123 SAL-A www.vishay.com Vishay BCcomponents Aluminum Capacitors Solid Axial FEATURES 123 SAL-A 128 SAL-RPM Radial higher CV/volume Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (O D x L in mm) 6.7 x 15.3 to 12.9 x 32.0 Rated capacitance range (E6 series), CR Tolerance on CR 6.3 V to 40 V Category temperature range - 55 C to + 125 C Useable temperature range - 80 C to + 200 C Endurance test at 155 C and 125 C 5000 h and 8000 h Useful life at 125 C 20 000 h Useful life at 40 C, IR applied 450 000 h Shelf life at 0 V, 125 C Based on sectional specification Climatic category IEC 60068 * EDP, telecommunication, industrial high temperature, automotive, military and space * Smoothing, filtering, buffering, timing * For power supplies, DC/DC converters MARKING 500 h IEC 60384-4/EN130300 55/125/56 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. APPLICATIONS 1.0 F to 1000 F 20 %; 10 % on request Rated voltage range, UR * Polarized aluminum electrolytic capacitors, solid electrolyte MnO2 * Axial leads, aluminum case, ceramic seal, blue insulation sleeve Available * SAL-A: standard version * SAL-AG: epoxy filled shock-proof version up to 10 000 g * Extremely long useful life: 20 000 h at 125 C * Extended high temperature range up to 200 C * Excellent low temperature impedance and ESR behaviour * Charge and discharge proof, application with 0 resistance allowed * Reverse DC voltage up to 0.3 x UR allowed * AC voltage up to 0.8 x UR allowed * Advanced technology to achieve high reliability and high stability * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance code on rated capacitance, code letter in accordance with IEC 60062 (M = 20 %, K = 10 %) * Rated voltage (in V) at corresponding maximum temperature * Date code in accordance with IEC 60062 * Name of manufacturer * Code for factory of origin * Band to indicate the negative terminal * "+" sign to identify the positive terminal * Series number SELECTION CHART FOR CR, UR, AND RELEVANT MAXIMUM CASE SIZES (O D x L in mm) CR (F) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 Revision: 05-May-13 6.3 10 6.3 - 10 - UR (V) AT Tamb = 85 C 16 25 UC (V) AT Tamb = 125 C 16 25 6.7 x 15.3 6.7 x 15.3 6.7 x 15.3 6.7 x 15.3 35 40 25 6.7 x 15.3 6.7 x 15.3 6.7 x 15.3 6.7 x 15.3 6.7 x 15.3 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4 25 6.7 x 15.3 6.7 x 15.3 6.7 x 15.3 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4 Document Number: 28355 1 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT MAXIMUM CASE SIZES (O D x L in mm) 6.3 10 6.3 6.7 x 15.3 6.7 x 15.3 7.6 x 20.4 9.4 x 23.3 10.3 x 32.0 12.9 x 32.0 10 6.7 x 15.3 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4 9.4 x 23.3 9.4 x 23.3 10.3 x 32.0 10.3 x 32.0 12.9 x 32.0 12.9 x 32.0 CR (F) 22 33 47 68 100 150 220 330 470 680 1000 UR (V) AT Tamb = 85 C 16 25 UC (V) AT Tamb = 125 C 16 25 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4 7.6 x 20.4 7.6 x 20.4 7.6 x 20.4 7.6 x 20.4 9.4 x 23.3 9.4 x 23.3 9.4 x 23.3 9.4 x 23.3 10.3 x 32.0 10.3 x 