Specifications
General
Product code EXPI9404PF4
Connectors Four LC Fiber optic connectors
IEEE standards/network topology 1000BASE-SX
Wiring Multi-mode fiber
(62.5 µm or 50 µm)
Adapter Product Features
Intel® PROSet Utility and Intel® PRO •
Intelligent Install for easy installation
Intel® lead-free1technology •
Plug and play specification support Standard
Auto-negotiation, full-duplex capable •
Intel® I/OAT2•
Integrated media access control (MAC) •
and serdes
Includes a full-height bracket •
RoHs3•
Cable distance 275 m at 62.5 µm; 550 m at 50 µm
Network Management
Wired for Management (WfM) baseline •
v2.0 enabled for servers
DMI 2.0 support, Windows Management •
Instrumentation (WMI) and
SNMP-manageable SMBus support
Remote Installation Services (RIS) •
Diagnostics (loopback, testability, •
PHY register access)
Advanced configuration and power •
interface (ACPI) 1.0 power management
Wake on LAN* support over PCI Express* •
PXE 2.0 enabled through boot read-only •
memory (ROM)
Network Operating Systems (NOS) Software Support
Microsoft Windows* Server 2003, •
Enterprise, Datacenter (32- and 64-bit)
Microsoft Windows 2000 •
Red Hat Linux* 2.4x or later (32- and 64-bit) •
FreeBSD* 4.x or later •
Novell Netware* •
Sun Solaris* x86, OS 8 and later •
SCO Open Server 5, OpenUNIX 8*
Intel Backing
Limited lifetime warranty •
90-day, money-back guarantee •
(U.S. and Canada)
Advanced Software Features
Adapter fault tolerance (AFT) •
Switch fault tolerance (SFT) •
Adaptive load balancing (ALB) •
Fast EtherChannel*5(FEC) •
Gigabit EtherChannel*5(GEC) •
Teaming support Scales up to 8 connections
Multiple teams Supports 4 separate teams,
maximum
IEEE 802.3ad* (link aggregation •
control protocol)5
Test switch configuration Tested with major switch original
equipment manufacturers (OEMs)
PCIe Hot Plug*/Active peripheral •
component interconnect (PCI)
IEEE 802.1Q* VLANs •
IEEE 802.3* (z, ab, u, x) flow control support •
TCP checksum offload — transmission •
control protocol (TCP), user datagram
protocol (UDP), Internet protocol (IP)
IEEE 802.1p* •
TCP segmentation/large send offload •
Interrupt moderation •
Technical Features
Data rate(s) supported per port 1000 Mbps
Bus type PCI Express 1.0a
Bus width x4 lane PCI Express, operable
in x4, x8, x16 slots
Bus speed (x4, encoded rate) 10 Gbps uni-directional;
20 Gbps bi-directional
EEPROM-SPI and single EEPROM support •
Interrupt levels INTA, INTB, INTC, INTD
IEEE support 802.3ab*
Hardware certifications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller-processor Intel® 82571GB
Typical power consumption 4.95 W (3.3 V @ 1.5 A)
Operating temperature 0–55° C
LEDs 4 (1/port, link and speed) solid
and blinking
Physical Dimensions
Length 16.76 cm (6.6 in)
Width 1.91 cm (0.75 in)
Height of end bracket 5.97 cm (2.35 in)
The Intel PRO/1000 PF Quad Port Server Adapter represents the
sixth generation of Intel® network adapters for Gigabit Ethernet
over fiber optic cabling. For easy installation and management, all
Intel® PRO Network Connections are supported by Intel® PRO
Intelligent Install and the new Intel® PROSet Utility for Windows*
Device Manager. Intel PROSet simplifies adapter installation and
gives you point-and-click power to configure and manage all your
Intel PRO Network Connections for connectivity you can count on.