SPEC NO: DSAD0151 REV NO: V.4 DATE: NOV/19/2005 PAGE: 1 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI
Package Dimensions &
& &
& Internal Circuit Diagram
Description
The Super Bright Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.
P/N: KPSC03-102 SUPER BRIGHT GREEN
SURFACE MOUNT DISPLAY
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
Features
0.3 INCH DIGIT HEIGHT.
LOW CURRENT OPERATION.
EXCELLENT CHARACTER APPEARANCE.
I.C. COMPATIBLE.
MECHANICALLY RUGGED.
GRAY FACE,WHITE SEGMENT.
PACKAGE : 550PCS / REEL.
RoHS COMPLIANT.
SPEC NO: DSAD0151 REV NO: V.4 DATE: NOV/19/2005 PAGE: 2 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI
Selection Guide
Part No. Dice Lens Type Iv (ucd)
@ 10mA
Min. Typ.
KPSC03-102 SUPER BRIGHT GREEN (GaP) WHITE DIFFUSED 1200 5600 Common Cathode, Rt.
Hand Decimal
Description
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Super Bright Green 565 nm IF=20mA
λDDominant Wavelength Super Bright Green 568 nm IF=20mA
∆λ1/2 Spectral Line Half-width Super Bright Green 30 nm IF=20mA
C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz
VFForward Voltage Super Bright Green 2.2 2.5 V IF=20mA
IRReverse Current Super Bright Green 10 uA VR = 5V
Parameter Super Bright Green Units
Power dissipation 105 mW
DC Forward Current 25 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAD0151 REV NO: V.4 DATE: NOV/19/2005 PAGE: 3 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI
Super Bright Green KPSC03-102
SPEC NO: DSAD0151 REV NO: V.4 DATE: NOV/19/2005 PAGE: 4 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI
KPSC03-102
Recommended Soldering Pattern
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Tape Specifications
(Units : mm)