32.0 12.9 x 32.0 10.3 x 32.0 12.9 x 32.0 - 35 40 25 7.6 x 20.4 9.4 x 23.3 9.4 x 23.3 10.3 x 32.0 12.9 x 32.0 12.9 x 32.0 - 25 9.4 x 23.3 9.4 x 23.3 10.3 x 32.0 10.3 x 32.0 12.9 x 32.0 - DIMENSIONS in millimeters AND AVAILABLE FORMS OD Od Lmax. F BA: taped in box (ammopack) BR: taped on reel 73 Fig. 2 - Forms: BA and BR Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES CASE MAXIMUM SIZE O D x L (1) 6.7 x 15.3 7.6 x 20.4 9.4 x 23.3 10.3 x 32.0 12.9 x 32.0 CODE 1 2A 4 5 6 Fmax. Od MASS (2) (g) 20.0 22.5 25.0 35.0 35.0 0.6 0.6 0.6 0.8 0.8 1.05 1.55 2.60 4.20 7.00 PACKAGING QUANTITIES FORM BA FORM BR 100 800 100 800 100 500 100 500 100 400 Notes (1) For epoxy-filled versions add 1 mm to stated L max.. (2) Add 10 % for SAL-AG epoxy-filled versions. * Detailed tape dimensions see www.vishay.com/doc?28361. CARDBOARD BOX DIMENSIONS, L x W x H (mm) SOLID TYPES FORM BA 6.7 x 15.3 7.6 x 20.4 9.4 x 23.3 10.3 x 32.0 12.9 x 32.0 110 x 95 x 70 110 x 95 x 70 110 x 95 x 85 160 x 95 x 85 160 x 95 x 120 SOLID TYPES FORM BR all Revision: 05-May-13 370 x 370 x 115 Document Number: 28355 2 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com ELECTRICAL DATA SYMBOL CR IR IL5 tan ESR Z DESCRIPTION Rated capacitance at 100 Hz Max. RMS ripple current, no necessary DC voltage applied Max. leakage current after 5 min at UR Max. dissipation factor at 100 Hz Max./typ. equivalent series resistance at 100 Hz Max. impedance at 100 kHz Note * Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 to 25 C, P = 86 to 106 kPa, RH = 45 to 75 %. Vishay BCcomponents ORDERING EXAMPLE Electrolytic capacitors 123 series 10 F/16 V; 20 % Maximum case size: O 6.7 x 15.3 mm; form BR for lead (Pb)-free: Ordering code: MAL2 123 25109 E3 Former 12NC: 2281 123 25109 for non lead (Pb)-free: Ordering code: MAL2 123 25109 Former 12NC: 2222 123 25109 Table 2 ELECTRICAL DATA AND ORDERING INFORMATION for 123 series UC UR (V) (V) 6.3 6.3 10 10 16 16 25 25 ORDERING CODE MAL2123.....E3 LEAD (Pb)-FREE MAL2123 ..... NON LEAD (Pb)-FREE MAX. IR IR IR MAX. TYP. IL5 CR Z CASE SAL-AG (1) tan 100 Hz 10 kHz 100 kHz ESR ESR SAL-AG (1) SAL-A SAL-A 100 Hz SIZE FORM 125 C 85 C 40 C 5 min 100 Hz 100 Hz 100 Hz 100 kHz FORM FORM FORM () (F) ODxL (A) BA (mA) (mA) (mA) () () BA BR BA (mm) TOL. TOL. TOL. TOL. 10 % 20 % 20 % 20 % LEVEL S 47 6.7 x 15.3 58 440 640 15 0.18 7.6 3.0 1.2 13479 23479 83479 63479 68 6.7 x 15.3 83 520 760 21 0.18 5.3 2.6 1.2 13689 23689 83689 63689 150 7.6 x 20.4 160 870 1270 47 0.18 2.4 1.5 1.0 13151 23151 83151 63151 330 9.4 x 23.3 330 1470 2140 104 0.18 1.1 0.55 0.4 13331 23331 83331 63331 680 10.3 x 32.0 680 2340 3410 214 0.18 0.55 0.28 0.3 13681 23681 83681 63681 1000 12.9 x 32.0 940 3180 4640 315 0.18 0.36 0.19 0.2 13102 23102 83102 63102 33 6.7 x 15.3 63 360 530 17 0.18 11 3.8 1.2 14339 24339 84339 64339 47 6.7 x 15.3 83 440 640 24 0.18 7.6 4.0 1.2 14479 24479 84479 64479 68 7.6 x 20.4 110 590 850 34 0.18 5.3 2.5 1.0 14689 24689 84689 64689 100 7.6 x 20.4 160 710 1040 50 0.18 3.6 1.8 1.0 14101 24101 84101 64101 