ENCLOSuRE shielding SOLUTIONS
2
Consider these important
factors in the selection
of appropriate shielding
products for your design:
SHIELDING SELECTION CONSIDERATIONS
Notice:
Leader Tech cannot guarantee that the same test data as described herein will be obtained. Thus, it is recommended that each user make their own tests
to confirm laboratory test data and determine suitability of products for their particular application.
The products described in this catalog shall be standard quality, however, the products in this catalog are sold without warranty of fitness for a particular
purpose, either expressed or implied, except to the extent expressly stated on Leader Tech's quotation or order acknowledgment. Leader Tech does
not warrant that devices incorporating one or more of the products described in this catalog will be free of conflict with existing or future patents of third
parties. All risks of lack of fitness, patent infringement, and the like are assumed by the user. Furthermore, nothing contained herein shall be construed as a
recommendation to make, use, or sell any product or process in conflict with existing or future patents.
n Operating Frequency
n Materials Compatibility
n Load/Forces
n Corrosive Considerations
n Commercial or Military
Worldwide Compliance
n Operating Environment
QUICK REFERENCE PRODUCT SELECTION CHART
PARAMETERS TechSIL
ELASTOMER SHEETS TechSIL
ELASTOMER GASKETS CuBe
METAL GASKETS FSG
FABRIC SHIELDING GASKETS CFS
CONDUCTIVE FOAM TechMESH
KNITTED WIRE TechMESH
COMBO STRIP
High Cycling
Good Good Excellent Very Good Fair Good Good
Wiping Applications
N/A Good Excellent Good N/A Fair Fair
Dust Protection
Excellent Excellent N/A Very Good Very Good Fair Excellent
Moisture Protection
Excellent Excellent N/A N/A N/A N/A Excellent
Deflection %
10-20% 15-50% 15-85% 30-50% 30-60% 20-50% 20-50%
Design Flexibility
Excellent Excellent Very Good Excellent Excellent Good Very Good
Finish Options
Very Good Very Good Excellent Good Fair Good Good
I/O Applications
Excellent Fair Fair Very Good Excellent Fair Fair
Shield Effectiveness
Excellent Excellent Excellent Excellent Very Good Excellent Excellent
Tooling/NRE
Low None None None/Low Low None Low
Part Cost
$$$ $$$ $$$ $ $$ $ $$
Lead Times
Very Good Very Good Excellent Excellent Very Good Very Good Good
n Cycle Life
n Cost
n Material Thickness/Alloy
n Attenuation Performance
n Fastening/Mounting
Methods
n Storage Environment
n Nuclear, Biological,
Chemical (NBC)
n Shielding/Grounding/Other
n Electrical Requirements
n Space/Weight Considerations
n Product Safety
n Recyclability
EMI Enclosure Shielding Solutions 3
TABLE OF CONTENTS
Application of Fingerstock Gaskets
Compression/Deflection Performance and EMI Shielding Effectiveness
Ordering Information & Adhesive Mounting Instructions
Metals Galvanic Compatibility Chart
BeCu Low Profile Series ............................................................................................
BeCu PCI Series .........................................................................................................
BeCu Adhesive Mount Series ....................................................................................
BeCu Dome Top Series ..............................................................................................
BeCu Slot Mount Series .............................................................................................
BeCu Folded Series ...................................................................................................
BeCu Twist Series .......................................................................................................
BeCu Clip-On Series ..................................................................................................
BeCu Grounding Series .............................................................................................
BeCu Contact Series .................................................................................................
Metal D-Subs .............................................................................................................
Precision Metal Stampings ........................................................................................
TechSIL Conductive Elastomers ................................................................................
TechSIL Oriented Wire ...............................................................................................
TechMESH Knitted Wire ..............................................................................................
TechMESH Elastomer Core Wire ................................................................................
TechMESH Combo Strip .............................................................................................
TechMESH Tape .........................................................................................................
FSG Fabric Shielding Gaskets ...................................................................................
Shielding Fabrics & Conductive Tapes .....................................................................
CFS Conductive Foam Shielding Material ...............................................................
Custom and Die-Cut Shielding Gaskets ...................................................................
Products and Literature .............................................................................................
4
5
6
7
8
8
9
9
10
12
14
16
19
22
23
24
25
26
27
28
29
30
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 12/21/2007
DWG NO
8-S-21AH-XX-16
GASKET, STYLE AH
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.0025 BeCu ALLOY 172
H.T. TO 373 DPH
FINGER
PITCH
B
A
CPSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
3/31/2009
DWG NO
14-45DT-XX-15
DOME TOP SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
DJM
-
.0035 BeCu 172
-
HEAT TREAT TO 373 DPH
FINGER
PITCH
B
A
PSA TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG
ENG
10/14/2008
DWG NO
11-S-32AF-XX-16
SLOT MOUNT SERIES
SIZE
DSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
DJM
-
.0025 CuBe C17200 1/4 HT
-
AS REQ'D
B
D
FINGER
PITCH
-
-
-
-
C
A
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM
DWG NO
14-37FS-XX
FOLDED SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.003 BeCu ALLOY 172
FINGER
PITCH
B
A
CPSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
6-34T
T TWIST SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
PSA TAPE
B
C
A
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 11/15/2007
DWG NO
25-55CPS
CLIP ON GASKET
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.004 BeCu ALLOY 172
H.T. TO DPH 383
FINGER
PITCH B
A
C
INSIDE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET
1
OF
1
PREPARED
QA
ENG
DJM
8/28/2008
DWG NO
10-26UD-XX-16
CONTACT SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX
.005
.XX
.01
.X
.1 ANGLES
2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.006 BeCu 172
FINGER
PITCH
B
A.07
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
12/3/2008
DWG NO
8-45-LPAH-XX-16
LOW PROFILE SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
C
DJM
-
.0035 BeCu 172
-
-
FINGER
PITCH
B
A
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 1/23/2009
DWG NO
8-19PCI-XX-XX
GASKET, PCI SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
M. Paul
-
.002 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
35
36
37
39
18
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
14-18ML
GROUNDING GASKET
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.0045"CuBe C17200 1/4 H
-
HT TO FULL HARD
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
C
.056 TYP
B
A
PITCH .50 TYP
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
Copper Beryllium Fingerstock
4
EMI designers know and trust the consistent performance
of Fingerstock (CuBe) gaskets. To date, CuBe yields the
best electrical spring contact available in this industry. The
copper beryllium mills have well established techniques
and for decades have produced CuBe alloys per ASTM,
SAE, JIS, and DIN specifications.
Leader Tech uses only proven technology in creating
copper beryllium springs, contacts and gaskets. Beginning
with Alloy 25 (1/4 hard) BeCu, we stamp, form, and post
heat-treat to a hardness of 340 to 390 DPH. This process
is preferred in the EMI shielding industry because it has
proven to produce the best electrical spring contacts.
Leader Tech CuBe EMI shielding gaskets are the most
reliable in the industry.
Leader Tech manufactures a wide variety of standard
styles and sizes of CuBe gaskets. These gaskets operate in
spaces from .010 inches up to .410 inches. Using CuBe
materials as thin as .002 inch, we also offer many styles
as soft gaskets that provide the low compression force
needed in many applications. Leader Tech also designs
and manufactures custom spring contacts and gaskets.
Copper Beryllium – The Material of Choice
APPLICATION OF FINGERSTOCK GASKETS
FINGERSTOCK GASKETS
DO TWO THINGS VERY WELL:
1. Their mechanical spring characteristics far surpass
all other gaskets in the industry.
2. They offer the highest EMI shielding effectiveness.
Leader Tech has been designing and manufacturing
Fingerstock Gaskets since the early days of the computer
and electronics industries. We combine these years of
manufacturing and EMI experience with one key ingredient
– the needs of the customer.
Our innovative Fingerstock Gasket designs are a direct
result of our experience and customer input. Our Compact
PCI line of EMI Gaskets is an example of a design that was
driven by the needs of a customer and evolved into a line
of gaskets that meet all the requirements for Compact PCI
faceplate standards while providing superior mechanical
and shielding performance.
Leader Tech offers many standard off-the-shelf
Fingerstock Gaskets as well as the engineering and
custom manufacturing experience to help you solve your
application. Whether you need one prototype or a large
quantity order, our team at Leader Tech is available to
respond to your needs.
EMI Enclosure Shielding Solutions 5
The data presented is based on testing and to our knowledge is accurate and true. Since applications, test methods, and
test procedures may vary, we recommend that users of our products perform their own test to assure the suitability of these
specific applications. We offer no product warranty, either expressed or implied, except that any product proven defective
will be replaced. Freedom from present or future patent infringement cannot be guaranteed, nor can the suitability of our
products for specific applications.
COMPRESSION/DEFLECTION PERFORMANCE
Leader Tech.
Part No.
Design
Compressed
Height
Compression
Force
(lbs./linear ft.)
3-23T 0.018 (0.46) 25
6-34T 0.049 (1.24) 33
6-50T2 0.049 (1.24) 43
9-19UD 0.072 (1.83) 30
11-32RH 0.035 (0.89) 34
11-45C 0.090 (2.29) 19
Leader Tech.
Part No.
Design
Compressed
Height
Compression
Force
(lbs./linear ft.)
14-45DT 0.098 (2.49) 24
22-60AH 0.140 (3.56) 25
22-60RH 0.070 (1.78) 48
23-76FSC 0.130 (3.30) 34
25-109C 0.140 (3.56) 36
25-78FS 0.150 (3.81) 36
0
10
20
30
40
50
60
70
0.0500.0600.0700.0800.0900.1000.110
Force per Linear Foot (lb/ft)
Height Under Compression (in)
11-28FS
Average Force/Linear Foot vs. Compressed Height
Copper Beryllium Fingerstock
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
Copper Beryllium Fingerstock
6
When placing an order or requesting a quotation, please give part number, your required finish I.D. from the
chart below, and required length.
Leader Tech tape mounted CuBe gaskets offer pressure-sensitive, double-sided adhesive for
strong bonding to a wide variety of surface conditions. Ideal for all-purpose contact strips used in
metal cabinets and electronic enclosures and is unaffected by temperatures from -67 to +250°F
(-55 to 121°C)
Simply follow these four easy steps:
1. Remove all grease and oily residue with a solvent such as isopropyl alcohol/water mixture
(rubbing alcohol) or heptane. Dry and smooth the mounting surface with emery cloth if
necessary.
2. Peal off the protective paper backing from the pressure sensitive adhesive tape.
3. Place the gasket in correct position. Press firmly to ensure a good bond to surface. Avoid
repositioning, which might impair the effectiveness of the adhesive or may bend or kink the
strip. NOTE: On strips where fingers cover the solid portion of the gasket, pressure may be
applied by inserting a mandrel in the strip and pressing down.
4. At room temperature approximately 50% of the ultimate strength will be achieved after 20
minutes, 90% after 24 hours, and 100% after 72 hours. In some cases, bond strength can
be increased and ultimate bond strength can be achieved more quickly by exposure of the
bond to elevated temperature, e.g., 150°F (66°C) for 1 hour.
The above example is the “Slot Mount Series” gasket shown on page 11. The height is .11 inch and the
width is .32 inch. The “-S-” indicates a soft gasket. The “SN” indicates a bright tin finish. See list below for
available finishes. This part is available in lengths of 16 inches. Consult factory for custom lengths or for
availability in 25’ coils.
Standard plating finish is .0001
inch (.0025 mm) minimum.
Plating processes and
thicknesses may be varied
to meet customer needs.
Standard plating finish for
gold is 0.00005 inches. See
adjacent list of available
finishes and consult factory for
additional options.
ORDERING INFORMATION
ADHESIVE MOUNTING OF FINGERSTOCK GASKETS
Available Plating Finishes:
Finish Type Applicable Specifications Leader Tech Finish Code
Bright Finish - BD
Bright Tin ASTM B-545, CLASS A SN
Satin/Matte Tin ASTM B-545, CLASS A ST
Tin Lead ASTM B-579, SC2 SNpb
Electro-less Nickel RoHS ASTM B-733, SC 1, CLASS 1 NI
Zinc/Chromate Clear ASTM B-633, SC1, TYPE III Zinc
Zinc/Chromate Yellow ASTM B-633, SC1, TYPE II ZincY
Clear Cadmium Chromate ASTM B-766, CLASS 5, TYPE III CDC
Yellow Cadmium Chromate ASTM B-766,CLASS 5, TYPE II CDY
Bright Silver ASTM B-700, TYPE 2, GRADE B, CLASS N AG
Satin/Matte Silver ASTM B-700, TYPE 2, GRADE A, CLASS N MAG
Gold ASTM B-488, TYPE I, CODE C, CLASS 1.25 AU
Solderable Unplated - SU
PART NUMBER EXAMPLE:
Stock Item Finish Code Length
11-S-32RH – SN – 16
EMI Enclosure Shielding Solutions
METALS GALVANIC COMPATIBILITY CHART
Group
Number
Metallurgical Category
Anodic
Index
(V)
Compatible Surface Finishes
Gold Silver Nickel Be-Cu Tin Sn-Pb Zinc
1
Gold, solid and plated, Wrought platinum, graphite carbon 0.00
2 0.05
3 Rhodium plating 0.10
4 Silver, high-silver alloys 0.15
5 0.20
6 0.25
7 Nickel, nickel-copper alloys, titanium, titanium alloys, Monel 0.30
8Beryllium Copper, low brasses or bronzes, silver solder, copper, Ni-Cr alloys, austenitic corrosion
resistant steels, most chrome-moly steels, specialty high-temp stainless steels 0.35
9 Commercial yellow brasses and bronzes 0.40
10 High brasses and bronzes, naval brass, Muntz metal 0.45
11 18% Cr type corrosion resistant steels, common 300 series stainless steels 0.50
12 0.55
13 Chromium or tin plating; 12% Cr type corrosion resistant steels, most 400
series stainless steels, i.e., 410 and some cast stainless steels 0.60
14 Terreplate, tin-lead solder 0.65
15 Lead; high-lead alloys 0.70
16 Wrought 2000 series aluminum alloys 0.75
17 0.80
18 Wrought aluminum alloys except 2000 series cast Al-Si alloys, 6000 series aluminum 0.85
19 0.90
20 Cast aluminum alloys other than Al-Si; cadmium plating 0.95
21 1.00
22 1.05
23 1.10
24 1.15
25 Hot Dipped galvanized or electrogalvanized steel 1.20
26 Wrought zinc; zinc die cast alloys 1.25
27 1.30
28 1.35
29 1.40
30 1.45
31 1.50
32 1.55
33 1.60
34 1.65
35 1.70
36 Wrought and cast magnesium alloys 1.75
37 1.80
38 Beryllium 1.85
*Harsh Environment .10 volts Max *Normal Environment .25 volts Max. *Office Environment .50 volts Max
7
Copper Beryllium Fingerstock
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
8
Copper Beryllium Fingerstock
LOW PROFILE SERIES
High performance Compact PCI Gaskets designed for easy card insertion in rack mount
applications. This gasket is available in two different sizes to accommodate different customer
extrusions. They are available in both Copper Beryllium and Stainless Steel.
