Surface mount type TPU RoHS compliance Series Small size Low profile Face down terminal type TPU series has a real advantage in size-sensitive applications using a face down terminal structure. TPU TPC Small size Low profile Specifications Items Condition Rated voltage (V) (V) Surge voltage Category temperature range () Capacitance tolerance () Rated capacitance range (F) Dissipation Factor (DF) Leakage current Equivalent series resistance (ESR) - - - 120Hz/20 120Hz/20 120Hz/20 Rated voltage applied, after 5 minutes 100kHz/20 -55 Z/Z20 100kHz/20 85 Z/Z20 C/C 85, 1,000h, DF rated voltage applied LC C/C 60, 90 to 95%RH, 500h, DF No-applied voltage LC C/C 85, 1,000 cycles, DF 1k discharge resistance, surge voltage applied LC Characteristics of impedance ratio at high temp. and low temp. Endurance Damp heat (Steady State) Surge Specifications 2.5 2.9 4.0 6.3 10 4.6 7.2 12 -55 to 85 M : 20 4.7 to 150 Please see the attached characteristics list Please see the attached characteristics list Please see the attached characteristics list 0.6 to 2.0 0.6 to 2.0 Within20% of the initial value < 1.5 times of the initial limit Within the initial limit Within40%,-20% of the initial value < 1.5 times of the initial limit < 3 times of the initial limit Within5% of the initial value Within the initial limit < 3 times of the initial limit T P U POSCAP Line-up (unit: mm) L 0.11 W 0.11 H 0.1 S 0.11 W1 0.1 S09 S11 A09 B09 2.0 2.0 3.2 3.5 1.25 1.25 1.6 2.8 0.9 1.1 0.9 0.9 0.5 0.5 0.8 0.8 0.9 0.9 1.2 2.2 L W 1 0.2:A09,B09 Size list F 4.7 10 15 22 33 47 68 100 150 H W1 S 2.5 4.0 6.3 10 S09 S09 S09 S11 A09 B09 Part number 10TPU4R7MSI 6TPU22MSI 6TPU10MSI 4TPU33MSI 4TPU15MSI 2R5TPU47MSI 2R5TPU22MSI 6TPU33MSK 4TPU47MSK 2R5TPU68MSK 10TPU33MAI 6TPU47MAI 4TPU68MAI 2R5TPU100MAI 6TPU150MBI2 S09 S11 A09 S09 S11 A09 A09 B09 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 4.7 22 10 33 15 47 22 33 47 68 33 47 68 100 150 Products list Explanation of part numbers Packing specifications Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics Reliability Maximum allowable MSL Rated Rated Rated Category Category LC ESR DF Reflow Reflow voltage temperature capacitance voltage temperature A mmax ripple current mArms max temp. (V) () F V max/5min. 100kHz/20 100kHz1 <temp. 260 < 250 10 6.3 6.3 4.0 4.0 2.5 2.5 6.3 4.0 2.5 10 6.3 4.0 2.5 6.3 Image of case size Marking S09 S11 A09 TPU series characteristics list Size code Series system diagram S09 S09 10 6.3 6.3 4.0 4.0 2.5 2.5 6.3 4.0 2.5 10 6.3 4.0 2.5 6.3 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 Please refer to page 65 for the compensation coefficient of maximum allowable ripple current. 4.7 27.7 6.3 26.4 6.0 23.5 5.5 41.6 37.6 34.0 33.0 29.6 27.2 25.0 94.5 300 150 250 150 250 150 250 150 150 150 150 150 150 150 100 360 510 400 510 400 510 400 510 510 510 510 510 510 510 670 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 100k to 500kHz,45 2 Under development Tantalum Solid Capacitors with Conductive Polymer S RV RV : Rated voltage Guidelines and precautions for use Selection guide Size code Technical data Dimensions TPSF TPU TPLTPLF TPF TPG TPE TPB TPC TPD TA TH TQC 87