150 9.4 x 23.3 240 990 1450 75 0.18 2.4 0.9 0.4 14151 24151 84151 64151 220 9.4 x 23.3 350 1180 1720 110 0.18 1.7 0.6 0.4 14221 24221 84221 64221 330 10.3 x 32.0 490 1650 2410 165 0.18 1.1 0.45 0.3 14331 24331 84331 64331 470 10.3 x 32.0 570 1940 2830 235 0.18 0.8 0.35 0.3 14471 24471 84471 64471 680 12.9 x 32.0 760 2580 3750 340 0.18 0.55 0.25 0.2 14681 24681 84681 64681 1000 12.9 x 32.0 1000 3380 4920 500 0.18 0.36 0.18 0.2 14102 24102 84102 64102 10 6.7 x 15.3 31 230 330 16 0.14 28 8.0 2.5 15109 25109 85109 65109 15 6.7 x 15.3 47 280 400 24 0.14 19 5.5 2.5 15159 25159 85159 65159 22 6.7 x 15.3 63 340 490 35 0.14 13 5.5 2.5 15229 25229 85229 65229 33 7.6 x 20.4 89 470 680 55 0.14 8.4 3.0 2.0 15339 25339 85339 65339 47 7.6 x 20.4 120 560 810 75 0.14 5.9 2.6 2.0 15479 25479 85479 65479 68 7.6 x 20.4 180 670 970 110 0.14 4.1 2.5 2.0 15689 25689 85689 65689 100 9.4 x 23.3 260 920 1340 160 0.14 2.8 1.5 0.8 15101 25101 85101 65101 150 9.4 x 23.3 310 1060 1550 240 0.16 2.1 0.7 0.8 15151 25151 85151 65151 220 10.3 x 32.0 420 1420 2060 350 0.16 1.5 0.55 0.6 15221 25221 85221 65221 330 10.3 x 32.0 510 1740 2530 500 0.16 1.0 0.35 0.6 15331 25331 85331 65331 470 12.9 x 32.0 680 2280 3330 750 0.16 0.7 0.25 0.4 15471 25471 85471 65471 10 6.7 x 15.3 43 230 330 25 0.14 28 13.0 5 16109 26109 86109 66109 15 6.7 x 15.3 60 280 400 35 0.14 19 10.0 5.0 16159 26159 86159 66159 22 7.6 x 20.4 88 370 550 55 0.14 13 7 2.5 16229 26229 86229 66229 33 7.6 x 20.4 130 470 680 85 0.14 8.4 5 2.5 16339 26339 86339 66339 47 7.6 x 20.4 160 560 810 100 0.14 5.9 3.5 2.5 16479 26479 86479 66479 68 9.4 x 23.3 230 760 1110 170 0.14 4.1 1.8 1.0 16689 26689 86689 66689 100 9.4 x 23.3 250 860 1250 250 0.16 3.2 1.0 1.0 16101 26101 86101 66101 150 10.3 x 32.0 350 1200 1740 400 0.16 2.1 1.2 0.8 16151 26151 86151 66151 220 12.9 x 32.0 460 1560 2270 550 0.16 1.5 0.85 0.6 16221 26221 86221 66221 Revision: 05-May-13 Document Number: 28355 3 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION for 123 series ORDERING CODE MAL2123.....E3 LEAD (Pb)-FREE MAL2123 ..... NON LEAD (Pb)-FREE MAX. IR IR IR MAX. TYP. CR IL5 Z CASE SAL-AG (1) tan UC UR 100 Hz 10 kHz 100 kHz ESR ESR SAL-A SAL-A SAL-AG (1) SIZE FORM (V) (V) 100 Hz 125 C 85 C 40 C 5 min 100 Hz 100 Hz 100 Hz 100 kHz FORM FORM FORM () (F) ODxL (A) BA (mA) (mA) (mA) () () BA BR BA (mm) TOL. TOL. TOL. TOL. 10 % 20 % 20 % 20 % LEVEL S 1.0 6.7 x 15.3 4 55 80 5 0.12 240 105 16.5 10108 20108 80108 60108 1.5 6.7 x 15.3 7 68 98 5 0.12 160 40.60 11.0 10158 20158 80158 60158 2.2 6.7 x 15.3 10 82 120 5 0.12 109 30 7.5 10228 20228 80228 60228 3.3 6.7 x 15.3 14 100 150 7 0.12 73 28 7.5 10338 20338 80338 60338 4.7 6.7 x 15.3 20 120 170 10 0.12 51 20 7.5 10478 20478 80478 60478 6.8 6.7 x 15.3 27 140 210 15 0.12 35 16 7.5 10688 20688 80688 60688 10 7.6 x 20.4 37 200 280 20 0.12 24 10 2.5 10109 20109 80109 60109 25 35 15 7.6 x 20.4 53 240 350 30 0.12 16 8 2.5 10159 20159 80159 60159 22 7.6 x 20.4 78 290 420 45 0.12 11 7 2.5 10229 20229 80229 60229 33 9.4 x 23.3 120 410 590 65 0.12 