MOUNTING
OPTIONS
■ Extrusion
Directional Force
XX - Select material/finish (see page 6)
MOUNTING
OPTIONS
■ Tape
The low profile series gaskets incorporate design features that allow for some of the lowest
compression forces in the industry, while achieving high performance shielding effective-
ness. These gaskets are ideally suited for small aperture applications.
XX - Select material/finish (see page 6)
Directional Force
LPAH | Low Profile Adhesive Mount
Black = inches Blue = mm
PART NUMBER A B FINGER PITCH MAT. THICK LENGTH FINGERS TAPE
8-45LPAH-XX-16
0.08 2.03 0.45 11.43 0.100 2.54 0.125 3.18 0.004 0.102 16 406 128 0.145
8-S-45LPAH-XX-16
0.08 2.03 0.45 11.43 0.100 2.54 0.125 3.18 0.003 0.076 16 406 128 0.145
12-60LPAH-XX-16
0.12 3.05 0.60 15.24 0.100 2.54 0.125 3.18 0.004 0.102 16 406 128 0.200
12-S-60LPAH-XX-16
0.12 3.05 0.60 15.24 0.100 2.54 0.125 3.18 0.003 0.076 16 406 128 0.200
MOUNTING
OPTIONS
■ Tape
Directional Force
XX - Select material/finish (see page 6)
LPH | Low Profile Hook
Black = inches Blue = mm
PART NUMBER A B FINGER PITCH MAT. THICK LENGTH FINGERS HOOK ID TAPE
6-45LPH-060-XX-16
0.06 1.52 0.45 11.43 0.100 2.54 0.125 3.18 0.004 0.102 16 406 128 0.060 0.145
6-S-45LPH-060-XX-16
0.06 1.52 0.45 11.43 0.100 2.54 0.125 3.18 0.003 0.076 16 406 128 0.060 0.145
PCI SERIES
PCI | Contact
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MAT. THICK LENGTH FINGERS
7-19PCI-XX-4.6
0.07 1.78 0.18 4.57 0.05 1.27 0.01 0.25 0.180 4.57 0.200 5.08 0.002 0.051 4.60 117 23
7-19PCI-XX-9.0
0.07 1.78 0.18 4.57 0.05 1.27 0.01 0.25 0.180 4.57 0.200 5.08 0.002 0.051 9.00 229 45
7-19PCI-XX-14.4
0.07 1.78 0.18 4.57 0.05 1.27 0.01 0.25 0.180 4.57 0.200 5.08 0.002 0.051 14.40 366 72
7-19PCI-SS-4.6
0.07 1.78 0.18 4.57 0.05 1.27 0.01 0.25 0.180 4.57 0.200 5.08 0.002 0.051 4.60 117 23
7-19PCI-SS-9.0
0.07 1.78 0.18 4.57 0.05 1.27 0.01 0.25 0.180 4.57 0.200 5.08 0.002 0.051 9.00 229 45
7-19PCI-SS-14.4
0.07 1.78 0.18 4.57 0.05 1.27 0.01 0.25 0.180 4.57 0.200 5.08 0.002 0.051 14.40 366 72
8-19PCI-XX-4.6
0.07 1.78 0.19 4.83 0.05 1.27 0.02 0.51 0.180 4.57 0.200 5.08 0.002 0.051 4.60 117 23
8-19PCI-XX-9.0
0.07 1.78 0.19 4.83 0.05 1.27 0.02 0.51 0.180 4.57 0.200 5.08 0.002 0.051 9.00 229 45
8-19PCI-XX-14.4
0.07 1.78 0.19 4.83 0.05 1.27 0.02 0.51 0.180 4.57 0.200 5.08 0.002 0.051 14.40 366 72
8-19PCI-SS-4.6
0.07 1.78 0.19 4.83 0.05 1.27 0.02 0.51 0.180 4.57 0.200 5.08 0.002 0.051 4.60 117 23
8-19PCI-SS-9.0
0.07 1.78 0.19 4.83 0.05 1.27 0.02 0.51 0.180 4.57 0.200 5.08 0.002 0.051 9.00 229 45
8-19PCI-SS-14.4
0.07 1.78 0.19 4.83 0.05 1.27 0.02 0.51 0.180 4.57 0.200 5.08 0.002 0.051 14.40 366 72
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
12/3/2008
DWG NO
8-45-LPAH-XX-16
LOW PROFILE SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
C
DJM
-
.0035 BeCu 172
-
-
FINGER
PITCH
B
A
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 1/23/2009
DWG NO
8-19PCI-XX-XX
GASKET, PCI SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
M. Paul
-
.002 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
B
A
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
8-45LPH-060
LPH, LOW PROFILE HOOK SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A1
-
.0035" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH B
A
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 1/23/2009
DWG NO
8-19PCI-XX-XX
GASKET, PCI SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
M. Paul
-
.002 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
12/3/2008
DWG NO
8-45-LPAH-XX-16
LOW PROFILE SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
C
DJM
-
.0035 BeCu 172
-
-
FINGER
PITCH
B
A
PSA TAPE
EMI Enclosure Shielding Solutions 9
Copper Beryllium Fingerstock
The AH series gaskets are adhesive mounted general-purpose gaskets used in both compres-
sion and wiping applications. Sizes range from .11” (2.8mm) to .32” (8.1 mm) in height.
Applications include electronic enclosures, shielded cabinets, and MRI chamber doors.
XX - Select material/finish (see page 6)
Directional Force
MOUNTING
OPTIONS
■ Tape
MOUNTING
OPTIONS
■ Tape
The Dome Top “Solid” Series gaskets have a strip that connects each finger along
the top. This allows for unique angular wiping action without snagging. Other features
are the same as the Dome Top Series.
XX - Select material/finish (see page 6)
Directional Force
The Dome Top Gaskets are known for their large surface area for electrical contact and smooth wiping action. Also
available in a solid top profile allowing for omni-directional wiping. Together with the Slot Mount Series, the Dome Top
Gaskets are a mainstay in the enclosure/chassis industries. Commonly mounted with adhesive tape.
Directional Force
MOUNTING
OPTIONS
■ Tape
The Dome Top gaskets have fully independent fingers that are adhesive mounted.
Their smooth curve provides a large area for electrical contact and smooth
wiping action.
XX - Select material/finish (see page 6)
ADHESIVE MOUNT SERIES
AH | Adhesive Mount
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B C FINGER PITCH MAT. THICK
COMP WIDTH COMP HEIGHT
LENGTH FINGERS TAPE
11-32AH-XX-16
0.11 2.79 0.32 8.13 0.20 5.08 0.170 4.32 0.187 4.75 0.003 0.076 0.39 9.91 0.04 1.02 16 406 86 0.145
11-S-32AH-XX-16
0.11 2.79 0.32 8.13 0.20 5.08 0.170 4.32 0.187 4.75 0.002 0.051 0.39 9.91 0.04 1.02 16 406 86 0.145
13-37AH-XX-16
0.13 3.30 0.37 9.40 0.21 5.33 0.225 5.72 0.250 6.35 0.003 0.076 0.51 12.95 0.05 1.27 16 406 64 0.145
13-S-37AH-XX-16
0.13 3.30 0.37 9.40 0.21 5.33 0.225 5.72 0.250 6.35 0.002 0.051 0.51 12.95 0.05 1.27 16 406 64 0.145
14-38AH-XX-16
0.14 3.56 0.38 9.65 0.20 5.08 0.343 8.71 0.375 9.53 0.004 0.102 0.53 13.46 0.05 1.27 16 406 43 0.145
22-60AH-XX-16
0.22 5.59 0.60 15.24 0.28 7.11 0.344 8.74 0.375 9.53 0.005 0.127 0.73 18.54 0.09 2.29 16 406 43 0.200
22-S-60AH-XX-16
0.22 5.59 0.60 15.24 0.28 7.11 0.344 8.74 0.375 9.53 0.003 0.076 0.73 18.54 0.09 2.29 16 406 43 0.200
32-78AH-XX-16
0.32 8.13 0.78 19.81 0.45 11.43 0.344 8.74 0.375 9.53 0.004 0.102 0.98 24.89 0.12 3.05 16 406 43 0.375
32-S-78AH-XX-16
0.32 8.13 0.78 19.81 0.45 11.43 0.344 8.74 0.375 9.53 0.003 0.076 0.98 24.89 0.12 3.05 16 406 43 0.375
DOME TOP SERIES
DT | Dome Top
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B FINGER PITCH MAT. THICK
COMP WIDTH COMP HEIGHT
LENGTH FINGERS TAPE
11-35DT-XX-15
0.11 2.79 0.35 8.89 0.169 4.29 0.187 4.75 0.003 0.076 0.38 9.65 0.06 1.52 15 381 80 0.100
11-S-35DT-XX-15
0.11 2.79 0.35 8.89 0.169 4.29 0.187 4.75 0.002 0.051 0.38 9.65 0.06 1.52 15 381 80 0.100
14-45DT-XX-15
0.14 3.56 0.45 11.43 0.228 5.79 0.250 6.35 0.003 0.076 0.51 12.95 0.07 1.78 15 381 60 0.100
14-S-45DT-XX-15
0.14 3.56 0.45 11.43 0.228 5.79 0.250 6.35 0.002 0.051 0.51 12.95 0.07 1.78 15 381 60 0.100
22-62DT-XX-15
0.22 5.59 0.62 15.75 0.345 8.76 0.375 9.53 0.004 0.102 0.76 19.30 0.10 2.54 15 381 40 0.200
22-S-62DT-XX-15
0.22 5.59 0.62 15.75 0.345 8.76 0.375 9.53 0.003 0.076 0.76 19.30 0.10 2.54 15 381 40 0.200
DTS | Dome Top Solid
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B FINGER PITCH MAT. THICK
COMP WIDTH COMP HEIGHT
LENGTH FINGERS TAPE
11-35DTS-XX-15
0.11 2.79 0.35 8.89 0.169 4.29 0.187 4.75 0.003 0.076 0.38 9.65 0.06 1.52 15 381 80 0.100
11-S-35DTS-XX-15
0.11 2.79 0.35 8.89 0.169 4.29 0.187 4.75 0.002 0.051 0.38 9.65 0.06 1.52 15 381 80 0.100
14-45DTS-XX-15
0.14 3.56 0.45 11.43 0.250 6.35 0.250 6.35 0.003 0.076 0.51 12.95 0.07 1.78 15 381 60 0.100
14-S-45DTS-XX-15
0.14 3.56 0.45 11.43 0.250 6.35 0.250 6.35 0.002 0.051 0.51 12.95 0.07 1.78 15 381 60 0.100
22-62DTS-XX-15
0.22 5.59 0.62 15.75 0.345 8.76 0.375 9.53 0.004 0.102 0.76 19.30 0.10 2.54 15 381 40 0.200
22-S-62DTS-XX-15
0.22 5.59 0.62 15.75 0.345 8.76 0.375 9.53 0.003 0.076 0.76 19.30 0.10 2.54 15 381 40 0.200
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
3/31/2009
DWG NO
14-45DT-XX-15
DOME TOP SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
DJM
-
.0035 BeCu 172
-
HEAT TREAT TO 373 DPH
FINGER
PITCH
B
A
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
3/31/2009
DWG NO
14-45DT-XX-15
DOME TOP SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
DJM
-
.0035 BeCu 172
-
HEAT TREAT TO 373 DPH
FINGER
PITCH
B
A
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM 5/10/2010
DWG NO
14-45DTS-XX-XX-MFG
GASKET, SOLID DOME TOP
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.0035 BeCu ALLOY 25 HEAT TREAT TO 373 DPH
B
A
FINGER
PITCH
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM 5/10/2010
DWG NO
14-45DTS-XX-XX-MFG
GASKET, SOLID DOME TOP
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.0035 BeCu ALLOY 25 HEAT TREAT TO 373 DPH
B
A
FINGER
PITCH
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 12/21/2007
DWG NO
8-S-21AH-XX-16
GASKET, STYLE AH
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.0025 BeCu ALLOY 172
H.T. TO 373 DPH
FINGER
PITCH
B
A
CPSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 12/21/2007
DWG NO
8-S-21AH-XX-16
GASKET, STYLE AH
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.0025 BeCu ALLOY 172
H.T. TO 373 DPH
FINGER
PITCH
B
A
CPSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
8-45LPH-060
LPH, LOW PROFILE HOOK SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A1
-
.0035" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH B
A
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 1/23/2009
DWG NO
8-19PCI-XX-XX
GASKET, PCI SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
M. Paul
-
.002 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
12/3/2008
DWG NO
8-45-LPAH-XX-16
LOW PROFILE SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
C
DJM
-
.0035 BeCu 172
-
-
FINGER
PITCH
B
A
PSA TAPE
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
10
Copper Beryllium Fingerstock
SLOT MOUNT SERIES
Slot mount gaskets are a standard in the electronic enclosure industry. These gaskets
are used in shorter lengths as ESD contacts and longer lengths as EMI gaskets, which
clip into slots or slide onto mounted tracks.
