ALUMINUM ELECTROLYTIC CAPACITORS CZ Chip Type, High Reliability. Low temperature ESR specification. series Chip type, high temperature range, for +125C use. Added ESR specification after the test at -40C. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). CX High Temperature CZ Low ESR Long Life CJ Specifications Item Performance Characteristics Category Temperature Range -40 to +125C Rated Voltage Range 10 to 100V Rated Capacitance Range 10 to 3300F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3A, whichever is greater. Measurement frequency : 120Hz at 20C Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) 10 0.30 16 0.23 25 0.18 35 0.16 50 0.16 63 0.12 80 0.12 100 0.10 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Stability at Low Temperature Rated voltage (V) 10 16 25 35 50 63 80 100 Impedance ratio Z-40C / Z+20C ZT / Z20 (MAX.) 12 8 6 4 4 3 3 3 Measurement frequency : 120Hz After continuous application of rated voltage at 125C and then restoring down to 20C, the readings of measurements shall meet below. Case size Endurance time Capacitance change tan Leakage current Endurance 6.3 x 5.8L 1000hrs. 6.3 x 7.7L 2000hrs. 8 to 12.5 3000hrs. 16,18 x 16.5L 16,18 x 21.5L 3500hrs. 4000hrs. Within 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 125C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, Within 10% of the initial capacitance value Capacitance change which is maintained at 250C. The capacitors shall meet Less than or equal to the initial specified value tan the characteristic requirements listed at right when they Less than or equal to the initial specified value Leakage current are removed from the plate and restored to 20C. Shelf Life Resistance to soldering heat Black print on the case top. 6.3 x 5.8L : The vibration structure-resistant product can t support. 6.3 x 7.7L : The vibration structure-resistant product is available. Voltage C0.2 B0.2 D0.5 Series L1.0 H 4 5 6 7 8 0.5MAX. 9 10 11 12 13 14 Package code Rated voltage (35V) Series name Type ( 8 to 10) Vibration Resistance A0.2 A0.2 Negative Negative Lot No. Plastic platform 0.3 MAX. L1.0 Capacitance DxL Code GS MS ZD Code CL CS NQ H Aid electrode (mm) Vibration Resistance (mm) Standard 6.3x5.8 2.4 A 6.6 B 6.6 C 2.2 E 5.8 L H 0.5 to 0.8 C0.2 E Series B0.2 0.5MAX. Voltage (V : 35V ) Trade mark Size Package Taping 4 to 10 12.5 to 18 Taping Tray 12.5 to 18 d Configuration 6.3 to 10 Standard Vibration Resistance 12.5 or more Standard A0.2 A0.2 Rated capacitance (47F) 0.5 MAX. Capacitance tolerance (20%) A0.2 A0.2 E Plastic platform Lot No. Positive Positive 0.3 MAX. Pressure relief vent Capacitance H 3 Negative E Standard 680 F CZ 35V H1015 nichicon Trade mark C0.2 2 Size code A0.2 A0.2 D0.5 A2 220V CZ (12.5 to 18) Plastic platform 0.3MAX. L0.5 Capacitance Lot No. H 1 UC Z 1 V 4 7 0 MC L 1 GS Configuration E Series Trade mark