7.2 3 1.0 10339 20339 80339 60339 47 9.4 x 23.3 140 480 700 95 0.12 5.1 2.9 1.0 10479 20479 80479 60479 68 10.3 x 32.0 170 570 820 135 0.16 4.7 2.1 0.8 10689 20689 80689 60689 100 12.9 x 32.0 220 760 1100 200 0.16 3.2 1.7 0.6 10101 20101 80101 60101 150 12.9 x 32.0 290 990 1440 300 0.16 2.1 1.0 0.6 10151 20151 80151 60151 2.2 6.7 x 15.3 11 82 120 9 0.12 109 38 7.5 17228 27228 87228 67228 3.3 6.7 x 15.3 16 100 150 13 0.12 73 25 7.5 17338 27338 87338 67338 4.7 6.7 x 15.3 22 120 170 19 0.12 51 20 7.5 17478 27478 87478 67478 6.8 6.7 x 15.3 28 140 210 27 0.12 35 15 7.5 17688 27688 87688 67688 10 7.6 x 20.4 41 200 280 40 0.12 24 11 2.5 17109 27109 87109 67109 15 7.6 x 20.4 61 240 350 60 0.12 16 7 2.5 17159 27159 87159 67159 25 40 22 9.4 x 23.3 89 330 480 90 0.12 11 4 1.5 17229 27229 87229 67229 33 9.4 x 23.3 120 410 590 130 0.12 7.2 2.9 1.0 17339 27339 87339 67339 47 10.3 x 32.0 160 540 790 190 0.12 5.1 2.7 1.0 17479 27479 87479 67479 68 10.3 x 32.0 170 570 820 270 0.16 4.7 2.3 0.8 17689 27689 87689 67689 100 12.9 x 32.0 220 760 1100 400 0.16 3.2 1.6 0.6 17101 27101 87101 67101 Note (1) SAL-AG types are epoxy-filled. ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Maximum peak AC voltage, reverse voltage applied Maximum peak AC voltage, without reverse voltage applied CONDITIONS VALUE Us 1.15 x UR Urev < 0.3 x UR 2V Tamb 85 C at: f 0.1 Hz 0.1 Hz < f 1 Hz 1 Hz < f 10 Hz 10 Hz < f 50 Hz f > 50 Hz 85 C < Tamb 125 C at: f 0.1 Hz 0.1 Hz < f 1 Hz 1 Hz < f 10 Hz 10 Hz < f 50 Hz f > 50 Hz 0.30 x UR 0.45 x UR 0.60 x UR 0.65 x UR 0.80 x UR 0.15 x UR 0.22 x UR 0.30 x UR 0.32 x UR 0.40 x UR Current Maximum leakage current After 5 min at UR and Tamb = 25 C IL5 0.05 CR x UR or 2 A, whichever is greater; see Table 2 Typical leakage current After 15 s at UR and Tamb = 25 C: UR = 6.3 V to 16 V UR = 25 V to 40 V 0.2 x value stated in Table 2 0.1 x value stated in Table 2 Revision: 05-May-13 Document Number: 28355 4 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com Vishay BCcomponents VOLTAGE RIPPLE CURRENT (IR) 40 (1) 35 (2) (1) UC = 125 C UC = 175 C (2) Tamb PARAMETER 25 C 40 C 65 C 85 C 105 C 125 C UR (V) IR multiplier 25 1.1 1.0 0.88 0.75 0.59 0.37 Notes Applying the maximum RMS ripple current given in Table 2 will cause a device temperature of 138 C. (2) The 100 kHz values in Table 2 for other temperatures are to be calculated with the above IR multipliers. (1) 16 10 6.3 4 0 - 50 0 50 85 100 125 150 175 Tamb (C) Fig. 3 - Maximum permissible voltage up to 175 C LEAKAGE CURRENT 10 2 10 reverse voltage I I01 I I 02 10 1 1 10 -1 I01 = leakage current during continuous operation at UR and Tamb = 25 C - 50 0 50 150 100 10-1 I02 = leakage current at UR at a discrete constant temperature - 0.4 0 0.4 Tamb (C) Fig. 5 - Typical multiplier of leakage current as a function of U/UR DISSIPATION FACTOR (tan ) 1.1 standard deviation C C0 1.0 0.9 2.4 tan tan 0 2.0 Typical tan at 100 Hz and Tamb = 25 C: 0.6 x value stated in Table 2 standard deviation CAPACITANCE (C) 1.6 1.2 0.8 0.05 0.4 0.8 