MOUNTING
OPTIONS
■ Slot
*May vary depending on application
XX - Select material/finish (see page 6)
Directional Force
AF | Alternate Finger Slot Mount
Black = inches Blue = mm
PART NUMBER A B C D *E *F *G FINGER PITCH MAT. THICK LENGTH FINGERS
11-32AF-XX-16
0.11 2.79 0.32 8.13 0.08 2.03 0.02 0.51 0.09 2.29 0.26 6.60 0.04 1.02 0.169 4.29 0.187 4.75 0.004 0.102 16 406 85
11-32AF3-XX-16
0.11 2.79 0.32 8.13 0.08 2.03 0.02 0.51 0.09 2.29 0.26 6.60 0.04 1.02 0.169 4.29 0.187 4.75 0.004 0.102 16 406 85
11-32AF4-XX-16
0.11 2.79 0.32 8.13 0.08 2.03 0.02 0.51 0.09 2.29 0.26 6.60 0.04 1.02 0.169 4.29 0.187 4.75 0.004 0.102 16 406 85
11-S-32AF-XX-16
0.11 2.79 0.32 8.13 0.08 2.03 0.02 0.51 0.09 2.29 0.26 6.60 0.04 1.02 0.169 4.29 0.187 4.75 0.002 0.051 16 406 85
11-S-32AF3-XX-16
0.11 2.79 0.32 8.13 0.08 2.03 0.02 0.51 0.09 2.29 0.26 6.60 0.04 1.02 0.169 4.29 0.187 4.75 0.002 0.051 16 406 85
11-S-32AF4-XX-16
0.11 2.79 0.32 8.13 0.08 2.03 0.02 0.51 0.09 2.29 0.26 6.60 0.04 1.02 0.169 4.29 0.187 4.75 0.002 0.051 16 406 85
22-60AF-XX-16
0.22 5.59 0.60 15.24 0.14 3.56 0.04 1.02 0.14 3.56 0.52 13.21 0.07 1.78 0.250 6.35 0.282 7.16 0.005 0.127 16 406 57
22-60AF3-XX-16
0.22 5.59 0.60 15.24 0.14 3.56 0.04 1.02 0.14 3.56 0.52 13.21 0.07 1.78 0.250 6.35 0.282 7.16 0.005 0.127 16 406 58
22-S-60AF-XX-16
0.22 5.59 0.60 15.24 0.14 3.56 0.04 1.02 0.14 3.56 0.52 13.21 0.07 1.78 0.250 6.35 0.282 7.16 0.003 0.076 16 406 57
22-S-60AF3-XX-16
0.22 5.59 0.60 15.24 0.14 3.56 0.04 1.02 0.14 3.56 0.52 13.21 0.07 1.78 0.250 6.35 0.282 7.16 0.003 0.076 16 406 58
Recommended Recommended Recommended
Alternate Finger Mounting Hole Recommendations
Material
Thickness
Length of slot and distance between slots
is dependent on hole mounting pattern
E
F
G
Mounting concepts
Variable Slot Mount Chart
PATTERN PITCH =
2 FINGER PITCHES
PATTERN PITCH =
3 FINGER PITCHES
PATTERN PITCH =
4 FINGER PITCHES
A PATTERN PITCH FOR 11-32AF AND 11-S-32AF
B PATTERN PITCH FOR 11-32AF3 AND 11-S-32AF3
C PATTERN PITCH FOR 11-32AF4 AND 11-S-32AF4
PATTERN PITCH =
2 FINGER PITCHES
PATTERN PITCH =
3 FINGER PITCHES
PATTERN PITCH =
4 FINGER PITCHES
A PATTERN PITCH FOR 11-32AF AND 11-S-32AF
B
PATTERN PITCH FOR 11-32AF3 AND 11-S-32AF3
C PATTERN PITCH FOR 11-32AF4 AND 11-S-32AF4
PATTERN PITCH =
2 FINGER PITCHES
PATTERN PITCH =
3 FINGER PITCHES
PATTERN PITCH =
4 FINGER PITCHES
A PATTERN PITCH FOR 11-32AF AND 11-S-32AF
B PATTERN PITCH FOR 11-32AF3 AND 11-S-32AF3
C PATTERN PITCH FOR 11-32AF4 AND 11-S-32AF4
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG
ENG
10/14/2008
DWG NO
11-S-32AF-XX-16
SLOT MOUNT SERIES
SIZE
DSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
DJM
-
.0025 CuBe C17200 1/4 HT
-
AS REQ'D
B
D
FINGER
PITCH
-
-
-
-
C
A
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG
ENG
10/14/2008
DWG NO
11-S-32AF-XX-16
SLOT MOUNT SERIES
SIZE
DSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
DJM
-
.0025 CuBe C17200 1/4 HT
-
AS REQ'D
B
D
FINGER
PITCH
-
-
-
-
C
A
EMI Enclosure Shielding Solutions 11
Copper Beryllium Fingerstock
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG
ENG
10/14/2008
DWG NO
11-S-32AF-XX-16
SLOT MOUNT SERIES
SIZE
DSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
DJM
-
.0025 CuBe C17200 1/4 HT
-
AS REQ'D
B
D
FINGER
PITCH
-
-
-
-
C
A
Slot Mount Series
Mounting concepts
Length of slot is dependent
on the number of fingers used
N
O
Material Thickness
RH Mounting Hole Pattern
P
SLOT MOUNT SERIES CONT.
RH | Slot Mount
Black = inches Blue = mm
PART NUMBER A B C D *N *O *P FINGER PITCH MAT. THICK LENGTH FINGERS
11-28RH-XX-16
0.11 2.79 0.28 7.11 0.08 2.03 0.02 0.51 0.09 2.29 0.22 5.59 0.04 1.02 0.169 4.29 0.187 4.75 0.003 0.076 16 406 86
11-S-28RH-XX-16
0.11 2.79 0.28 7.11 0.08 2.03 0.02 0.51 0.09 2.29 0.22 5.59 0.04 1.02 0.169 4.29 0.187 4.75 0.002 0.054 16 406 86
11-32RH-XX-16
0.11 2.79 0.32 8.13 0.09 2.29 0.02 0.51 0.09 2.29 0.26 6.60 0.04 1.02 0.169 4.29 0.187 4.75 0.003 0.076 16 406 86
11-S-32RH-XX-16
0.11 2.79 0.32 8.13 0.09 2.29 0.02 0.51 0.09 2.29 0.26 6.60 0.04 1.02 0.169 4.29 0.187 4.75 0.002 0.054 16 406 86
13-30RH-XX-16
0.13 3.30 0.30 7.62 0.09 2.29 0.03 0.76 0.09 2.29 0.25 6.35 0.05 1.27 0.169 4.29 0.187 4.75 0.004 0.102 16 406 86
13-37RH-XX-16
0.13 3.30 0.37 9.40 0.09 2.29 0.02 0.51 0.09 2.29 0.31 7.87 0.04 1.02 0.225 5.72 0.250 6.35 0.003 0.076 16 406 64
13-S-37RH-XX-16
0.13 3.30 0.37 9.40 0.09 2.29 0.02 0.51 0.09 2.29 0.31 7.87 0.04 1.02 0.225 5.72 0.250 6.35 0.002 0.054 16 406 64
22-60RH-XX-16
0.22 5.59 0.60 15.24 0.14 3.56 0.04 1.02 0.14 3.56 0.52 13.21 0.06 1.52 0.250 6.23 0.282 7.16 0.005 0.127 16 406 57
22-S-60RH-XX-16
0.22 5.59 0.60 15.24 0.14 3.56 0.04 1.02 0.14 3.56 0.52 13.21 0.06 1.52 0.250 6.35 0.282 7.16 0.003 0.076 16 406 57
Recommended Recommended Recommended
FINGER
PITCH
D
A
C
B
D
C
B
A
B
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
CAGE CODE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT BE USED, DUPLICATED
OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE
INCLUDING DESIGN, MANUFACTURE OR PROCUREMENT
WITHOUT THE WRITTEN PERMISSION OF LEADERTECH.
LEADERTECH DOES NOT GUARANTEE OR WARRANTY THE
PERFORMANCE CHARACTERISTICS.
MATERIAL:
FINISH:
APPROVED BY:
TITLE:
SIZE:
DWG. NO.:
REV:
1 OF 1
D
3:1
B
.XXX +/- .005 .XX +/- .010 .X +/- .020 ANGLES +/- 2
DRAWN BY:
11-32RH
4J674
A
AS REQ'D
0.004 CuBe C17200 1/4 HT
C
--
-
-
SHEET:
SCALE:
THIRD ANGLE
PROJECTION
UNLESS OTHERWISE SPECIFIED:
- ALL DIMENSIONS ARE IN INCHES
- PART SHALL BE FREE OF BURRS AND SHARP EDGES
- ALL DIMENSIONS SHOWN APPLY BEFORE
PLATINGS AND COATINGS
- RoHS COMPLIANT PER EU DIRECTIVE 2011/65/EU
- POI = POINT OF INTERSECTION
SLOT MOUNT SERIES
Directional Force
MOUNTING
OPTIONS
■ Slot
*May vary depending on application
XX - Select material/finish (see page 6)
FINGER
PITCH
D
A
C
B
D
C
B
A
B
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
CAGE CODE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT BE USED, DUPLICATED
OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE
INCLUDING DESIGN, MANUFACTURE OR PROCUREMENT
WITHOUT THE WRITTEN PERMISSION OF LEADERTECH.
LEADERTECH DOES NOT GUARANTEE OR WARRANTY THE
PERFORMANCE CHARACTERISTICS.
MATERIAL:
FINISH:
APPROVED BY:
TITLE:
SIZE:
DWG. NO.:
REV:
1 OF 1
D
3:1
B
.XXX +/- .005 .XX +/- .010 .X +/- .020 ANGLES +/- 2
DRAWN BY:
11-32RH
4J674
A
AS REQ'D
0.004 CuBe C17200 1/4 HT
C
--
-
-
SHEET:
SCALE:
THIRD ANGLE
PROJECTION
UNLESS OTHERWISE SPECIFIED:
- ALL DIMENSIONS ARE IN INCHES
- PART SHALL BE FREE OF BURRS AND SHARP EDGES
- ALL DIMENSIONS SHOWN APPLY BEFORE
PLATINGS AND COATINGS
- RoHS COMPLIANT PER EU DIRECTIVE 2011/65/EU
- POI = POINT OF INTERSECTION
SLOT MOUNT SERIES
0
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
12
Copper Beryllium Fingerstock
FS | Folded
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B C FINGER PITCH MAT. THICK COMP
LENGTH COMP
HEIGHT LENGTH FINGERS TAPE
11-28FS-XX-16
0.11 2.79 0.28 7.11 0.24 6.10 0.170 4.32 0.188 4.78 0.003 0.076 0.37 9.40 0.07 1.78 16 406 85 0.145
11-28FS-XX-300
0.11 2.79 0.28 7.11 0.24 6.10 0.170 4.32 0.188 4.78 0.003 0.076 0.37 9.40 0.07 1.78 300 7620 1596 0.145
11-S-28FS-XX-16
0.11 2.79 0.28 7.11 0.24 6.10 0.170 4.32 0.188 4.78 0.002 0.051 0.37 9.40 0.07 1.78 16 406 85 0.145
11-S-28FS-XX-300
0.11 2.79 0.28 7.11 0.24 6.10 0.170 4.32 0.188 4.78 0.002 0.051 0.37 9.40 0.07 1.78 300 7620 1596 0.145
14-37FS-XX-16
0.14 3.56 0.37 9.40 0.32 8.13 0.228 5.79 0.250 6.35 0.003 0.076 0.50 12.70 0.10 2.54 16 406 64 0.200
14-37FS-XX-300
0.14 3.56 0.37 9.40 0.32 8.13 0.228 5.79 0.250 6.35 0.003 0.076 0.50 12.70 0.10 2.54 300 7620 1200 0.200
14-S-37FS-XX-16
0.14 3.56 0.37 9.40 0.31 7.87 0.228 5.79 0.250 6.35 0.002 0.051 0.50 12.70 0.10 2.54 16 406 64 0.200
23-60FS-XX-24
0.23 5.84 0.60 15.24 0.50 12.70 0.343 8.71 0.375 9.53 0.004 0.102 0.77 19.56 0.12 3.05 24 610 64 0.250
23-60FS-XX-300
0.23 5.84 0.60 15.24 0.50 12.70 0.343 8.71 0.375 9.53 0.004 0.102 0.77 19.56 0.12 3.05 300 7620 800 0.250
25-78FS-XX-24
0.25 6.35 0.78 19.81 0.53 13.46 0.335 8.51 0.375 9.53 0.005 0.127 0.94 23.88 0.15 3.81 24 610 64 0.375
25-78FS-XX-300
0.25 6.35 0.78 19.81 0.53 13.46 0.340 8.64 0.375 9.53 0.005 0.127 0.94 23.88 0.15 3.81 300 7620 800 0.375
25-S-78FS-XX-24
0.25 6.35 0.78 19.81 0.53 13.46 0.335 8.51 0.375 9.53 0.003 0.076 0.94 23.88 0.15 3.81 24 610 64 0.375
25-S-78FS-XX-300
0.25 6.35 0.78 19.81 0.53 13.46 0.335 8.51 0.375 9.53 0.003 0.076 0.94 23.88 0.15 3.81 300 7620 800 0.375
41-113FS-XX-12
0.41 10.41 1.13 28.70 0.80 20.32 0.460 11.68 0.500 12.70 0.007 0.178 1.94 49.28 0.23 5.84 12 305 24 0.375
Leader Tech's Folded Gasket series are industry standard, general-purpose gaskets that allow a
large range of deflection and compression forces. These gaskets are available with or without
tape for alternate attachment methods. Also available in a snag-free version where, under
compression, the leading edge of the gasket slides into an extended and folded base which
prevents possible damage to the gasket.
