UNCONIFOALLED DOCUMENT WHEN WORKING WITH THIS PART. CAUTION: STATIC SENSITIVE DEVICE FOLLOW PROPER E.S.D. HANDLING PROCEDURES h 40.95 [1596] + UNDER REVISION CHARACTER DETAIL SC:1 LCMSO1602DSR35480 A PART NUMBER REV. REV. E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. #11524, 08.12.08 2.96 [O1165] 4 O56 [0.0220] 0.59 [0.0232] r 0.66 [0.0260] 0.38 [0.0150] 9.94 [0.2339] NOTES: 3.06 [0.2189] 3.55 [0.1398] 4 CU] 0.04 [0.0016] | 0.04 [0.0016] 4 7 2.00 [0,099] | (2 PLS) REV. I 66.00 [2.5998] V.A. = 71,20 [2,803] = 73.00 [2.953] =. 80,0040,.50 3.150+0,020] __+1 tr= 150 [0,059] 16-41,00 [0,039] 8.00 [0,315] 33.02 [1.300] + CPAD @180 10.16 [0,400] P2.54 [0.100]x13 #2,50 [80,098] (pe54 x 4) \ 4 PLSD | | 1 eel ddd Woy), , o 250 coo9s] | | - (2 PLSD Z 36.00+0,50 31.00 [1.220] } g [1.417+0,020] 16.00 [0,630] | | | | | | | VA. | rl rl I i 25.20 [0.992] t H ie 1150 [0.453] 4 i ny rie a] \ 17.70 [0.6971 Je 56.21 [2,213] __> \L @1.00 (40.039) S PLS) UNCOMIFOLLED DOCUMENT SUNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X=+1 (40.038), XX=10.5 (40.020), XXX=0.25 (0.010), XXXX=+0.127 (40.005). LEAD SIZE=#0.08 (40.002), LEAD LENGTH=+0.75 (0.050). MIN= *REGIWAL PRECISION yay. +000 1, HEADER SIDE WITH 0.635mm DIAMETER PIN 10 BE INSERTED INTO PCB. @80 [0.346] 4.80 [0.189] of 0.45 [0,014] \ 14 PIN MILL MAX PART#3530-10-164-00001000 fa] OR EQUIVALENT. (tj | 1,60 [0,063] m 4,80 [0.189] ) PART NUMBER A LOMS01602DS5SK45480 STN, REFLECTIVE, MILL MAX HEADER, 6:00 VIEW, CONFIDENTIAL _ INFORMATION THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL KEEP ALL INFORMATIGN CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLGSURE AND DISSEMINATION TO ALL THIRD PARTIES. REUABILITY_ NOTE . . . 5.56mm CHARACTER HEIGHT. 5 x & DOT MATRIX OUR MANY YEARS OF EXPERIENCE DATA ACCUMULATION INDICATE THAT DRAWN BY: CHECKED BY: JAPPROVED BY:/DATE: 09.26.06 36 x 2 LCD MODULE 1/16 DUTY, 1/5 BIAS , SOLDER HEAT IS A MAJOR CAUSE OF EARLY AND FUTURE FAILURE. PAGE: 1 OF 2 s . PLEASE PAY ATTENTION TO YOUR SOLDERING PROCESS. JD SCALE: N/A Lene. eS eee ee . ei _ 290 E. HELEN ROAD PALATINE, IL 60057-5976 PHONE: +1.847.359.2790 US WEB: www.lumex.com TW WEB: www.lumex.com.tw UNCONTROLLED DOCUMENT PIN CONFIGURATION UNDER REVISION sci PART NUMBER REV. LCMS01602DSR35480 A REV. | E.c.N. NUMBER AND REVISION COMMENTS DATE SEE _ON PAGE ONE. PIN NO.[ SYMBOL | LEVEL [FUNCTION 1 Vss = GND (QV) 2 | oo = POWER SUPPLY | 5V \pp-Vo: LCD DRIVING VOLTAGE BLOCK DIAGRAM. 16 x 2, 1/16 DUTY, 1/5 BIAS 3 Vo - FOR LCD DRIVE VR: 10K. -20Kn REGISTER SELECT SIGNAL Von 0g 7 4 RS H/L | Hs DATA INPUT iL 0B 0 L: INSTRUCTION INPUT 5 aw | H/L_ [te DATA READ (MODULE>MPU) 0 R Mi CONTROLLER ee 80 L: DATA WRITE (MODULE<-MPU) Ves RS LSI 6 E | H,H>L | ENABLE Vs k 714 |DB0~DB7| H/L | DATA BUSSOFTWARE SELECTABLE 4 OR 8 BIT MODE. VDD priver [COM 16, LCD PANEL 15 = Vo 16 = ELECTRICAL CHARACTERISTICS Vpp=4-7V to 5.3V, TA=25C STANDARD VALUE ITEM SYMBOL | CONDITION UNIT MIN. | TYP. | MAX. SUPPLY VOLTAGE FOR LOGIC Vppvss = - | 50] - v SUPPLY CURRENT FOR LOGIC Dp Vop=5 - | 20] 30 | mA ABSOLUTE MAXIMUM RATINGS \ HIGH Vin = 22 | - [von] Vv TEST | STANDARD VALUE UNIT INPUT VOLTAGE LOW VIL - o | - [os V TEM SYMBOL | conpirion | MIN | MAX HIGH Vou = 24f- | - v SUPPLY VOLTAGE FOR LOGIC VppVss | Ta=2e | 47 | 53 | V OUTPUT VOLTAGE LOW VoL = - | - [04 V SUPPLY VOLTAGE FOR LCD DRIVE | VppVo |a.2@50c] 4.80] Vv INPUT VOLTAGE 7 Ta=25'0 | vss | Vop | V LOM-S 0 50 | *C OPERATING TEMPERATURE Tope aa Pag he iew-s | -20 | 70 | STORAGE TEMPERATURE sty eqcq cap tgs Te UNCONTROLLED DOCUMENT UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X=t1 (40.038), XX=<D5 (40.020), X.XX=10.25 (40.010), XXXX=#0.127 (40.005). LEAD SIZE=#0.05 (140.002), LEAD LENGTH=+0.75 (0,030). WIN= *DEGIMAL PRECISION yyy +0000 REV. PART NUMBER LCMS01 602D5SR35480 STN, REFLECTIVE, MILL MAX HEADER, 6:00 VIEW, 5.56mm_ CHARACTER HEIGHT, 5 x 8 DOT MATRIX, 16 x 2 LCD MODULE, 1/16 DUTY, 1/5 BIAS. CONFIDENTIAL_INFORMATION THE INFORMATIGN CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC,, THE HOLDER OF THIS DOCUMENT SHALL KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. RELIABILITY NOTE OUR MANY YEARS OF EXPERIENCE DATA ACCUMULATION INDICATE THAT SOLDER HEAT IS A MAJGR CAUSE OF EARLY AND FUTURE FAILURE. PLEASE PAY ATTENTION TO YOUR SOLDERING PROCESS. DRAWN BY: CHECKED BY: JD 290 E. HELEN ROAD PALATINE, IL PHONE: +1.847.359.2790 US WEB: www.lumex.com TW WEB: www.lumex.com.tw 60067-6976 APPROVED BY: DATE: 09.26.06 PAGE: 2 OF 2 SCALE: N/A