MBR(F,B)1035 thru MBR(F,B)1060 www.vishay.com Vishay General Semiconductor Schottky Barrier Rectifier FEATURES TO-220AC * Low power loss, high efficiency ITO-220AC * Low forward voltage drop * High forward surge capability * High frequency operation 2 2 1 1 MBR10xx MBRF10xx PIN 1 * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PIN 2 TO-263AB K TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, and polarity protection application. 2 1 MBRB10xx PIN 1 PIN 2 * Solder bath temperature 275 C maximum, 10 s, per JESD 22-B106 (for TO-220AC and ITO-220AC package) * AEC-Q101 qualified PIN 1 CASE PIN 2 * Meets MSL level 1, per J-STD-020, LF maximum peak of 245 C (for TO-263AB package) MECHANICAL DATA K HEATSINK Case: TO-220AC, ITO-220AC, TO-263AB Molding compound meets UL 94-V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 35 V, 60 V IFSM 150 A VF 0.57 V, 0.70 V TJ max. 150 C Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 C unless otherwise noted) SYMBOL MBR1035 MBR1045 MBR1050 MBR1060 UNIT Maximum repetitive peak reverse voltage VRRM 35 45 50 60 V Maximum average forward rectified current (Fig.1) IF(AV) 10 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 Peak repetitive reverse current at tp = 2.0 s, 1 kHz IRRM Voltage rate of change (rated VR) dV/dt 10 000 TJ - 65 to + 150 TSTG - 65 to + 175 VAC 1500 PARAMETER Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Revision: 13-Jun-12 1.0 A A 0.5 V/s C V Document Number: 88669 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR(F,B)1035 thru MBR(F,B)1060 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER SYMBOL Maximum instantaneous forward voltage VF Maximum instantaneous reverse current at DC blocking voltage IR (1) (2) MBR1535 TEST CONDITIONS MBR1545 MBR1550 TJ = 25 C IF = 10 A TJ = 125 C 0.57 0.70 IF = 20 A TJ = 25 C 0.84 0.95 IF = 20 A TJ = 125 C 0.72 0.85 Rated VR - MBR1560 IF = 10 A UNIT 0.80 TJ = 25 C 0.10 TJ = 125 C 15 V mA Notes (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Typical thermal resistance from juntion to case SYMBOL MBR MBRF MBRB UNIT RJC 2.0 4.0 2.0 C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC MBR1045-E3/45 1.80 45 50/tube Tube ITO-220AC MBRF1045-E3/45 1.94 45 50/tube Tube TO-263AB MBRB1045-E3/45 1.33 45 50/tube Tube TO-263AB MBRB1045-E3/81 1.33 81 800/reel Tape and reel TO-220AC MBR1045HE3/45 (1) 1.80 45 50/tube Tube ITO-220AC MBRF1045HE3/45 (1) 1.94 45 50/tube Tube TO-263AB MBRB1045HE3/45 (1) 1.33 45 50/tube Tube TO-263AB MBRB1045HE3/81 (1) 1.33 81 800/reel Tape and reel Note (1) AEC-Q101 qualified Revision: 13-Jun-12 Document Number: 88669 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR(F,B)1035 thru MBR(F,B)1060 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 12 100 Instantenous Reverse Current (mA) Average Forward Current (A) Resistive or Inductive Load 10 8 6 4 2 MBR1035 - MBR1045 MBR1050 - MBR1060 1 TJ = 75 C 0.1 TJ = 25 C MBR1035 - MBR1045 MBR1050 - MBR1060 0.01 0.001 0 0 50 100 150 0 20 40 60 80 Case Temperature (C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 175 150 125 100 75 50 25 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 1000 MBR1035 - MBR1045 MBR1050 - MBR1060 100 100 10 1 0.1 0.1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance 100 TJ = 150 C 10 Transient Thermal Impedance (C/W) 100 Instantaneous Forward Current (A) 100 10 000 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Junction Capacitance (pF) Peak Forward Surge Current (A) TJ = 125 C 10 Pulse Width = 300 s 1 % Duty Cycle 1 TJ = 25 C 0.1 MBR1035 - MBR1045 MBR1050 - MBR1060 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 13-Jun-12 Document Number: 88669 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR(F,B)1035 thru MBR(F,B)1060 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN PIN 2 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) CASE 0.110 (2.79) 0.100 (2.54) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 7 REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.037 (0.94) 0.027 (0.68) 7 REF. 2 0.110 (2.79) 0.100 (2.54) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 1 0.160 (4.06) 0.140 (3.56) 0.105 (2.67) 0.095 (2.41) 0.671 (17.04) 0.651 (16.54) PIN 1.148 (29.16) 1.118 (28.40) 2 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 7 REF. 0.076 (1.93) REF. 45 REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) Revision: 13-Jun-12 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) Document Number: 88669 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: MBRB1050/31 MBR1035 MBR1045 MBRB1035 MBRB1045 VS-MBRB1035TRRPBF VS-MBRB1045TRLPBF VS-MBRB1045TRRPBF VS-MBRB1045PBF MBR1035/45 MBR1035-E3/45 MBR1035HE3/45 MBR1045/45 MBR1045-E3/45 MBR1045HE3/45 MBR1050-E3/45 MBR1050HE3/45 MBR1060/45 MBR1060-E3/45 MBR1060HE3/45 MBRB1035/31 MBRB1035/81 MBRB1035-E3/31 MBRB1035-E3/45 MBRB1035-E3/81 MBRB1035HE3/45 MBRB1035HE3/81 MBRB1045/31 MBRB1045/45 MBRB1045/81 MBRB1045-E3/31 MBRB1045E3/45 MBRB1045-E3/81 MBRB1045HE3/45 MBRB1045HE3/81 MBRB1050/45 MBRB1050/81 MBRB1050-E3/45 MBRB1050-E3/81 MBRB1050HE3/45 MBRB1050HE3/81 MBRB1060/31 MBRB1060/45 MBRB1060/81 MBRB1060E3/31 MBRB1060-E3/45 MBRB1060-E3/81 MBRB1060HE3/45 MBRB1060HE3/81 MBRF1045-E3/45 MBRF1045HE3/45 MBRF1050-E3/45 MBRF1050HE3/45 MBRB1035TRL MBRB1035TRR MBRB1045TRL MBRB1045TRR MBR1050/45 MBRB1035/45 VS-MBR1035PBF VS-MBR1045PBF VS-MBRB1035TRLPBF