MOUNTING
OPTIONS
■ Tape
■ Solder
■ Rivet
The Leader Tech FS gaskets are industry standard, general-purpose gaskets that allow a
large range of deflection and compression forces. These gaskets are available without tape
for alternate attachment methods. Consult factory for information.
XX - Select material/finish (see page 6)
Directional Force
MOUNTING
OPTIONS
■ Tape
■ Solder
■ Rivet
The FSC was created to provide snag free gaskets with FS gasket features. The base of the gasket
is extended from the mounting area and then folded up, over, down, and then comes to rest over
the leading edge of the formed spring. Under compression, the leading edge of the gasket slides
under and is “captured.” This “no snag” feature is also used to prevent possible gasket damage.
XX - Select material/finish (see page 6)
Directional Force
FOLDED SERIES
FSC | Folded
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B FINGER PITCH MAT. THICK COMP
HEIGHT LENGTH FINGERS TAPE
8-25FSC-XX-16
0.08 2.03 0.25 6.35 0.170 4.32 0.188 4.78 0.003 0.076 0.048 1.22 16 406 85 0.145
11-37FSC-XX-16
0.11 2.79 0.37 9.40 0.170 4.32 0.188 4.78 0.003 0.076 0.065 1.65 16 406 85 0.250
11-S-37FSC-XX-16
0.11 2.79 0.37 9.40 0.170 4.32 0.188 4.78 0.002 0.051 0.065 1.65 16 406 85 0.250
14-51FSC-XX-16
0.14 3.56 0.51 12.95 0.228 5.79 0.250 6.35 0.003 0.076 0.100 2.54 16 406 64 0.375
14-S-51FSC-XX-16
0.14 3.56 0.51 12.95 0.228 5.79 0.250 6.35 0.002 0.051 0.100 2.54 16 406 64 0.375
23-76FSC-XX-24
0.23 5.84 0.76 19.30 0.343 8.64 0.375 9.53 0.004 0.102 0.115 2.92 24 610 64 0.375
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM
DWG NO
14-37FS-XX
FOLDED SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.003 BeCu ALLOY 172
FINGER
PITCH
B
A
CPSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG DWG NO
14-51-FSC-XX-16
FOLDED SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
-
.003 BeCu ALLOY 25
-
HEAT TREAT TO DPH 373
OPTIONAL P
SA TAPE
B
A
FINGER
PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM
DWG NO
14-37FS-XX
FOLDED SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.003 BeCu ALLOY 172
FINGER
PITCH
B
A
CPSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG DWG NO
14-51-FSC-XX-16
FOLDED SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
-
.003 BeCu ALLOY 25
-
HEAT TREAT TO DPH 373
OPTIONAL PSA TAPE
B
A
FINGER
PITCH
EMI Enclosure Shielding Solutions 13
Copper Beryllium Fingerstock
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM
DWG NO
14-37FS-XX
FOLDED SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.003 BeCu ALLOY 172
FINGER
PITCH
B
A
CPSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG DWG NO
14-51-FSC-XX-16
FOLDED SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
-
.003 BeCu ALLOY 25
-
HEAT TREAT TO DPH 373
OPTIONAL PSA TAPE
B
A
FINGER
PITCH
MOUNTING
OPTIONS
■ Tape
■ Rivet
■ Solder
Directional
Force
The FSV is an FS gasket that has the base bent at a right angle to the curve of the spring form,
with all the other features of the FS gasket maintained. Tape optional - please consult factory.
XX - Select material/finish (see page 6)
MOUNTING
OPTIONS
■ Tape
■ Rivet
■ Solder
Directional
Force
The FSDS is an FS gasket with its base lying on the same plane as the curve in the spring form,
with the mounting area shortened. This mounting is often modified for custom applications.
XX - Select material/finish (see page 6)
FSV | Folded
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B C D E FINGER PITCH MAT. THICK COMP
WIDTH COMP
HEIGHT LENGTH FINGERS
11-28FSV23-XX-16
0.11 2.79 0.28 7.11 0.24 6.10 0.06 1.52 0.188 4.78 0.170 4.32 0.188 4.78 0.003 0.076 0.37 9.40 0.07 1.78 16 406 85
11-S-28FSV23-XX-16
0.11 2.79 0.28 7.11 0.24 6.10 0.06 1.52 0.188 4.78 0.170 4.32 0.188 4.78 0.002 0.051 0.37 9.40 0.07 1.78 16 406 85
14-37FSV30-XX-16
0.14 3.66 0.37 9.40 0.32 8.13 0.06 1.52 0.250 6.35 0.228 5.79 0.250 6.35 0.003 0.076 0.50 12.70 0.10 2.54 16 406 64
14-S-37FSV30-XX-16
0.14 3.66 0.37 9.40 0.32 8.13 0.06 1.52 0.250 6.35 0.228 5.79 0.250 6.35 0.002 0.051 0.50 12.70 0.10 2.54 16 406 64
23-60FSV50-XX-24
0.23 5.84 0.60 15.24 0.50 12.70 0.08 2.03 0.375 9.53 0.343 8.71 0.375 9.50 0.004 0.102 0.77 19.56 0.12 3.05 24 610 64
25-78FSV50-XX-24
0.25 6.35 0.78 19.81 0.50 12.70 0.14 3.56 0.375 9.53 0.335 8.51 0.375 9.50 0.005 0.127 0.94 23.88 0.15 3.81 24 610 64
25-S-78FSV50-XX-24
0.25 6.35 0.78 19.81 0.50 12.70 0.14 3.56 0.375 9.53 0.335 8.51 0.375 9.50 0.003 0.076 0.94 23.88 0.15 3.81 24 610 64
41-113FSV-XX-12
0.41 10.41 1.13 28.70 0.80 20.32 0.14 3.56 0.500 12.70 0.460 11.68 0.500 12.70 0.007 0.178 1.94 49.28 0.23 5.84 12 305 24
FOLDED SERIES CONT.
FSDS | Folded
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B C D E FINGER PITCH COMP
WIDTH COMP
HEIGHT MATERIAL
THICK LENGTH FINGERS
25-109FSDS-XX-24
0.25 6.35 1.09 27.69 0.16 4.06 0.14 3.56 0.38 9.65 0.335 8.51 0.375 9.53 1.27 32.26 0.15 3.81 0.005 0.127 24 610 64
25-109FSDS-XX-300
0.25 6.35 1.09 27.69 0.16 4.06 0.14 3.56 0.38 9.65 0.335 8.51 0.375 9.53 1.27 32.26 0.15 3.81 0.005 0.127 300 7620 800
25-S-109FSDS-XX-24
0.25 6.35 1.09 27.69 0.16 4.06 0.14 3.56 0.38 9.65 0.335 8.51 0.375 9.53 1.27 32.26 0.15 3.81 0.003 0.076 24 610 64
25-S-109FSDS-XX-300
0.25 6.35 1.09 27.69 0.16 4.06 0.14 3.56 0.38 9.65 0.335 8.51 0.375 9.53 1.27 32.26 0.15 3.81 0.003 0.076 300 7620 800
41-163FSDS-XX-24
0.41 10.41 1.63 41.40 0.19 4.83 0.14 3.56 0.50 12.70 0.460 11.68 0.500 12.70 1.90 48.26 0.23 5.84 0.007 0.178 24 610 48
41-163FSDS-XX-300
0.41 10.41 1.63 41.40 0.19 4.83 0.14 3.56 0.50 12.70 0.460 11.68 0.500 12.70 1.90 48.26 0.23 5.84 0.007 0.178 300 7620 600
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM
DWG NO
14-37FSV30-XX-16
FOLDED SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.003 BeCu ALLOY 25
H.T. TO DPH 373
FINGER
PITCH
B
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG DWG NO
25-S-109FSDS
GASKET, STYLE 25-S-109FSDS
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
-
.003 BeCu ALLOY 172
-
-
B
A
FINGER
PITCH
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG DWG NO
25-S-109FSDS
GASKET, STYLE 25-S-109FSDS
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
-
.003 BeCu ALLOY 172
-
-
B
A
FINGER
PITCH
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG DWG NO
25-S-109FSDS
GASKET, STYLE 25-S-109FSDS
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
-
.003 BeCu ALLOY 172
-
-
B
A
FINGER
PITCH
C
D
E
D
E
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM
DWG NO
14-37FSV30-XX-16
FOLDED SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.003 BeCu ALLOY 25
H.T. TO DPH 373
FINGER
PITCH
B
A
C
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM
DWG NO
14-37FSV30-XX-16
FOLDED SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.003 BeCu ALLOY 25
H.T. TO DPH 373
FINGER
PITCH
B
A
C
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
14
Copper Beryllium Fingerstock
The Twist series gaskets are designed for demanding compression applications. This series can
compress to material thickness and provide excellent shielding performance. Profiles include
standard flat, right angle, double twist, and clip-on.
MOUNTING
OPTIONS
■ Tape
■ Solder
Directional
Force
XX - Select material/finish (see page 6)
MOUNTING
OPTIONS
■ Tape
■ Solder
Directional
Force
XX - Select material/finish (see page 6)
T | Twist
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B C FINGER PITCH MATERIAL
THICK LENGTH FINGERS TAPE
3-20T-XX-24
0.03 0.76 0.20 5.08 0.11 2.79 0.080 2.03 0.095 2.41 0.003 0.076 24 610 253 0.100
3-20T-XX-300
0.03 0.76 0.20 5.08 0.11 2.79 0.080 2.03 0.095 2.41 0.003 0.076 300 7620 3158 0.100
3-23T-XX-24
0.03 0.76 0.23 5.84 0.14 3.56 0.080 2.03 0.095 2.41 0.003 0.076 24 610 253 0.100
3-23T-XX-300
0.03 0.76 0.23 5.84 0.14 3.56 0.080 2.03 0.095 2.41 0.003 0.076 300 7620 3158 0.100
3-S-23T-XX-24
0.03 0.76 0.23 5.84 0.14 3.56 0.080 2.03 0.095 2.41 0.002 0.051 24 610 253 0.100
3-S-23T-XX-300
0.03 0.76 0.23 5.84 0.14 3.56 0.080 2.03 0.095 2.41 0.002 0.051 300 7620 3158 0.100
6-30T-XX-24
0.07 1.78 0.30 7.62 0.15 3.81 0.150 3.81 0.165 4.19 0.003 0.076 24 610 146 0.100
6-30T-XX-300
0.07 1.78 0.30 7.62 0.15 3.81 0.150 3.81 0.165 4.19 0.003 0.076 300 7620 1818 0.100
6-S-30T-XX-24
0.07 1.78 0.30 7.62 0.15 3.81 0.150 3.81 0.165 4.19 0.002 0.051 24 610 146 0.145
6-S-30T-XX-300
0.07 1.78 0.30 7.62 0.15 3.81 0.150 3.81 0.165 4.19 0.002 0.051 300 7620 1818 0.145
6-34T-XX-24
0.07 1.78 0.34 8.64 0.18 4.57 0.150 3.81 0.165 4.19 0.003 0.076 24 610 146 0.145
6-34T-XX-300
0.07 1.78 0.34 8.64 0.18 4.57 0.150 3.81 0.165 4.19 0.003 0.076 300 7620 1818 0.145
6-S-34T-XX-24
0.07 1.78 0.34 8.64 0.18 4.57 0.150 3.81 0.165 4.19 0.002 0.051 24 610 146 0.145
6-S-34T-XX-300
0.07 1.78 0.34 8.64 0.18 4.57 0.150 3.81 0.165 4.19 0.002 0.051 300 7620 1818 0.145
TWIST SERIES
TV | Twist
Black = inches Blue = mm
PART NUMBER A B C FINGER PITCH MATERIAL
THICK LENGTH FINGERS TAPE
3-23TV-XX-24
0.03 0.76 0.08 2.03 0.16 4.06 0.080 2.03 0.095 2.41 0.003 0.076 24 610 253 0.100
3-23TV-XX-30
0.03 0.76 0.08 2.03 0.16 4.06 0.080 2.03 0.095 2.41 0.003 0.076 300 7620 3158 0.100
3-23TV30-XX-24
0.03 0.76 0.08 2.03 0.30 7.62 0.080 2.03 0.095 2.41 0.003 0.076 24 610 253 0.250
3-S-23TV-XX-24
0.03 0.76 0.08 2.03 0.16 4.06 0.080 2.03 0.095 2.41 0.002 0.051 24 610 253 0.100
3-S-23TV30-XX-300
0.03 0.76 0.08 2.03 0.30 7.62 0.080 2.03 0.095 2.41 0.002 0.051 300 7620 3158 0.250
6-34TV-XX-24
0.07 1.78 0.14 3.56 0.20 5.08 0.150 3.81 0.165 4.19 0.003 0.076 24 610 146 0.145
6-34TV-XX-300
0.07 1.78 0.14 3.56 0.20 5.08 0.150 3.81 0.165 4.19 0.003 0.076 300 7620 1818 0.145
6-S-34TV-XX-24
0.07 1.78 0.14 3.56 0.20 5.08 0.150 3.81 0.165 4.19 0.002 0.051 24 610 146 0.145
6-S-34TV-XX-300
0.07 1.78 0.14 3.56 0.20 5.08 0.150 3.81 0.165 4.19 0.002 0.051 300 7620 1818 0.145
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM 5/20/2010
DWG NO
6-34TV
TV TWIST SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
0.003" CuBe C17200 1/4 H
FINGER
PITCH
C
B
A
AS REQ'D
PSA TAPE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
6-34T
T TWIST SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
PSA TAPE
B
C
A
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
6-34T
T TWIST SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
PSA TAPE
B
C
A
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM 5/20/2010
DWG NO
6-34TV
TV TWIST SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
0.003" CuBe C17200 1/4 H
FINGER
PITCH
C
B
A
AS REQ'D
PSA TAPE
EMI Enclosure Shielding Solutions 15
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
6-34T
T TWIST SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
PSA TAPE
B
C
A
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM 5/20/2010
DWG NO
6-34TV
TV TWIST SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
0.003" CuBe C17200 1/4 H
FINGER
PITCH
C
B
A
AS REQ'D
PSA TAPE
Copper Beryllium Fingerstock
MOUNTING
OPTIONS
■ Clip
Directional
Force
MOUNTING
OPTIONS
■ Tape
Directional Force
XX - Select material/finish (see page 6)
XX - Select material/finish (see page 6)
MOUNTING
OPTIONS
■ Clip
Directional
Force
XX - Select material/finish (see page 6)
TWIST SERIES CONT.
