- 528 -
AC
.442(11.23)
.432(10.97)
.25(6.35)
.22(5.59)
.20(5.08)
HOLEFOR#10SCREW
DIA
.692(17.6)
.612(15.5)
1.14(29.0)
1.12(28.5)
1.14(29.0)
1.12(28.5)
.692(17.6)
.612(15.5)
.602(15.3)
.522(13.3)
.752(19.1)
.672(17.1)
.96(24.5)
.85(21.5)
.490(12.4)
.410(10.4)
.442(11.23)
.432(10.97)
.042(1.07)
.038(0.97)
.22(5.59)
.20(5.08)
HOLEFOR#10SCREW
DIA
1.14(29.0)
1.12(28.5)
.752(19.1)
.672(17.1)
.752(19.1)
.672(17.1)
1.14(29.0)
1.12(28.5)
1.2(30.5)
MIN.
REV.1 Oct.-2003
.692(17.6)
.612(15.5)
.034(0.86)
.030(0.76)
0.442(11.23)
0.432(10.97)
.26(6.60)
.22(5.59)
.20(5.08)
HOLEFOR#10SCREW
DIA .692(17.6)
.612(15.5)
.692(17.6)
.612(15.5) .692(17.6)
.612(15.5)
1.14(29.0)
1.12(28.5)
1.14(29.0)
1.12(28.5)
0.967(24.57)
0.837(21.26)
GBPC 15, 25, 35 SERIES
High Current 15, 25, 35 AMPS. Single Phase Glass Passivated Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
15.0/25.0/35.0 Amperes
F
eatures
UL Recognized file # E-96005
The plastic material used carries Underw
riters
Laboratory Flammability Recognition 94V-0
Integrally molded heatsink provide very low
thermal resistance for maximum heat
dissipation
Surge overload ratings from 300 amperes to
400 amperes
Terminals solderable per MIL-STD-202,
Method 208 (For wire type)
Typical IRless than 0.2 uA
High temperature soldering guaranteed:
260/ 10 seconds / .375”, (9.5mm) lead
lengths(For wire type)
Isolated voltage from case to lead over 2500
volts
GBPC GBPC-W
GBPC-M
Dimensions in inches and (millimeters)
M
aximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol -005 -01 -02 -04 -06 -08 -10 Unit
s
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward GBPC15
Rectified Current GBPC25
@TC=55GBPC35 I(AV) 15.0
25.0
35.0 A
Peak Forward Surge Current, GBPC15
Single Sine-wave Superimposed GBPC25
on Rated Load (JEDEC method ) GBPC35 IFSM 300
300
400 A
Maximum Instantaneous GBPC15 7.5A
Forward Voltage Drop Per GBPC25 12.5A
Element at Specified Current GBPC35 17.5A VF1.1 V
Maximum DC Reverse Current
at Rated DC Blocking Voltage Per Element IR5uA
Typical Thermal Resistance (Note 1) RθJC 1.5 /W
Operating and Storage Temperature Range TJ,TSTG -50to+150
Notes: 1. Thermal Resistance from Junction to Case.
2. Suffix “W” - Wire Lead Structure/”M” - Terminal Location Face to Face.
- 529-
RATINGS AND CHARACTERISTIC CURVES (GBPC25005 THRU GBPC2510)
GBPC35005
GBPC15005
GBPC3510
GBPC1510
FIG.1- MAXIMUM FORWARD CURRENT
DERATING CURVE
AVERAGE FORWARD CURRENT. (A)
160 180
20 40 60 80 100 120 140
0
5
10
15
20
25
40
35
30
CASE TEMPERATURE. ( C)
o
GBPC35
GBPC25
GBPC15
FIG.2- MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT PER BRIDGE ELEMENT
PEAK FORWARD SURGE CURRENT. (A)
12341.5 5 6 98710 252015 30 1006040 80
20
100
300
400
200
NUMBER OF CYCLES AT 60Hz
GBPC35
GBPC25
GBPC15
FIG.4- TYPICAL FORWARD CHARACTERISTICS
PER BRIDGE ELEMENT
INSTANTANEOUS FORWARD CURRENT. (A)
.6 .8 1.0 1.2 1.4 1.6 1.8 2.0
0.1
1
10
100
1000
FORWARD VOLTAGE. (V)
GBPC35
GBPC25
GBPC15
FIG.3- TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
INSTANTANEOUS REVERSE CURRENT.( A)
020 40 60 80 100 120 140
.10
1.0
10
100
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
Tj=25 C
0
Tj=125 C
0