RJ12P,Y H-58P* SCREW ASSY. 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. 2. DRAWINGS SHOWN WITH TRIMMER. ORDER PART SEPARATELY 2. DRAWINGS SHOWN WITH TRIMMER. ORDER PART SEPARATELY RT22L,W, X, RTR22L,W, X H-65P-1* RJ22L,W H-65P-3* RJ22X H-65P-5* RT24W / RTR24W OR X H-114P* RJR24W OR X H-117P* *Specify H-82 if panel seal is required. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Hardware For Special Mounting Applications H-26S Side Bracket H-25/H-28 Stacking Straps H-82 Panel Seal For all panel mounts with size 10-32 bushings. Models 3250, 3252 (H-25) and 3292 (H-28). 4.83 (.190) Models 3250 and 3252 This hardware is available for special mounting applications. A STAINLESS STEEL CUP WASHER 9.35 (.368) 13.21 TYP. (.520) B 7.37 (.290) 1.02 (.040) .89 (.035) C .381 (.015) 4.83 (.190) RUBBER O RING 4.57 (.180) 23.62 (.930) 4 PLCS. 12.70 (.500) DIMENSIONS H-25 H-28 A .236 (.093) .363 (.143) 1.321 (.520) .178 (.070) .318 (.125) 1.064 (.419) B C To be used with the following to provide panel seal: H-58P H-65P-1 H-65P-3 H-65P-5 H-114P H-115P H-116P H-117P 9.35 (.368) THICKNESS 4.01 (.158) 6.35 (.250) .51 (.02) 6.35 (.250) 3.81 (.150) .325 (.013) DIA. 2 PLCS. 15.88 (.625) 6.35 (.250) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.