T2 | Twist
Black = inches Blue = mm
PART NUMBER A B C FINGER PITCH MATERIAL
THICK LENGTH FINGERS TAPE
6-50T2-XX-24
0.07 1.78 0.50 12.70 0.18 4.57 0.150 3.81 0.165 4.19 0.003 0.076 24 610 146 0.145
6-50T2-XX-300
0.07 1.78 0.50 12.70 0.18 4.57 0.150 3.81 0.165 4.19 0.003 0.076 300 7620 1818 0.145
6-S-50T2-XX-24
0.07 1.78 0.50 12.70 0.18 4.57 0.150 3.81 0.165 4.19 0.002 0.051 24 610 146 0.145
6-S-50T2-XX-300
0.07 1.78 0.50 12.70 0.18 4.57 0.150 3.81 0.165 4.19 0.002 0.051 300 7620 1818 0.145
UT | Twist
Black = inches Blue = mm
PART NUMBER A B FINGER PITCH MATERIAL
THICK LENGTH FINGERS CLIP ID LANCE LANCE
PITCH
3-23UT-040-XX-16
0.03 0.76 0.15 3.81 0.080 2.03 0.095 2.41 0.003 0.076 16 406 168 0.04 1.02 n/a n/a
3-23UT-070-XX-16
0.03 0.76 0.15 3.81 0.080 2.03 0.095 2.41 0.003 0.076 16 406 168 0.07 1.78 n/a n/a
3-23UT-070-DL-XX-16
0.03 0.76 0.15 3.81 0.080 2.03 0.095 2.41 0.003 0.076 16 406 168 0.07 1.78 D 1”
6-34UT-040-XX-16
0.07 1.78 0.22 5.59 0.150 3.81 0.165 4.19 0.003 0.076 16 406 97 0.04 1.02 n/a n/a
6-34UT-070-XX-16
0.07 1.78 0.22 5.59 0.150 3.81 0.165 4.19 0.003 0.076 16 406 97 0.07 1.78 n/a n/a
6-34UT-070-DL-XX-16
0.07 1.78 0.22 5.59 0.150 3.81 0.165 4.19 0.003 0.076 16 406 97 0.07 1.78 D 1”
UT3 | Twist
Black = inches Blue = mm
PART NUMBER A B C FINGER PITCH MATERIAL
THICK LENGTH FINGERS CLIP ID LANCE LANCE
PITCH
6-34UT3-050-XX-16
0.07 1.78 0.38 9.65 0.22 5.59 0.150 3.81 0.165 4.19 0.003 0.076 16 406 97 0.05 1.27 n/a n/a
6-34UT3-050-DL-XX-16
0.07 1.78 0.38 9.65 0.22 5.59 0.150 3.81 0.165 4.19 0.003 0.076 16 406 97 0.05 1.27 D 1”
6-34UT3-070-XX-16
0.07 1.78 0.38 9.65 0.22 5.59 0.150 3.81 0.165 4.19 0.003 0.076 16 406 97 0.07 1.78 n/a n/a
6-34UT3-070-DL-XX-16
0.07 1.78 0.38 9.65 0.22 5.59 0.150 3.81 0.165 4.19 0.003 0.076 16 406 97 0.07 1.78 D 1”
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
8/28/2008
DWG NO
6-50T2
TWISTED SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
DJM
-
0.003" BeCu C17200 1/4H
-
AS REQ'D
PSA TAPE B
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
8/19/2008
DWG NO
6-34UT-040-D
UT, TWIST SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
M. Paul
-
0.003" BeCu C17200 1/4H
-
AS REQ'D
B
PITCH
FINGER A
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
8/19/2008
DWG NO
6-34UT-040-D
UT, TWIST SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
M. Paul
-
0.003" BeCu C17200 1/4H
-
AS REQ'D
B
PITCH
FINGER
A
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
5/20/2010
DWG NO
6-34UT3-060
UT3, TWIST SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
DJM
-
0.003" BeCu C17200 1/4H
-
AS REQ'D
B
C
A
FINGER
PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
5/20/2010
DWG NO
6-34UT3-060
UT3, TWIST SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
DJM
-
0.003" BeCu C17200 1/4H
-
AS REQ'D
B
C
A
FINGER
PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
8/28/2008
DWG NO
6-50T2
TWISTED SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
DJM
-
0.003" BeCu C17200 1/4H
-
AS REQ'D
PSA TAPE
A
BC
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
16
Copper Beryllium Fingerstock
■ Clip
Directional Force
XX - Select material/finish (see page 6)
CLIP-ON SERIES
C | Clip-On
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B C FINGER PITCH MATERIAL
THICK
COMP
WIDTH
COMP
HEIGHT LANCE
START LANCE
PITCH FINGERS LANCE
10-30CD-XX-16
0.10 2.54 0.30 7.62 0.07 1.78 0.135 3.43 0.182 4.62 0.005 0.127 0.33 8.38 0.05 1.27 0.341 8.66 0.728 18.49 88 D
10-30CT-XX-16
0.10 2.54 0.30 7.62 0.07 1.78 0.135 3.43 0.182 4.62 0.005 0.127 0.33 8.38 0.05 1.27 0.341 8.66 0.728 18.49 88 T
11-45CD-XX-16
0.11 2.79 0.45 11.43 0.07 1.78 0.147 3.73 0.193 4.90 0.005 0.127 0.47 11.94 0.06 1.52 0.267 6.78 0.748 19.00 84 D
11-45CT-XX-16
0.11 2.79 0.45 11.43 0.07 1.78 0.147 3.73 0.193 4.90 0.005 0.127 0.47 11.94 0.06 1.52 0.651 16.54 1.352 34.34 84 T
The Clip-On Gaskets are used in enclosures, shielded cabinets, and on circuit cards as ESD contacts and EMI gaskets.
For edge mount applications, close attention must be given to clip size, lance requirements, deflection parameters
and finger configuration. Leader Tech provides application assistance in the development of specifications.
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A.
PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
10-30CD
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
10-30CT
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
D
.005
.01
.1
QA APPROVAL
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B
. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
10-30CT
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
LANCE PITCH
A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
A
B
C
INSIDE LANCE PITCH
.60
11-45CD
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH
A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
LANCE PITCH
A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
A
B
C
INSIDE LANCE PITCH
.60
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D.
PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
A
B
C
INSIDE LANCE PITCH
.60
11-45CT
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH
A
B
C
INSIDE
LANCE PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE
LANCE PITCH
EMI Enclosure Shielding Solutions 17
Copper Beryllium Fingerstock
■ Clip
Directional Force
Consult factory for optional clip sizes and optional lance features.
XX - Select material/finish (see page 6)
C | Clip-On
Black = inches Blue = mm Comp = Compressed
PART NUMBER A B C FINGER PITCH MATERIAL
THICK
COMP
WIDTH
COMP
HEIGHT LANCE
START LANCE
PITCH FINGERS LANCE
10-30C-045-XX-16
0.10 2.54 0.30 7.62 0.045 1.14 0.140 3.56 0.187 4.75 0.005 0.127 0.33 8.38 0.05 1.27 - - - - 86 n/a
10-30C-050-XX-16
0.10 2.54 0.30 7.62 0.050 1.27 0.140 3.56 0.187 4.75 0.005 0.127 0.33 8.38 0.05 1.27 - - - - 86 n/a
10-30C-065-XX-16
0.10 2.54 0.30 7.62 0.065 1.65 0.140 3.56 0.187 4.75 0.005 0.127 0.33 8.38 0.05 1.27 - - - - 86 n/a
10-30C-070-XX-16
0.10 2.54 0.30 7.62 0.070 1.78 0.140 3.56 0.187 4.75 0.005 0.127 0.33 8.38 0.05 1.27 - - - - 86 n/a
10-30C-045-DL-XX-16
0.10 2.54 0.30 7.62 0.045 1.14 0.140 3.56 0.187 4.75 0.005 0.127 0.33 8.38 0.05 1.27 0.5 12.7 125.4 86 D
10-30C-050-DL-XX-16
0.10 2.54 0.30 7.62 0.050 1.27 0.140 3.56 0.187 4.75 0.005 0.127 0.33 8.38 0.05 1.27 0.5 12.7 125.4 86 D
10-30C-065-DL-XX-16
0.10 2.54 0.30 7.62 0.065 1.65 0.140 3.56 0.187 4.75 0.005 0.127 0.33 8.38 0.05 1.27 0.5 12.7 125.4 86 D
10-30C-070-DL-XX-16
0.10 2.54 0.30 7.62 0.070 1.78 0.140 3.56 0.187 4.75 0.005 0.127 0.33 8.38 0.05 1.27 0.5 12.7 125.4 86 D
11-45C-045-XX-16
0.11 2.79 0.45 11.43 0.045 1.14 0.140 3.56 0.187 4.75 0.005 0.127 0.47 11.94 0.06 1.52 - - - - 86 n/a
11-45C-050-XX-16
0.11 2.79 0.45 11.43 0.050 1.27 0.140 3.56 0.187 4.75 0.005 0.127 0.47 11.94 0.06 1.52 - - - - 86 n/a
11-45C-065-XX-16
0.11 2.79 0.45 11.43 0.065 1.65 0.140 3.56 0.187 4.75 0.005 0.127 0.47 11.94 0.06 1.52 - - - - 86 n/a
11-45C-070-XX-16
0.11 2.79 0.45 11.43 0.070 1.78 0.140 3.56 0.187 4.75 0.005 0.127 0.47 11.94 0.06 1.52 - - - - 86 n/a
11-45C-045-DL-XX-16
0.11 2.79 0.45 11.43 0.045 1.14 0.140 3.56 0.187 4.75 0.005 0.127 0.47 11.94 0.06 1.52 0.5 12.7 125.4 86 D
11-45C-050-DL-XX-16
0.11 2.79 0.45 11.43 0.050 1.27 0.140 3.56 0.187 4.75 0.005 0.127 0.47 11.94 0.06 1.52 0.5 12.7 125.4 86 D
11-45C-065-DL-XX-16
0.11 2.79 0.45 11.43 0.065 1.65 0.140 3.56 0.187 4.75 0.005 0.127 0.47 11.94 0.06 1.52 0.5 12.7 125.4 86 D
11-45C-070-DL-XX-16
0.11 2.79 0.45 11.43 0.070 1.78 0.140 3.56 0.187 4.75 0.005 0.127 0.47 11.94 0.06 1.52 0.5 12.7 125.4 86 D
25-109C-070-XX-16
0.25 6.35 1.09 27.69 0.070 1.78 0.340 8.64 0.375 9.53 0.005 0.127 1.27 32.26 0.08 2.03 - - - - 43 n/a
25-109C-070-DL-XX-16
0.25 6.35 1.09 27.69 0.070 1.78 0.340 8.64 0.375 9.53 0.005 0.127 1.27 32.26 0.08 2.03 0.5 12.7 125.4 43 D
25-S-109C-070-XX-16
0.25 6.35 1.09 27.69 0.070 1.78 0.340 8.64 0.375 9.53 0.003 0.076 1.27 32.26 0.08 2.03 - - - - 43 n/a
25-S-109C-070-DL-XX-16
0.25 6.35 1.09 27.69 0.070 1.78 0.340 8.64 0.375 9.53 0.003 0.076 1.27 32.26 0.08 2.03 0.5 12.7 125.4 43 D
25-109C-120-XX-16
0.25 6.35 1.09 27.69 0.120 3.05 0.340 8.64 0.375 9.53 0.005 0.127 1.27 32.26 0.08 2.03 - - - - 43 n/a
25-109C-130-XX-16
0.25 6.35 1.09 27.69 0.130 3.30 0.340 8.64 0.375 9.53 0.005 0.127 1.27 32.26 0.08 2.03 - - - - 43 n/a
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
10-30C-045
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
A
C
INSIDE
B
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
10-30C-045
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
A
C
INSIDE
B
■ Clip
Directional Force
XX - Select material/finish (see page 6)
C | Mini-Clip
Black = inches Blue = mm
PART NUMBER A B C FINGER PITCH MATERIAL
THICK LANCE
START LANCE
PITCH LENGTH FINGERS CLIP ID LANCE
7-21C-045-DL-XX-16
0.07 1.78 0.25 6.35 0.03 0.76 0.170 4.32 0.200 5.08 0.003 0.076 0.49 12.45 1.00 25.40 16 406 80 0.045 D
CLIP-ON SERIES CONT.