C0 = capacitance at 25 C and 100 Hz 0 40 80 0 120 160 200 Tamb (C) Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature Revision: 05-May-13 0.25 0 0 - 40 0.8 UR Fig. 4 - Typical multiplier of leakage current as a function of ambient temperature - 80 U - 80 - 40 0 40 80 120 160 200 Tamb (C) Fig. 7 - Typical multiplier of dissipation factor as a function of ambient temperature Document Number: 28355 5 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com Vishay BCcomponents MAXIMUM POWER DISSIPATION MAXIMUM CASE SIZE ODxL (mm) Pmax. = P125 (W) 6.7 x 15.3 0.13 7.6 x 20.4 0.16 9.4 x 23.3 0.21 10.3 x 32.0 0.26 12.9 x 32.0 0.32 EQUIVALENT SERIES INDUCTANCE (ESL), f = 10 MHz MAXIMUM CASE SIZE ODxL (mm) PITCH (mm) MAX. ESL (nH) TYP. ESL (nH) 6.7 x 15.3 20.3 30 15 to 23 7.6 x 20.4 25.4 30 16 to 24 9.4 x 23.3 27.9 35 20 to 27 10.3 x 32.0 35.6 40 26 to 33 12.9 x 32.0 35.6 55 32 to 49 IMPEDANCE (Z) Typical impedance at 100 kHz and Tamb = 25 C: 0.5 x value stated in Table 2. 3.5 Z 1 Z0 3.0 2 3 2.5 1 2.0 2 3 - 55 C 1.5 - 25 C + 25 C 1.0 3 + 85 C 0.5 2 1 3 + 175 C 2 1 0 10 10 2 10 3 10 4 10 5 1 1 4 7 10 10 6 f (Hz) 10 7 10 3 standard deviation (%) Curve 1: Case O D x L = 6.7 mm x 15.3 mm and 7.6 mm x 20.4 mm; 16 V to 40 V Curve 2: Case O D x L = 6.7 mm x 15.3 mm and 7.6 mm x 20.4 mm; 6.3 V to 10 V Curve 3: Case O D x L = 9.4 mm x 32.0 mm, 10.3 mm x 32.0 mm and 12.9 mm x 32.0 mm Z0 = Initial impedance value at any frequency and Tamb = 25 C Fig. 8 - Typical multiplier of impedance as a function of frequency at different ambient temperatures Revision: 05-May-13 Document Number: 28355 6 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com Vishay BCcomponents IMPEDANCE (Z) 103 104 Z () Curve 1: 10 F, 16 V Curve 2: 15 F, 16 V Curve 3: 22 F, 16 V Curve 4: 33 F, 10 V Curve 5: 47 F, 6.3 and 10 V Curve 6: 68 F, 6.3 V 1 2 3 4 5 6 102 Z () 102 1 10 Case O D x L = 6.7 x 15.3 mm; UR = 25 to 40 V Case O D x L = 6.7 x 15.3 mm; UR = 6.3 to 16 V 10-1 1 2 3 4 5 6 103 10 Curve 1: 2.2 F, 35 and 40 V Curve 2: 3.3 F, 40 V Curve 3: 4.7 F, 35 and 40 V Curve 4: 6.8 F, 35 and 40 V Curve 5: 10 F, 25 V Curve 6: 15 F, 25 V 1 102 10 103 104 105 106 f (Hz) 107 10 102 103 104 105 Tamb = 25 C Tamb = 25 C Fig. 9 - Typical impedance as a function of frequency Fig. 10 - Typical impedance as a function of frequency 103 103 Curve 1: 33 F, 16 V Curve 2: 47 F, 16 V Curve 3: 68 F, 10 V Curve 4: 100 F, 6.3 and 10 V Curve 5: 150 F, 6.3 V Z () 102 1 2 3 4 5 10 Z () Curve 1: 10 F, 35 and 40 V Curve 2: 15 F, 35 and 40 V Curve 3: 22 F, 25 and 40 V Curve 4: 33 F, 25 V Curve 5: 47 F, 25 V Curve 6: 68 F, 16 V 1 2 3 4 5 6 102 10 1 1 10-1 Case O D x L = 6.7 x 20.4 mm UR = 6.3 to 16 V 10 10 2 3 10 10-1 10 4 10 5 6 7 10 f (Hz) 10 Case O D x L = 6.7 x 20.4 mm; UR = 16 to 40 V 10 102 103 104 105 Tamb = 25 C Fig. 12 - Typical impedance as a function of frequency 103 102 Curve 1: 150V, 10 V Curve 2: 220 V, 10V Curve 3: 330 V, 6.3 V Z () 10 1 2 3 4 5 6 10 1 -1 Curve 1: 22 F, 40 V Curve 2: 33 F, 35 and 40 V Curve 3: 47 F, 35 V Curve 