Manufacturer of Passive Components
800-684-5322 Inside US 949-453-1811 Outside US
Copyright © 2010 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
REV 10.29.10
Power Inductors - Shielded www.ctparts.com
CTCDEP147LF
Series
From 0.5 µH to 12 µH
SPECIFICATIONS
Part numbers indicate inductance tolerance available.
N = ±30%, M = ±20%
L Test DCR Saturation Temp.
Part Inductance Freq. Max. Current Current
Number (µH) (KHz) (mW) (A) (A)
CTCDEP147LF-R50N 0.5 100 2.10 39.6 24.0
CTCDEP147LF-1R1M 1.1 100 2.65 26.4 22.0
CTCDEP147LF-2R0M 2.0 100 3.50 19.6 19.5
CTCDEP147LF-3R1M 3.1 100 3.90 16.0 16.2
CTCDEP147LF-4R5M 4.5 100 5.50 13.6 14.0
CTCDEP147LF-6R1M 6.1 100 7.50 11.6 13.5
CTCDEP147LF-8R0M 8.0 100 7.80 10.0 11.5
CTCDEP147LF-100M 10 100 9.85 9.2 10.2
CTCDEP147LF-120M 12 100 13.3 8.0 9.00
Not Shown at Actual Size
CHARACTERISTICS
PHYSICAL DIMENSIONS
PAD LAYOUT
Description: SMD Power Inductor.
Applications: LCD television set, notebook PC, portable
communication equipment, DC/DC converters, etc.
Operating Temperature: -30°C to +100°C (includes temp. when
coil is heated)
Saturation Current: This indicates the value of current when the
inductance is 25% lower than its initial value at D.C. superposition
or D.C. current.
Temperature Current: To load current onto the components
under normal ambience, which causes the temp. change as
DT=40°C or more lower current.
Inductance Tolerance: M = ±20%, N = ±30%
Testing: Inductance is tested on an HP4285A at 100KHz, 0.25V.
Packaging: Tape & Reel.
Marking: Parts are marked with inductance code.
Miscellaneous: RoHS Compliant.
Additional Information: Additional electrical & physical
information available upon request.
Samples available. See website for ordering information.
BC
AF
G
D
D
E
xxx
Marking
(Inductance
Schematic (Bottom)
Code) 2
1
3
12.0
6.0
15.5
10.2
3.0
A B C D E F G
Max. Max. Max. Typ. Typ. Typ. Typ.
14.9 15.0 8.1 2.8 10.5 2.3 9.0
0.58 0.59 0.32 0.11 0.41 0.09 0.35
Size
mm
inches
Unit: mm