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
4/8/2008
DWG NO
7-21C-045-DL-16
GASKET, CLIP ON
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
C
DJM
-
.003 BeCu 172
-
-
FINGER
PITCH
B
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
4/8/2008
DWG NO
7-21C-045-DL-16
GASKET, CLIP ON
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
C
DJM
-
.003 BeCu 172
-
-
FINGER
PITCH
B
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
10-30CT
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
D
.005
.01
.1
QA APPROVAL
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
VARIABLE CLIP ON SERIES CHART
CLIP-ON SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.005" CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES
LANCE PITCH
A. PATTERN PITCH FOR 10-30CD
B. PATTERN PITCH FOR 10-30CT
C. PATTERN PITCH FOR 11-45CD
D. PATTERN PITCH FOR 11-45CT
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES LANCE PITCH
HOLE PITCH A
C
INSIDE
B
A
C
INSIDE
B
FINGER
PITCH
PATTERN PITCH=
4 FINGERS PITCHES LANCE PITCH
FINGER
PITCH
PATTERN PITCH=
7 FINGERS PITCHES
HOLE PITCH A
B
C
INSIDE LANCE PITCH
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
18
Copper Beryllium Fingerstock
Perpendicular Shielding Gaskets
• Finger design allows for continuous contact across the
length of the strip
• "D" lance provides superior retention of gasket to the
mounting surface
• 0.80 D-clip is retained with .100 D-hole
Perpendicular Electrical Grounding Strips
• Finger extension provides grounding from card or PCB to
a backplane housing surface
• Wide clip-on area with "D" lance offers reliable retention
• .0035 material offers significant resiliency
CPS | Clip-On
Black = inches Blue = mm
PART NUMBER A B C FINGER PITCH MATERIAL
THICK LENGTH FINGERS/
STRIP LANCE
25-55CPS-XX-16
0.25 6.35 0.55 13.97 0.04 1.02 0.220 5.59 0.250 6.35 0.004 0.102 16 406 64 D
CPG | Clip-On
Black = inches Blue = mm
PART NUMBER A B C FINGER PITCH MATERIAL
THICK LENGTH FINGERS/
STRIP LANCE
6-31CPG-XX-12
0.06 1.52 0.31 7.87 0.04 1.02 0.500 12.70 0.545 13.84 0.004 0.102 12 305 22 D
6-31CPG-XX-16
0.06 1.52 0.31 7.87 0.04 1.02 0.500 12.70 0.545 13.84 0.004 0.102 16 406 29 D
XX - Select material/finish (see page 6)
XX - Select material/finish (see page 6)
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 11/15/2007
DWG NO
25-55CPS
CLIP ON GASKET
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.004 BeCu ALLOY 172
H.T. TO DPH 383
FINGER
PITCH
B
A
C
INSIDE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 11/30/2007
DWG NO
6-31CPG
GASKET, CLIP-ON
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
P1
.0035 BeCu ALLOY 172
H.T. TO 373 DPH
FINGER
PITCH
B
C
INSIDE
A
CLIP-ON SERIES CONT.
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 11/15/2007
DWG NO
25-55CPS
CLIP ON GASKET
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.004 BeCu ALLOY 172
H.T. TO DPH 383
FINGER
PITCH B
A
C
INSIDE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 11/30/2007
DWG NO
6-31CPG
GASKET, CLIP-ON
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
P1
.0035 BeCu ALLOY 172
H.T. TO 373 DPH
FINGER
PITCH
B
C
INSIDE
A
ML | Gasket
Black = inches Blue = mm
PART NUMBER A B C FINGER PITCH MATERIAL
THICK FINGERS
14-18ML-XX-16
0.14 3.56 0.28 7.11 0.18 4.57 0.080 2.03 0.500 12.70 0.005 0.127 32
14-18ML-XX-24
0.14 3.56 0.28 7.11 0.18 4.57 0.080 2.03 0.500 12.70 0.005 0.127 48
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
14-18ML
GROUNDING GASKET
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.0045"CuBe C17200 1/4 H
-
HT TO FULL HARD
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
C
.056 TYP
B
A
PITCH .50 TYP
GROUNDING SERIES
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
14-18ML
GROUNDING GASKET
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.0045"CuBe C17200 1/4 H
-
HT TO FULL HARD
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
C
.056 TYP
B
A
PITCH .50 TYP
XX - Select material/finish (see page 6)
MOUNTING
OPTIONS
■ Tape
EMI Enclosure Shielding Solutions 19
Copper Beryllium Fingerstock
XX - Select material/finish (see page 6)
XX - Select material/finish (see page 6)
CONTACT SERIES
Contact gaskets are primarily used for grounding and
shielding in high frequency applications. These gaskets
provide engineers and designers with flexibility to solve
their shielding and grounding issues. They are available
in a variety of different lengths, widths and profiles.
Standard factory length for Contact Series strips is 16".
Individual contacts available in tape & reel packaging.
Adhesive tape is optional - please consult factory.
9-19UD 10-26UD 16-44UD | Contact Series
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MAT. THICK LENGTH FINGERS/STRIP TAPE
9-19UD-XX-16
0.09 2.29 0.19 4.83 0.11 2.79 0.13 3.30 0.040 1.02 0.060 1.52 0.004 0.102 16 406 266 NO
10-26UD-XX-16
0.11 2.79 0.26 6.60 0.17 4.32 0.22 5.59 0.050 1.27 0.075 1.90 0.006 0.152 16 406 213 NO
16-44UD-XX-16
0.16 4.06 0.44 11.18 0.24 6.10 0.33 8.38 0.062 1.57 0.093 2.36 0.010 0.254 16 406 172 NO
4-34D 4-38D 4-53D 9-78D 9-78D-A | Contact Series
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MATERIAL
THICK LENGTH FINGERS/
STRIP TAPE
4-34D-XX-16
0.04 1.02 0.34 8.63 0.29 7.37 0.13 3.30 0.040 1.02 0.060 1.52 0.004 0.102 16 406 266 NO
4-38D-XX-16
0.05 1.27 0.38 9.65 0.31 7.87 0.062 15.75 0.050 1.27 0.075 1.90 0.006 0.152 16 406 213 NO
4-53D-XX-16
0.05 1.27 0.53 13.46 0.47 11.94 0.22 5.59 0.050 1.27 0.075 1.90 0.006 0.152 16 406 213 NO
9-78D-XX-16
0.05 1.27 0.78 19.81 0.66 16.76 0.31 7.87 0.062 1.57 0.093 2.36 0.010 0.254 16 406 172 NO
9-78D-A-XX-16
0.09 2.29 0.78 19.81 0.66 16.76 0.31 7.87 0.062 1.57 0.093 2.36 0.010 0.254 16 406 172 NO
9-19UD 10-26UD 16-44UD
4-34D 4-38D 4-53D 9-78D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
5/5/2009
DWG NO
9-19UD-XX-16
FINGER STOCK, UD SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
DJM
-
.004 BeCu
FINGER
PITCH
B
A.05
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM 8/28/2008
DWG NO
10-26UD-XX-16
CONTACT SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.006 BeCu 172
FINGER
PITCH
B
A.07
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
7/18/2008
DWG NO
16-44UD-XX-16
FINGER STOCK, UD SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .010
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
C
M. Paul
-
.010 CuBe C17200 1/4 H
-
BRIGHT DIP
FINGER
PITCH
B
C
A
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM 8/28/2008
DWG NO
10-26UD-XX-16
CONTACT SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.006 BeCu 172
FINGER
PITCH
B
A.07
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
4-34D-XX-16
CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
-
-
.004 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
4-34D-XX-16
CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
-
-
.004 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG DWG NO
4-38D
CONTACT SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
-
-
.006 BeCu 172
-
-
BC
A
FINGER
PITCH
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG DWG NO
4-53D
CONTACT SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
-
-
.006 BeCu
-
FINISH
B
FINGER
PITCH
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM 8/28/2008
DWG NO
10-26UD-XX-16
CONTACT SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.006 BeCu 172
FINGER
PITCH
B
A.07
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG DWG NO
4-53D
CONTACT SERIES
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
-
-
.006 BeCu
-
FINISH
B
FINGER
PITCH
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
7/28/2008
DWG NO
9-78D-XX-16
9-78D FINGERSTOCK
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
M. Paul
-
.010 BeCu
-
FINISH
C
FINGER
PITCH
A
B
D
9-78D-A
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
7/29/2008
DWG NO
9-78D-A-XX-16
9-78D-A FINGERSTOCK
SIZE
CSCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
M. Paul
-
.010 BeCu
-
FINISH
FINGER
PITCH
BC
A
9°
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 11/15/2007
DWG NO
25-55CPS
CLIP ON GASKET
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.004 BeCu ALLOY 172
H.T. TO DPH 383
FINGER
PITCH B
A
C
INSIDE
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 11/30/2007
DWG NO
6-31CPG
GASKET, CLIP-ON
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
P1
.0035 BeCu ALLOY 172
H.T. TO 373 DPH
FINGER
PITCH
B
C
INSIDE
A
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
14-18ML
GROUNDING GASKET
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
.0045"CuBe C17200 1/4 H
-
HT TO FULL HARD
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
C
.056 TYP
B
A
PITCH .50 TYP
C
B
A
D
9˚
PITCH
FINGER
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
20
XX - Select material/finish (see page 6)
XX - Select material/finish (see page 6)
XX - Select material/finish (see page 6)
7-13U 13-28U 28-49U | Contact Series
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MAT. THICK LENGTH FINGERS/STRIP TAPE
7-13U-XX-16
0.07 1.78 0.13 3.30 0.07 1.78 0.09 2.29 0.040 1.02 0.060 1.52 0.004 0.102 16 406 266 NO
13-28U-XX-16
0.13 3.30 0.28 7.11 0.16 4.06 0.23 5.84 0.095 2.41 0.135 3.43 0.010 0.254 16 406 118 NO
28-49U-XX-16
0.28 7.11 0.49 12.45 0.34 8.64 0.38 9.65 0.125 3.17 0.187 4.75 0.006 0.152 16 406 85 NO
CONTACT SERIES CONT.
7-13U
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO 7-13U
U CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
-
-
.004 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
11-78R2 | Contact Series
Black = inches Blue = mm
PART NUMBER A B C FINGER PITCH MAT. THICK LENGTH FINGERS/STRIP TAPE
11-78R2-XX-16
0.13 3.30 0.78 19.81 0.20 5.08 0.140 3.56 0.187 4.75 0.005 0.127 16 406 86 NO
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
M. Paul 3/8/2008
DWG NO
11-78R2-XX-16
FINGER STOCK, CONTACT
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
-
4J674
B
.0045 BeCu 172
HEAT TREAT TO 373 DPH
FINGER
PITCH
B
A
C
11-90S | Contact Series
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MAT. THICK LENGTH FINGERS/
STRIP
11-90S-XX-16
0.11 2.79 0.90 22.86 0.66 16.76 0.38 9.65 0.125 3.17 0.172 4.37 0.010 0.254 16 406 93
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 1/28/2009
DWG NO
11-90S-SALES
11-90S, CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
M. Paul
-
.01 BeCu
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
A
B
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO 7-13U
U CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
-
-
.004 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO 7-13U
U CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
-
-
.004 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DJM 6/2/2010
DWG NO
13-28U-XX-16
U STYLE CONTACT SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
A
.010 BeCu ALLOY 25
FINGER
PITCH
A
B
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 6/2/2009
DWG NO
28-49U-XX-16
CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
B
DJM
-
.0063 CuBe C17200 1/4 HT
-
N/A
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
-
-
-
-
--
FINGER
PITCH
B
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
M. Paul 3/8/2008
DWG NO
11-78R2-XX-16
FINGER STOCK, CONTACT
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
-
4J674
B
.0045 BeCu 172
HEAT TREAT TO 373 DPH
FINGER
PITCH
B
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
M. Paul 3/8/2008
DWG NO
11-78R2-XX-16
FINGER STOCK, CONTACT
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
-
4J674
B
.0045 BeCu 172
HEAT TREAT TO 373 DPH
FINGER
PITCH
B
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 1/28/2009
DWG NO
11-90S-SALES
11-90S, CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
M. Paul
-
.01 BeCu
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
A
B
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 1/28/2009
DWG NO
11-90S-SALES
11-90S, CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
M. Paul
-
.01 BeCu
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
A
B
C
D
28-49U
13-28U
Copper Beryllium Fingerstock
EMI Enclosure Shielding Solutions 21
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO 7-13U
U CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
-
-
.004 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
C
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
M. Paul 3/8/2008
DWG NO
11-78R2-XX-16
FINGER STOCK, CONTACT
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
-
4J674
B
.0045 BeCu 172
HEAT TREAT TO 373 DPH
FINGER
PITCH
B
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 1/28/2009
DWG NO
11-90S-SALES
11-90S, CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
M. Paul
-
.01 BeCu
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
A
B
C
D
Copper Beryllium Fingerstock
XX - Select material/finish (see page 6)
XX - Select material/finish (see page 6)
XX - Select material/finish (see page 6)
XX - Select material/finish (see page 6)
XX - Select material/finish (see page 6)
CONTACT SERIES CONT.
