221 WEST INDUSTRY COURT
DEER PARK, NY 11729-4681
PHONE (631) 586-7600
FAX (631) 242-9798
World Wide Web - http://www.sensitron.com
E-mail Address - sales@sensitron.com
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1005, REV. -
HERMETIC POWER SCHOTTKY RECTIFIER
DESCRIPTION: A 100 VOLT, 15 AMP, POWER SCHOTTKY RECTIFIER IN A SHD-4/4A/4B PACKAGE.
MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25
C UNLESS OTHERWISE SPECIFIED.
RATING SYMBOL MAX. UNITS
PEAK INVERSE VOLTAGE PIV 100 Volts
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC)
(Common Cathode) (per leg)
IO15 Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t=8.3ms, Sine) IFSM 280 Amps
MAXIMUM JUNCTION CAPACITANCE (Vr =5V) CT500 pF
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) R
JC 0.85 C/W
MAXIMUM OPERATING TEMPERATURE RANGE Top -65 to
+ 175
C
MAXIMUM STORAGE TEMPERATURE RANGE Tstg -65 to
+ 175
C
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC SYMBOL MAX. UNITS
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps)
TJ = 25 C
TJ = 125 C
Vf0.86
0.67
Volts
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 30 Amps)
TJ = 25 C
TJ = 125 C
Vf1.05
0.81
Volts
MAXIMUM REVERSE CURRENT (Ir @ 100V PIV)
TJ = 25 C
TJ = 125 C
Ir0.55
12
mA
SHD117224P
SHD117224AP
SHD117224BP
221 WEST INDUSTRY COURT
DEER PARK, NY 11729-4681
PHONE (631) 586-7600
FAX (631) 242-9798
World Wide Web - http://www.sensitron.com
E-mail Address - sales@sensitron.com
SENSITRON
DATA SHEET 1005, REV. -
MECHANICAL DIMENSIONS: in inches / mm
COMMON CATHODE
2 1 3
SHD117224P
SHD117224AP
SHD117224BP
SHD-4
.290±.010
(7.37±.254)
2
3
.350±.010
(8.89±.254)
.020±.010
(.508±.254)
.110 (2.80) Max Alumina Ring
Terminal 1
2
3
.290±.010
(7.37±.254)
.350±.010
(8.89±.254)
.065±.010
(1.65±.254)
.110 (2.79) Max
Alumina Ring
.440±.020
(11.2±.508)
.185±.010
(4.70±.254)
.020±.010
(.508±.254)
Moly Lid
Moly Base
Terminal 1
.060±.010
(1.52±.254)
.020±.002
(.508±.051)
.020±.005 R
(.508±.127 )
2
3
.290±.010
(7.37±.254)
.350±.010
(8.89±.254)
.090±.010
(2.29±.254)
.130 (3.30) Max
Alumina Ring
.440±.020
(11.2±.508)
.185±.010
(4.70±.254)
.020±.010
(.508±.254)
Moly Lid
Moly Base
Terminal 1
.060±.010
(1.52±.254)
.015±.002
(.381±.051)
.020±.005
(.508±.127 )
Copper Terminals
SHD-4A
SHD-4B
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that ma y result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or an y third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