4: 68 F, 25 V Curve 5: 100 F, 16 and 25 V Curve 6: 150 F, 16 V Z () 102 1 2 3 1 10 -2 106 f (Hz) 107 Tamb = 25 C Fig. 11 - Typical impedance as a function of frequency 10 106 f (Hz) 107 Case O D x L = 9.4 x 23.3 mm; UR = 6.3 to 10 V 10 102 103 104 105 10-1 106 f (Hz) 107 Tamb = 25 C Fig. 13 - Typical impedance as a function of frequency Revision: 05-May-13 Case O D x L = 9.4 x 23.3 mm; UR = 16 to 40 V 10 102 103 104 105 106 f (Hz) 107 Tamb = 25 C Fig. 14 - Typical impedance as a function of frequency Document Number: 28355 7 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com Vishay BCcomponents IMPEDANCE (Z) 102 103 Curve 1: 220 F, 16 V Curve 2: 330 F, 16 V Curve 3: 330 F, 10 V Curve 4: 470 F, 10 V Curve 5: 680 F, 6.3 V Z () 1 2 3 4 5 10 1 Curve 1: 47 V, 40 V Curve 2: 68 V, 35 and 40 V Curve 3: 150 V, 25 V Z () 102 1 2 3 10 -1 1 10 10-2 Case O D x L = 10.3 x 32.0 mm; UR = 6.3 to 16 V 102 10 103 104 105 10-1 106 f (Hz) 107 Case O D x L = 10.3 x 32.0 mm; UR = 25 to 40 V 102 10 103 104 105 106 f (Hz) 107 Tamb = 25 C Tamb = 25 C Fig. 15 - Typical impedance as a function of frequency Fig. 16 - Typical impedance as a function of frequency 102 102 Curve 1: 680 F, 10 V Curve 2: 1000 F, 6.3 V Curve 3: 1500 F, 6.3 V Z () 10 Z () 1 1 10-1 10-1 10-2 Case O D x L = 12.9 x 32.0 mm; UR = 6.3 to 10 V 10 2 1 2 3 4 5 6 10 1 2 3 10 4 103 10-2 Case O D x L = 12.9 x 32.0 mm; UR = 10 to 40V 10 2 10 6 f (Hz) 10 7 Tamb = 25 C 10 5 Curve 1: 100 F, 35 and 40 V Curve 2: 150 F, 35 V Curve 3: 220 F, 25 V Curve 4: 470 F, 16 V Curve 5: 680 F, 16 V Curve 6: 1000 F, 10 V 10 4 103 10 6 f (Hz) 10 7 10 5 Tamb = 25 C Fig. 17 - Typical impedance as a function of frequency Fig. 18 - Typical impedance as a function of frequency EQUIVALENT SERIES RESISTANCE (ESR) Typical ESR: see Figures 20 to 28; the standard deviation is 20 % of each value. 102 102 Case O D x L = 6.7 x 15.3 mm ESR at 100 Hz ESR () 10 1 Case O D x L = 7.6 x 20.4 mm ESR at 100 Hz ESR () 10 1 3 2 1 10-1 4 5 Curve 1: 10 mF, 25 V; 6.8 mF, 35 and 40 V Curve 2: 10 mF, 16 V Curve 3: 22 mF, 16 V Curve 4: 33 mF, 10 V Curve 5: 47 mF, 6.3 and 10 V; 68 mF, 6.3 V - 80 - 40 0 40 80 1 10-1 120 160 200 Tamb (C) Fig. 19 - Typical ESR as a function of ambient temperature Revision: 05-May-13 2 3 4 5 Curve 1: 10 F, 35 and 40 V Curve 2: 33 F, 25 V Curve 3: 47 F, 25 V Curve 4: 68 F, 10 V; 150 F, 6.3 V - 80 - 40 0 40 80 120 160 200 Tamb (C) Fig. 20 - Typical ESR as a function of ambient temperature Document Number: 28355 8 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com Vishay BCcomponents EQUIVALENT SERIES RESISTANCE (ESR) 102 102 Curve 1: 33 F, 35 and 40 V Curve 2: 220 F, 10 V; 330 F, 6.3 V ESR () Case O D x L = 10.3 x 32.0 mm ESR at 100 Hz ESR () Curve 1: 68 F, 35 and 40 V Curve 2: 150 F, 25 V Curve 3: 330 F, 10 V Curve 4: 470 F, 10 V 10 10 1 1 1 1 2 2 Case O D x L = 9.4 x 23.3 mm 10-1 - 40 - 80 0 40 ESR at 100 Hz 80 120 160 102 ESR () 10 Curve 1: 100 F, 35 and 40 V Curve 2: 150 F, 35 V Curve 3: 220 F, 25 V Curve 4: 470 F, 16 V Curve 5: 680 F, 