12-75RS | Contact Series
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MAT. THICK LENGTH FINGERS/
STRIP TAPE
12-75RS-XX-16
0.12 3.05 0.75 19.05 0.12 3.05 0.65 16.51 0.140 3.56 0.187 4.75 0.005 0.127 16 406 85 YES
8-92RB | Contact Series
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MAT. THICK LENGTH FINGERS/
STRIP TAPE
8-92RB-XX-16
0.09 2.29 0.92 23.37 0.30 7.62 0.61 15.49 0.140 3.56 0.187 4.75 0.005 0.127 16 406 85 NO
8-92RC | Contact Series
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MAT. THICK LENGTH FINGERS/
STRIP TAPE
8-92RC-XX-16
0.09 2.29 0.92 23.37 0.30 7.62 0.63 16.00 0.140 3.56 0.187 4.75 0.005 0.127 16 406 85 NO
11-89RA | Contact Series
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MAT. THICK LENGTH FINGERS/
STRIP TAPE
11-89RA-XX-16
0.13 3.30 0.89 22.61 0.81 20.57 0.60 15.24 0.140 3.56 0.187 4.75 0.005 0.127 16 406 85 NO
22-77RR | Contact Series
Black = inches Blue = mm
PART NUMBER A B C D FINGER PITCH MAT. THICK LENGTH FINGERS/
STRIP TAPE
22-77RR-XX-16
0.23 5.84 0.77 19.56 0.64 16.26 0.62 15.75 0.140 3.56 0.187 4.75 0.005 0.127 16 406 85 NO
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 5/6/2009
DWG NO
12-75RS-XX-16
CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
DJM
-
.005 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
PSA TAPE
D
.200
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO 8-92RB
CONTACT R-SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
-
-
.0050 CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
FINGER
PITCH
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
22-77RR
GASKET CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
FINISH
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
D
B
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 5/6/2009
DWG NO
12-75RS-XX-16
CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
DJM
-
.005 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
PSA TAPE
D
.200
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO 8-92RB
CONTACT R-SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
-
-
.0050 CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
FINGER
PITCH
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
-
DWG NO
8-92RC
R, CONTACT SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
-
-
4J674
A
.005 BeCu ALLOY 172
BD (BRIGHT)
D
FINGER
PITCH
B
A
.06 C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 2/6/2008
DWG NO
11-89RA-XX-16
CONTACT, STYLE R
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.005 CuBe C17200 1/4 H
FINGER
PITCH
B
D
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING 5/6/2009
DWG NO
12-75RS-XX-16
CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
DJM
-
.005 BeCu 172
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
B
A
PSA TAPE
D
.200
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO 8-92RB
CONTACT R-SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
A
-
-
.0050 CuBe C17200 1/4 H
-
-
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
FINGER
PITCH
D
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
-
DWG NO
8-92RC
R, CONTACT SERIES
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
-
-
4J674
A
.005 BeCu ALLOY 172
BD (BRIGHT)
D
FINGER
PITCH
B
A
.06 C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
QA
ENG
DVG 2/6/2008
DWG NO
11-89RA-XX-16
CONTACT, STYLE R
SIZE
C
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX .005
.XX .01
.X .1 ANGLES 2
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUST. NAME
4J674
B
.005 CuBe C17200 1/4 H
FINGER
PITCH
B
D
A
C
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
22-77RR
GASKET CONTACT SERIES
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
-
CuBe C17200 1/4 H
-
FINISH
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
-
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
FINGER
PITCH
DB
A
C
PITCH
FINGER
D
PITCH
FINGER
D
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
22
Metal Shielding Gaskets
XX - Denotes the availability of finish/plating options. See chart above. Example: 09D-110-BD SS - Denotes stainless steel.
D-Sub Miniature - Solid
Black = inches Blue = mm
PART NUMBER TYPE A B C D E F G H
09D-110-XX
9 Pin 1.41 35.81 0.98 24.89 0.78 19.81 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
09D-100-SS
9 Pin 1.41 35.81 0.98 24.89 0.78 19.81 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
15D-110-XX
15 Pin 1.74 44.20 1.31 33.27 1.11 28.19 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
15D-100-SS
15 Pin 1.74 44.20 1.31 33.27 1.11 28.19 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
25D-110-XX
25 Pin 2.28 57.91 1.85 46.99 1.65 41.91 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
25D-100-SS
25 Pin 2.28 57.91 1.85 46.99 1.65 41.91 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
37D-110-XX
37 Pin 2.93 74.42 2.50 63.50 2.29 58.17 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
37D-100-SS
37 Pin 2.93 74.42 2.50 63.50 2.29 58.17 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
50D-110-XX
50 Pin 2.84 72.14 2.41 61.21 2.11 53.59 0.55 13.97 0.28 7.11 0.80 20.32 0.025 0.63 0.24 6.10
50D-100-SS
50 Pin 2.84 72.14 2.41 61.21 2.11 53.59 0.55 13.97 0.28 7.11 0.80 20.32 0.025 0.63 0.24 6.10
D-Sub Miniature - Slotted
Black = inches Blue = mm
PART NUMBER TYPE A B C D E F G H
09D-210-XX
9 Pin 1.41 35.81 0.98 24.89 0.78 19.81 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
09D-200-SS
9 Pin 1.41 35.81 0.98 24.89 0.78 19.81 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
15D-210-XX
15 Pin 1.74 44.20 1.31 33.27 1.11 28.19 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
15D-200-SS
15 Pin 1.74 44.20 1.31 33.27 1.11 28.19 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
25D-210-XX
25 Pin 2.28 57.91 1.85 46.99 1.65 41.91 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
25D-200-SS
25 Pin 2.28 57.91 1.85 46.99 1.65 41.91 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
37D-210-XX
37 Pin 2.93 74.42 2.50 63.50 2.29 58.17 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
37D-200-SS
37 Pin 2.93 74.42 2.50 63.50 2.29 58.17 0.44 11.18 0.22 5.59 0.69 17.53 0.025 0.63 0.13 3.30
50D-210-XX
50 Pin 2.84 72.14 2.41 61.21 2.11 53.59 0.55 13.97 0.28 7.11 0.80 20.32 0.025 0.63 0.24 6.10
50D-200-SS
50 Pin 2.84 72.14 2.41 61.21 2.11 53.59 0.55 13.97 0.28 7.11 0.80 20.32 0.025 0.63 0.24 6.10
METAL D-SUBS
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
PPD-1X0-XX
SOLID D-SUB CONNECTOR
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
CUSTOMER NUMBER 1
PER P/N, .004" THICK
CUSTOMER NAME
PER P/N
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUSTOMER NUMBER 2
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
H
2X FULL R
E
D F
20° TYP
G
R.0504X
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
PPD-1X0-XX
SOLID D-SUB CONNECTOR
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
CUSTOMER NUMBER 1
PER P/N, .004" THICK
CUSTOMER NAME
PER P/N
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUSTOMER NUMBER 2
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
H
2X FULL R
E
D F
20° TYP
G
R.0504X
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
PPD-2X0-XX
SLOTTED D-SUB CONNECTOR
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
CUSTOMER NUMBER 1
PER P/N, .004" THICK
CUSTOMER NAME
PER P/N
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUSTOMER NUMBER 2
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
D F
E
.025 TYP
H
2X FULL R
R.054X
G
20° TYP
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
PPD-2X0-XX
SLOTTED D-SUB CONNECTOR
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
CUSTOMER NUMBER 1
PER P/N, .004" THICK
CUSTOMER NAME
PER P/N
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUSTOMER NUMBER 2
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
D F
E
.025 TYP
H
2X FULL R
R.054X
G
20° TYP
4X R .050
C
H
D
F
A
B
E
2X FULL R
G
20° TYP
*: "XX" DENOTES THE AVAILABILITY OF FINISH/PLATING OPTIONS. SEE CHART.
STAINLESS STEEL
PART NUMBER
TYPE
A
B
C
D
E
F
G
H
09D-100-SS
9 PIN
1.41 .98 .78 .44 .22 .69 .025 .13
15D-100-SS
15 PIN
1.74 1.31 1.11 .44 .22 .69 .025 .13
25D-100-SS
25 PIN
2.28 1.85 1.65 .44 .22 .69 .025 .13
37D-100-SS
37 PIN
2.93 2.50 2.29 .44 .22 .69 .025 .13
50D-100-SS
50 PIN
2.84 2.41 2.11 .55 .28 .80 .025 .24
COPPER BERYLLIUM
PART NUMBER*
TYPE
A
B
C
D
E
F
G
H
09D-110-XX
9 PIN
1.41 .98 .78 .44 .22 .69 .025 .13
15D-110-XX
15 PIN
1.74 1.31 1.11 .44 .22 .69 .025 .13
25D-110-XX
25 PIN
2.28 1.85 1.65 .44 .22 .69 .025 .13
37D-110-XX
37 PIN
2.93 2.50 2.29 .44 .22 .69 .025 .13
50D-110-XX
50 PIN
2.84 2.41 2.11 .55 .28 .80 .025 .24
STANDARD FINISH AND PLATING OPTIONS*
FINISH TYPE
SPECIFICATIONS
LEADER TECH FINISH CODE
BRIGHT FINISH
-
BD (STANDARD)
BRIGHT TIN
MIL-T-10727 / ASTM B 545
SN
SATIN/MATTE TIN
MIL-T-10727 / ASTM B 545
ST
ELECTROLESS BRIGHT NICKEL ROHS
AMS 2404 / ASTM B 733
NI
D
C
B
A
B
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
CUST. DWG. NO. 2
MFG APPR.
FSCM NO.
THIS DOCUMENT CONTAINS
PROPRIETARY INFORMATION OWNED BY
LEADERTECH, OR DEVELOPED AT IT'S
OWN PRIVATE EXPENSE, AND MAY NOT
BE USED, DUPLICATED OR DISCLOSED IN
WHOLE OR IN PART FOR ANY PURPOSE
INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN
PERMISSION OF LEADERTECH.
LEADERTECH DOES NOT GUARANTEE
OR WARRANTY THE PERFORMANCE
CHARACTERISTICS.
MATERIAL SPEC
FINISH
CUST. NAME
ENGINEERING APPR.
TITLE
SIZE
DWG. NO.
REV
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES:
SHEET 1 OF 1
A
SCALE: 4:1
B
.XXX +/- .005
.XX +/- .01
.X +/- .1 ANGLES +/- 2 DEG
PREPARED
PN AND PLATING OPTIONS
CUST. DWG. NO.
-
4J674
A
PER P/N
PER P/N, .004" THICK
-
-
SOLID D-SUB CONNECTOR
CUSTOMER APPR.
4X R .050
C
H
D
F
A
.025 TYP
B
E
2X FULL R
G
20° TYP
*: "XX" DENOTES THE AVAILABILITY OF FINISH/PLATING OPTIONS. SEE CHART.
STAINLESS STEEL
PART NUMBER
TYPE
A
B
C
D
E
F
G
H
09D-200-SS
9 PIN
1.41 .98 .78 .44 .22 .69 .025 .13
15D-200-SS
15 PIN
1.74 1.31 1.11 .44 .22 .69 .025 .13
25D-200-SS
25 PIN
2.28 1.85 1.65 .44 .22 .69 .025 .13
37D-200-SS
37 PIN
2.93 2.50 2.29 .44 .22 .69 .025 .13
50D-200-SS
50 PIN
2.84 2.41 2.11 .55 .28 .80 .025 .24
COPPER BERYLLIUM
PART NUMBER*
TYPE
A
B
C
D
E
F
G
H
09D-210-XX
9 PIN
1.41 .98 .78 .44 .22 .69 .025 .13
15D-210-XX
15 PIN
1.74 1.31 1.11 .44 .22 .69 .025 .13
25D-210-XX
25 PIN
2.28 1.85 1.65 .44 .22 .69 .025 .13
37D-210-XX
37 PIN
2.93 2.50 2.29 .44 .22 .69 .025 .13
50D-210-XX
50 PIN
2.84 2.41 2.11 .55 .28 .80 .025 .24
STANDARD FINISH AND PLATING OPTIONS*
FINISH TYPE
SPECIFICATIONS
LEADER TECH FINISH CODE
BRIGHT FINISH
-
BD (STANDARD)
BRIGHT TIN
MIL-T-10727 / ASTM B 545
SN
SATIN/MATTE TIN
MIL-T-10727 / ASTM B 545
ST
ELECTROLESS BRIGHT NICKEL ROHS
AMS 2404 / ASTM B 733
NI
D
C
B
A
B
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
CUST. DWG. NO. 2
MFG APPR.
FSCM NO.
THIS DOCUMENT CONTAINS
PROPRIETARY INFORMATION OWNED BY
LEADERTECH, OR DEVELOPED AT IT'S
OWN PRIVATE EXPENSE, AND MAY NOT
BE USED, DUPLICATED OR DISCLOSED IN
WHOLE OR IN PART FOR ANY PURPOSE
INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN
PERMISSION OF LEADERTECH.
LEADERTECH DOES NOT GUARANTEE
OR WARRANTY THE PERFORMANCE
CHARACTERISTICS.
MATERIAL SPEC
FINISH
CUST. NAME
ENGINEERING APPR.
TITLE
SIZE
DWG. NO.
REV
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES:
SHEET 1 OF 1
A
SCALE: 4:1
B
.XXX +/- .005
.XX +/- .01
.X +/- .1 ANGLES +/- 2 DEG
PREPARED
PN AND PLATING OPTIONS
CUST. DWG. NO.
-
4J674
A
PER P/N
PER P/N, .004" THICK
-
-
SLOTTED D-SUB CONNECTOR
CUSTOMER APPR.
4X R .050
C
H
D
F
A
.025 TYP
B
E
2X FULL R
G
20° TYP
*: "XX" DENOTES THE AVAILABILITY OF FINISH/PLATING OPTIONS. SEE CHART.