B0.2 D0.5 A2 47V CZ ( 8 to 10) Standard Voltage (V : 35V ) C0.2 L 0.3 Capacitance Lot No. Positive Plastic platform 0.3MAX. Series B0.2 Voltage (C:35V) 0.5 MAX. ( 6.3) Standard Type system (Example : 35V: 35V 47F) Typenumbering numbering system (Example 47F) D0.5 Chip Type a2 220V CZ Marking 6.3x7.7 8x10 10x10 12.5x13.5 16x16.5 2.9 3.2 2.4 4.8 5.4 8.3 10.3 13.6 17.1 6.6 8.3 10.3 13.6 17.1 6.6 3.1 4.5 4 6.3 2.2 10 10 13.5 16.5 7.7 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 1.0 to 1.4 1.0 to 1.4 Rated Voltage V 10 16 Code A C 25 E 35 V 50 H 16x21.5 18x16.5 5.4 6.4 17.1 19.1 17.1 19.1 6.3 6.3 21.5 16.5 1.0 to 1.4 1.0 to 1.4 63 J 80 K 18x21.5 6.4 19.1 19.1 6.3 21.5 1.0 to 1.4 DxL 8x10 2.9 A 8.3 B 8.3 C 3.1 E 10 L H 1.1 to 1.5 10x10 3.2 10.3 10.3 4.5 10 1.1 to 1.5 100 2A 12.5 to 18 : The vibration structure-resistant product is also available upon request, please ask for details. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS CZ series Dimensions Cap. (F) V 10 16 25 35 50 Code 1A 1C 1E 1V 1H 10 100 6.3 x 5.8 1.60 24 - 69 6.3 x 5.8 2.80 42 - 22 220 6.3 x 5.8 1.60 24 - 69 6.3 x 7.7 0.50 5 40 197 33 330 6.3 x 7.7 0.45 5 40 197 6.3 x 7.7 0.50 5 40 197 6.3 x 7.7 0.45 5 8 x 10 0.20 8 x 10 0.20 8 x 10 10 x 10 6.3 x 5.8 6.3 x 5.8 1.60 24 47 470 68 680 100 101 Recommend 16V 220 221 8 x 10 0.20 3 4.5 270 330 331 390 391 470 471 560 8 x 10 0.20 3 4.5 270 10 x 10 0.15 2 3.5 500 10 x 10 0.15 2 3.5 500 - 69 1.60 24 - 69 Recommend 35V 6.3 x 7.7 0.45 5 40 197 6.3 x 7.7 0.45 5 40 197 8 x 10 0.20 3 4.5 270 8 x 10 0.20 3 4.5 270 8 x 10 0.20 3 4.5 270 8 x 10 0.20 3 4.5 270 10 x 10 0.15 2 3.5 500 10 x 10 0.15 2 3.5 500 10 x 10 0.15 2 3.5 500 10 x 10 0.15 2 3.5 500 51 0.25 3.5 6 40 197 6.3 x 7.7 0.50 40 197 3 4.5 270 0.25 3.5 3 4.5 270 0.20 3 4.5 270 0.15 2 3.5 500 8 x 10 8 x 10 5 6 270 270 0.20 2.5 4.5 500 10 x 10 12.5 x 13.5 0.100 0.44 4.0 1300 12.5 x 13.5 0.060 0.40 3.0 1700 16 x 16.5 0.080 0.34 2.6 2000 561 12.5 x 13.5 0.060 0.40 3.0 1700 16 x 16.5 0.080 0.34 2.6 2000 680 681 12.5 x 13.5 0.060 0.40 3.0 1700 18 x 16.5 0.078 0.32 2.6 2100 820 821 12.5 x 13.5 0.060 0.40 3.0 1700 16 x 16.5 0.047 0.28 1.4 2400 18 x 16.5 0.078 0.32 2.6 2100 1000 102 12.5 x 13.5 0.060 0.40 3.0 1700 16 x 16.5 0.047 0.28 1.4 2400 16 x 21.5 0.040 0.22 1.5 2800 1200 122 16 x 16.5 0.047 0.28 1.4 1700 18 x 16.5 0.045 0.28 1.4 2600 18 x 21.5 0.038 0.20 1.5 2900 1400 142 1600 162 16 x 16.5 0.047 0.28 1.4 2400 16 x 21.5 0.034 0.20 0.6 3000 2200 222 18 x 16.5 0.045 0.23 1.3 2600 18 x 21.5 0.032 0.16 0.5 3250 2700 272 16 x 21.5 0.034 0.20 0.6 3000 3300 332 18 x 21.5 0.032 0.16 0.5 3250 Cap. (F) 10 18 x 16.5 0.045 0.28 1.4 2600 V 63 80 Code 1J 1K 100 22 220 33 330 47 470 82 820 6.3 x 7.7 2.00 100 - 60 after Initial Initial endurance 20 C -40C test Rated -40C ripple Case size D x L (mm) ESR 100 2A 8 x 10 0.75 50 - 70 8 x 10 0.75 50 - 70 8 x 10 0.75 50 - 70 8 x 10 0.75 50 - 70 10 x 10 0.55 35 - 115 10 x 10 0.55 35 - 115 8 x 10 0.70 35 - 100 10 x 10 0.55 35 - 115 8 x 10 0.70 35 - 100 8 x 10 0.75 50 - 10 x 10 0.50 25 - 170 10 x 10 0.55 35 - 115 8 x 10 0.70 35 - 100 10 x 10 0.50 25 - 170 10 x 10 0.55 35 - 115 70 Guaranteed time of ESR after endurance test 12.5x13.5 0.28 1.9 22 700 150 151 12.5 x 13.5 0.20 1.3 14 1000 12.5 x 13.5 0.28 1.9 14 700 16x16.5 0.19 1.4 4.8 1000 Size 180 181 12.5 x 13.5 0.20 1.3 14 1000 18x16.5 0.17 1.1 3.9 1100 6.3 x 5.8L - 220 221 12.5 x 13.5 0.20 1.3 14 1000 16x21.5 0.12 0.8 2.6 1600 10 to 50V 2000hrs. 270 271 6.3 x 7.7L, 8 x 10L 10 x 10L 300 301 18x21.5 0.11 0.7 2.4 1700 16,18 x 16.5L 2000hrs. 330 331 16,18 x 21.5L 3000hrs. 390 391 16 x 16.5 0.13 0.9 4.8 1900 470 471 18 x 16.5 0.11 0.82 3.9 2000 520 521 560 561 16 x 21.5 0.07 0.46 2.0 2500 750 751 18 x 21.5 0.068 0.44 1.8 2600 16 x 16.5 0.19 1.4 4.8 1000 18 x 16.5 0.17 1.1 3.9 1100 16 x 21.5 0.12 0.8 2.6 1600 18 x 21.5 0.11 0.7 2.4 1700 Case size D x L (mm) after Initial Initial endurance 20 C -40C test Rated -40C ripple ESR Guaranteed time 63 to 100V - Max. ESR () at 20C / -40C 100kHz, Rated ripple Current (mArms) at 125C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current 0 Frequency0/ Coefficient 50Hz 0.35 120Hz 0.50 300Hz 0.64 1kHz 0.83 10kHz or more 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UCZ1A221MCL1GS UCZ1A331MCL1GS UCZ1A331MCL6GS UCZ1A471MCL1GS UCZ1C101MCL1GS UCZ1C101MCL6GS UCZ1C221MCL1GS UCZ1C331MCL1GS UCZ1C471MCL1GS UCZ1E101MCL1GS UCZ1E221MCL1GS UCZ1E331MCL1GS UCZ1V101MCL1GS UCZ1V221MCL1GS UCZ1V470MCL1GS UCZ1V470MCL6GS UCZ1V680MCL1GS UCZ2A220MCS6GS UCZ1A471MCS1GS UCZ1E221MCS6GS UCZ1E101MCS6GS UCZ1A221MCS1GS UCZ1H470MCS1GS UCZ1J470MCS6GS UCZ1H330MCS6GS UCZ1V220MCL1GS UCZ1K220MCL1GS UCZ1V100MCL1GS UCZ2A100MCS1GS UCZ1K470MCS1GS UCZ1J470MCS1GS UCZ2A220MCS1GS UCZ1V101MCS1GS UCZ1J330MCS6GS UCZ1H220MCS1GS UCZ1H330MCS1GS UCZ1C331MCS1GS UCZ1H101MCS1GS UCZ1H330MCL1GS UCZ1C471MCS1GS UCZ1K330MCS6GS UCZ1J470MCL1GS UCZ1J330MCL6GS UCZ2A220MCL1GS UCZ1V680MCS1GS UCZ1K100MCS1GS UCZ1K220MCS1GS UCZ1J100MCL1GS UCZ2A330MCS1GS UCZ1V221MCS1GS UCZ1E101MCS1GS UCZ1A331MCS6GS UCZ1H470MCL6GS UCZ1C101MCS6GS UCZ1E221MCS1GS UCZ1E330MCL1GS UCZ1C101MCS1GS UCZ1J220MCL1GS UCZ1H100MCL1GS UCZ1H470MCS6GS UCZ1K330MCL1GS UCZ1V330MCS1GS UCZ1K220MCL6GS UCZ1K330MCS1GS UCZ1V470MCS6GS UCZ1V330MCL1GS UCZ1C221MCS1GS UCZ1H101MCL1GS UCZ1E331MCS1GS UCZ1K220MCS6GS UCZ1J100MCS1GS UCZ1J330MCL1GS UCZ1J220MCS1GS UCZ1H220MCL1GS UCZ1V470MCS1GS UCZ1K330MCL6GS UCZ1J330MCS1GS UCZ2A100MCL1GS UCZ1C470MCL1GS UCZ1H330MCL6GS UCZ1A331MCS1GS UCZ1E221MCL6GS UCZ1K100MCL1GS UCZ1K470MCL1GS UCZ1J470MCL6GS UCZ1H470MCL1GS UCZ2A330MCL1GS UCZ2A220MCL6GS UCZ1E101MCL6GS UCZ1J471MNQ1MS UCZ1H821MNQ1MS UCZ1K521MNQ1MS UCZ1E821MNQ1MS UCZ1E222MNQ1MS UCZ1K331MNQ1MS UCZ1J181MNQ1MS UCZ1V681MNQ1MS UCZ1V122MNQ1MS UCZ1V222MNQ1MS UCZ1V471MNQ1MS