10 V; 1000 F, 6.3 V - 40 - 80 200 Tamb (C) Fig. 21 - Typical ESR as a function of ambient temperature Case O D x L = 12.9 x 32.0 mm ESR at 100 Hz 3 4 10-1 0 40 80 120 160 200 Tamb (C) Fig. 22 - Typical ESR as a function of ambient temperature 103 ESR () Curve 1: 10 F, 25 V; 6.8 F, 35 and 40 V Curve 2: 10 F, 16 V Curve 3: 22 F, 16 V Curve 4: 33 F, 10 V Curve 5: 47 F, 6.3 and 10 V; 68 F, 6.3 V 1 2 3 102 4 5 10 1 10-1 - 40 - 80 0 40 80 120 160 1 2 3 4 1 5 10-1 Case O D x L = 6.7 x 15.3 mm 1 200 Tamb (C) Fig. 23 - Typical ESR as a function of ambient temperature 10 10 2 10 3 10 4 10 5 10 6 f (Hz) Tamb = 25 C Fig. 25 - Typical ESR as a function of frequency 102 103 ESR () Curve 1: 10 F, 35 and 40 V Curve 2: 33 F, 25 V Curve 3: 47 F, 25 V Curve 4: 68 F, 10 V; 150 F, 6.3 V Curve 5: 100 F, 10 V 1 102 2 3 4 5 10 Curve 1: 33 F, 35 and 40 V Curve 2: 220 F, 10 V; 330 F, 6.3 V ESR () 10 1 1 1 2 10-1 Case O D x L = 6.7 x 20.4 mm 10-1 1 10 10 2 10 3 10 4 10 5 10 6 f (Hz) Tamb = 25 C Fig. 24 - Typical ESR as a function of frequency Revision: 05-May-13 Case O D x L = 9.4 x 23.3 mm 10-2 1 10 10 2 10 3 10 4 10 5 10 6 f (Hz) Tamb = 25 C Fig. 26 - Typical ESR as a function of frequency Document Number: 28355 9 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com Vishay BCcomponents EQUIVALENT SERIES RESISTANCE (ESR) 102 102 ESR () Curve 1: 68 F, 35 and 40 V Curve 2: 150 F, 25 V Curve 3: 330 F, 10 V Curve 4: 470 F, 10 V 1 10 2 ESR () 10 1 2 3 4 1 5 Curve 1: 100 F, 35 and 40 V Curve 2: 150 F, 35 V Curve 3: 220 F, 25 V Curve 4: 470 F, 16 V Curve 5: 680 F, 10 V; 1000 F, 6.3 V 3 4 1 10-1 10-1 Case O D x L = 9.4 x 23.3 mm 10-2 1 10 2 10 10 3 ESR at 100 Hz 10 4 10 5 10 6 f (Hz) Fig. 27 - Typical ESR as a function of ambient temperature ESR at 100 Hz Case O D x L = 9.4 x 23.3 mm 10-2 1 10 10 2 10 3 10 4 10 5 10 6 f (Hz) Fig. 28 - Typical ESR as a function of ambient temperature Table 3 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) Endurance IEC 60384-4/ EN130300 subclause 4.13 Tamb = 125 C; UR = 6.3 V to 25 V with UR applied; UR = 35 V and 40 V with UC applied; 10 000 h Useful life CECC 30302 subclause 1.8.1 Tamb = 125 C; IR applied and UR = 6.3 V to 25 V with UR applied; UR = 35 V and 40 V with UC applied; 20 000 h Shelf life (storage at high temperature) IEC 60384-4/ EN130300 subclause 4.17 Tamb = 125 C; no voltage applied; 500 h Charge and discharge IEC 60384-4-2 subclause 9.21 106 cycles without series resistance: 0.5 s to UR; 0.5 s to ground Shock IEC 60068-2-27 test Ea Half-sine or saw tooth pulse shape; 50 g; 11 ms; 3 successive shocks in each direction of 3 mutually perpendicular axes; no voltage applied Severe rapid change of temperature Solvent resistance Passive flammability Revision: 05-May-13 100 cycles of 1 h duration, each with 30 min at - 40 C and + 125 C REQUIREMENTS C/C: 10 % tan 1.2 x spec. limit Z 1.2 x spec. limit IL5 spec. limit C/C: 15 % tan 1.5 x spec. limit Z 1.5 x spec. limit IL5 spec. limit no short or open circuit, no visible damage total failure percentage: < 1 % C/C: 10 % tan 1.2 x spec. limit IL5 1 x spec. limit C/C: 5 % no short or open circuit, no visible damage no intermittent contacts no breakdown no open circuiting no mechanical damage C/C: 5 % tan 1.2 x spec. limit Z 1.2 x spec. limit IL5 1.5 x spec. limit C/C: 25 % tan 1.5 x spec. limit Z 2.0 x spec. limit IL5 1 x spec.limit IEC 60068-2-45, test XA IEC 60653 Immersion: 5 min 0.5 min with or without ultrasonic at 55 C 5 C Solvents: demineralized water and/or calgonite solution (20 g/l) Visual appearance not affected IEC 60695-2-2 Capacitor mounted to a vertical printed-circuit board, one flame on capacitor body; Tamb = 20 C to 25 C; test duration = 20 s After removing the test flame from the capacitor, the capacitor must not continue to burn for more than 15 s; no burning particles must drop from the sample Document Number: 28355 10 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 123 SAL-A www.vishay.com Vishay BCcomponents ADDITIONAL TESTS AND REQUIREMENTS FOR EPOXY-FILLED VERSIONS SAL-AG 2281 123 8.... Form BA 10 %, level S, lead (Pb)-free 2222 123 8.... Form BA 10 %, level S, non lead (Pb)-free Table 4 TEST PROCEDURES AND REQUIREMENTS TEST PROCEDURE REQUIREMENTS Severe vibration tests in accordance with "IEC 60068-2-6" and "MIL STD-202", method 204, letter E, with the following details and additions Method of mounting: Clamping both body and leads Severity 1 Frequency range temperature 10 Hz to 3000 Hz; 20 C to 25 C Severity 2 Frequency range temperature 50 Hz to 2000 Hz; 125 C Severity 1 and 2 vibration amplitude: 50 g or 3.5 mm, whichever is less Direction and duration of motion: Severity 1 1 octave/min; 3 directions (mutually perpendicular); 20 sweeps per direction (total 60 sweeps or 18 h) Severity 2 1 octave/min; 2 directions (longitudinal and transversal); 3 sweeps per direction (total 6 sweeps or 1 h) Functioning: Severity 1 C/C: 10 % tan 1.2 x stated limit Z 1.4 x stated limit DC leakage current: stated limit no intermittent contacts no indication of breakdown no open circuiting no evidence of mechanical damage Rated voltage applied Severity 2 No voltage applied Typical capability > 80 g at 10 Hz to 3000 Hz (also at 125 C) Severe shock tests in accordance with "IEC 60068-2-27" and "MIL STD-202", method 213, letter F, with the following details and additions Method of mounting Clamping both body and leads Pulse shape: Half-sine or sawtooth Severity 1 1500 g; 0.5 ms ("MIL STD-202", method 213, letter F) Severity 2 3000 g; 0.2 ms Severity 3 10 000 g; 0.1 ms Direction and number of shocks: Severity 1 and 2 3 successive shocks in each direction of 3 mutually perpendicular axes (total 18 shocks) Severity 3 1 shock in any direction Functioning Rated voltage applied Revision: 05-May-13 C/C: 10 % tan 1.2 x stated limit Z 1.4 x stated limit DC leakage current: stated limit no intermittent contacts no indication of breakdown no open circuiting no evidence of mechanical damage Document Number: 28355 11 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000