STAINLESS STEEL
PART NUMBER
TYPE
A
B
C
D
E
F
G
H
09D-200-SS
9 PIN
1.41 .98 .78 .44 .22 .69 .025 .13
15D-200-SS
15 PIN
1.74 1.31 1.11 .44 .22 .69 .025 .13
25D-200-SS
25 PIN
2.28 1.85 1.65 .44 .22 .69 .025 .13
37D-200-SS
37 PIN
2.93 2.50 2.29 .44 .22 .69 .025 .13
50D-200-SS
50 PIN
2.84 2.41 2.11 .55 .28 .80 .025 .24
COPPER BERYLLIUM
PART NUMBER*
TYPE
A
B
C
D
E
F
G
H
09D-210-XX
9 PIN
1.41 .98 .78 .44 .22 .69 .025 .13
15D-210-XX
15 PIN
1.74 1.31 1.11 .44 .22 .69 .025 .13
25D-210-XX
25 PIN
2.28 1.85 1.65 .44 .22 .69 .025 .13
37D-210-XX
37 PIN
2.93 2.50 2.29 .44 .22 .69 .025 .13
50D-210-XX
50 PIN
2.84 2.41 2.11 .55 .28 .80 .025 .24
STANDARD FINISH AND PLATING OPTIONS*
FINISH TYPE
SPECIFICATIONS
LEADER TECH FINISH CODE
BRIGHT FINISH
-
BD (STANDARD)
BRIGHT TIN
MIL-T-10727 / ASTM B 545
SN
SATIN/MATTE TIN
MIL-T-10727 / ASTM B 545
ST
ELECTROLESS BRIGHT NICKEL ROHS
AMS 2404 / ASTM B 733
NI
D
C
B
A
B
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
CUST. DWG. NO. 2
MFG APPR.
FSCM NO.
THIS DOCUMENT CONTAINS
PROPRIETARY INFORMATION OWNED BY
LEADERTECH, OR DEVELOPED AT IT'S
OWN PRIVATE EXPENSE, AND MAY NOT
BE USED, DUPLICATED OR DISCLOSED IN
WHOLE OR IN PART FOR ANY PURPOSE
INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN
PERMISSION OF LEADERTECH.
LEADERTECH DOES NOT GUARANTEE
OR WARRANTY THE PERFORMANCE
CHARACTERISTICS.
MATERIAL SPEC
FINISH
CUST. NAME
ENGINEERING APPR.
TITLE
SIZE
DWG. NO.
REV
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES:
SHEET 1 OF 1
A
SCALE: 4:1
B
.XXX +/- .005
.XX +/- .01
.X +/- .1 ANGLES +/- 2 DEG
PREPARED
PN AND PLATING OPTIONS
CUST. DWG. NO.
-
4J674
A
PER P/N
PER P/N, .004" THICK
-
-
SLOTTED D-SUB CONNECTOR
CUSTOMER APPR.
4X R .050
C
H
D
F
A
B
E
2X FULL R
G
20° TYP
*: "XX" DENOTES THE AVAILABILITY OF FINISH/PLATING OPTIONS. SEE CHART.
STAINLESS STEEL
PART NUMBER
TYPE
A
B
C
D
E
F
G
H
09D-100-SS
9 PIN
1.41 .98 .78 .44 .22 .69 .025 .13
15D-100-SS
15 PIN
1.74 1.31 1.11 .44 .22 .69 .025 .13
25D-100-SS
25 PIN
2.28 1.85 1.65 .44 .22 .69 .025 .13
37D-100-SS
37 PIN
2.93 2.50 2.29 .44 .22 .69 .025 .13
50D-100-SS
50 PIN
2.84 2.41 2.11 .55 .28 .80 .025 .24
COPPER BERYLLIUM
PART NUMBER*
TYPE
A
B
C
D
E
F
G
H
09D-110-XX
9 PIN
1.41 .98 .78 .44 .22 .69 .025 .13
15D-110-XX
15 PIN
1.74 1.31 1.11 .44 .22 .69 .025 .13
25D-110-XX
25 PIN
2.28 1.85 1.65 .44 .22 .69 .025 .13
37D-110-XX
37 PIN
2.93 2.50 2.29 .44 .22 .69 .025 .13
50D-110-XX
50 PIN
2.84 2.41 2.11 .55 .28 .80 .025 .24
STANDARD FINISH AND PLATING OPTIONS*
FINISH TYPE
SPECIFICATIONS
LEADER TECH FINISH CODE
BRIGHT FINISH
-
BD (STANDARD)
BRIGHT TIN
MIL-T-10727 / ASTM B 545
SN
SATIN/MATTE TIN
MIL-T-10727 / ASTM B 545
ST
ELECTROLESS BRIGHT NICKEL ROHS
AMS 2404 / ASTM B 733
NI
D
C
B
A
B
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
CUST. DWG. NO. 2
MFG APPR.
FSCM NO.
THIS DOCUMENT CONTAINS
PROPRIETARY INFORMATION OWNED BY
LEADERTECH, OR DEVELOPED AT IT'S
OWN PRIVATE EXPENSE, AND MAY NOT
BE USED, DUPLICATED OR DISCLOSED IN
WHOLE OR IN PART FOR ANY PURPOSE
INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN
PERMISSION OF LEADERTECH.
LEADERTECH DOES NOT GUARANTEE
OR WARRANTY THE PERFORMANCE
CHARACTERISTICS.
MATERIAL SPEC
FINISH
CUST. NAME
ENGINEERING APPR.
TITLE
SIZE
DWG. NO.
REV
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES:
SHEET 1 OF 1
A
SCALE: 4:1
B
.XXX +/- .005
.XX +/- .01
.X +/- .1 ANGLES +/- 2 DEG
PREPARED
PN AND PLATING OPTIONS
CUST. DWG. NO.
-
4J674
A
PER P/N
PER P/N, .004" THICK
-
-
SOLID D-SUB CONNECTOR
CUSTOMER APPR.
XX - Denotes the availability of finish/plating options. See chart above. Example: 09D-210-BD SS - Denotes stainless steel.
Standard Finish and Plating Options
FINISH TYPE SPECIFICATIONS LEADER TECH FINISH CODE
BRIGHT FINISH
As Heat Treated BD (Standard)
BRIGHT TIN
ASTM B-545 SN
SATIN TIN/MATTE TIN
ASTM B-545 ST
ELECTROLESS BRIGHT NICKEL ROHS
ASTM B 733 NI
* For fabric option - See page 34.
EMI Enclosure Shielding Solutions 23
For over 30 years, Leader Tech has been supplying customers with high quality precision custom
prototypes, short run and high volume stampings. Our in-house tool & die design and build expertise,
combined with our extensive manufacturing capabilities, allow us to manufacture custom precision
components for many applications. Our expertise is not limited to just the stamping portion of the
application but can include value added operations such as the addition of insulating materials, hardware
and other required features. From prototype to high volume production runs, Leader Tech can meet your
custom needs with the shortest and most reliable lead times in the industry.
From prototypes within days to long production runs, your Leader Tech Team is ready to assist you.
Please call us at 813-855-6921 or email us at sales@leadertechinc.com with your requirements.
THIN GAUGE CUSTOM MECHANICAL SPRINGS & STAMPINGS
Precision Metal Stampings
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
PPD-1X0-XX
SOLID D-SUB CONNECTOR
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
CUSTOMER NUMBER 1
PER P/N, .004" THICK
CUSTOMER NAME
PER P/N
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUSTOMER NUMBER 2
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
H
2X FULL R
E
D F
20° TYP
G
R.0504X
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
PPD-1X0-XX
SOLID D-SUB CONNECTOR
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
CUSTOMER NUMBER 1
PER P/N, .004" THICK
CUSTOMER NAME
PER P/N
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUSTOMER NUMBER 2
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
H
2X FULL R
E
D F
20° TYP
G
R.0504X
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
PPD-2X0-XX
SLOTTED D-SUB CONNECTOR
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
CUSTOMER NUMBER 1
PER P/N, .004" THICK
CUSTOMER NAME
PER P/N
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUSTOMER NUMBER 2
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
D F
E
.025 TYP
H
2X FULL R
R.054X
G
20° TYP
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 1
PREPARED
MFG APPROVAL
ENGINEERING
DWG NO
PPD-2X0-XX
SLOTTED D-SUB CONNECTOR
SIZE
SCALE
REV
FSCM NO.
DATE
MATERIAL SPEC
FINISH
CUSTOMER DWG NO.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
.XXX ±
.XX
.X ±ANGLES
CUST. NAME
4J674
P1
CUSTOMER NUMBER 1
PER P/N, .004" THICK
CUSTOMER NAME
PER P/N
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN
PRIVATE EXPENSE, AND MAY NOT USED,
DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR
ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR
PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF
LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR
WARRANTY THE PERFORMANCE CHARACTERISTICS.
CUSTOMER NUMBER 2
CUSTOMER DWG NO.#2
C
.005
.01
.1
QA APPROVAL
A
B
C
D F
E
.025 TYP
H
2X FULL R
R.054X
G
20° TYP
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
24
Extrusions
Rectangle
Round
Hollow Round
Solid D
Hollow D
Hollow P
U Channel
CONDUCTIVE ELASTOMER EMI SHIELDING GASKETS FOR ELECTRONIC ENCLOSURES
The Only MIL-SPEC Approved & Certified Manufacturer
of All 12 Conductive Elastomer Compounds!
Leader Tech’s complete line of TechSIL Conductive Elastomer compounds is QPL certification by the Defense Logistics
Agency. This unrivaled commitment to excellence distinguishes our company as the only MIL-SPEC approved &
certified manufacturer of all 12 conductive elastomer formulations. This prestigious designation authorizes us to
formulate, extrude and mold conductive elastomers to stringent MIL-DTL-83528D specifications.
Leader Tech’s high-performance TechSIL gaskets are manufactured using proprietary base formulations of silicone,
fluorosilicone and EPDM rubber that are embedded with highly conductive fillers including: Silver, Silver/Copper, Silver/
Aluminum, Silver/Nickel, Silver/Glass, and Nickel Coated Graphite. We offer numerous standard gasket profiles as well
as unlimited variations of extruded, molded, sheet stock, and die-cut finishes.
TechSIL Conductive Elastomers provide engineers with a highly customizable gasketing solution that delivers a
shielding effectiveness of up to 110 dB across wide temperature variations and environmental conditions. An onsite
applications engineer is also available to help formulate materials to meet your custom requirements. To learn more
about this product line and our capabilities, make sure to request or download the complete TechSIL Conductive
Elastomer catalog from our website.
Get your catalog today!
Download from our website.
Sheet Material Molded
O-Rings
O-Rings
D Cross Section
Rectangle
D Cross Section
Rectangle
O Cross Section
Waveguide A
Waveguide B
Die Cut
Flange Mount
Flat Circular Washer
Specials
MATERIAL TYPES & PROFILES
Elastomer
MIL-DTL-83528 Approved
EMI Enclosure Shielding Solutions 25
CONDUCTIVE ELASTOMER EMI SHIELDING GASKETS FOR ELECTRONIC ENCLOSURES
Leader Tech’s TechSIL 8000 Oriented Wire gasketing is designed for
use in suppressing EMI/RFI up to 100 dB in the E-Field/up to 50 dB in
the H-Field, while offering an effective environmental seal between
mating surfaces. This material is comprised of monel or aluminum
wire oriented perpendicular to the mating surfaces and embedded
in solid or sponge silicone elastomer. The wires are crimped for
additional resiliency and to optimize the mechanical performance
of the gasket. The silicone based TechSIL has 700-900 wires per sq./
in. and is capable of withstanding temperatures from -80° to a
maximum of 500° F (-62° to 260°C). TechSIL Oriented Wire materials
are available in strip or sheet form and can easily be die cut into
complex shapes or fabricated into custom frame gaskets. All TechSIL
8000 materials meet the DESC drawing 90046.
H
W
All materials available with tape.
The data presented is accurate and true to our knowledge. Since applications, test
methods and test procedures may vary, we recommend that users perform their own
tests to assure suitability for specific applications. We offer no product warranty, either
expressed or implied, except we will replace any product found to be defective.
H
W
ORIENTED WIRE SERIES
*0.032" thickness is only available in Silicone Solid
TechSIL® | Sheet
PART NUMBER HEIGHT WIDTH
8100-0005-XX
0.032* 0.81 3.00 76.20
8100-0010-XX
0.032* 0.81 4.50 114.30
8100-0015-XX
0.032* 0.81 6.00 152.40
8100-0020-XX
0.062 1.57 3.00 76.20
8100-0025-XX
0.062 1.57 4.50 114.30
8100-0030-XX
0.062 1.57 6.00 152.40
8100-0035-XX
0.093 2.36 3.00 76.20
8100-0040-XX
0.093 2.36 4.50 114.30
8100-0045-XX
0.093 2.36 6.00 152.40
8100-0050-XX
0.125 3.18 3.00 76.20
8100-0055-XX
0.125 3.18 4.50 114.30
8100-0060-XX
0.125 3.18 6.00 152.40
8100-0065-XX
0.188 4.78 3.00 76.20
8100-0070-XX
0.188 4.78 4.50 114.30
8100-0075-XX
0.188 4.78 6.00 152.40
8100-0080-XX
0.250 6.35 3.00 76.20
8100-0085-XX
0.250 6.35 4.50 114.30
8100-0090-XX
0.250 6.35 6.00 152.40
Black = inches
Blue = mm
TechSIL® | Strip
PART NUMBER HEIGHT WIDTH
8200-0005-XX
0.062 1.57 0.093 2.36
8200-0010-XX
0.062 1.57 0.125 3.18
8200-0015-XX
0.062 1.57 0.188 4.78
8200-0020-XX
0.062 1.57 0.250 6.35
8200-0025-XX
0.062 1.57 0.375 9.53
8200-0030-XX
0.062 1.57 0.500 12.70
8200-0035-XX
0.093 2.36 0.093 2.36
8200-0040-XX
0.093 2.36 0.125 3.18
8200-0045-XX
0.093 2.36 0.188 4.78
8200-0050-XX
0.093 2.36 0.250 6.35
8200-0055-XX
0.093 2.36 0.375 9.53
8200-0060-XX
0.093 2.36 0.500 12.70
8200-0065-XX
0.125 3.18 0.125 3.18
8200-0070-XX
0.125 3.18 0.188 4.78
8200-0075-XX
0.125 3.18 0.250 6.35
8200-0080-XX
0.125 3.18 0.375 9.53
8200-0085-XX
0.125 3.18 0.500 12.70
8200-0090-XX
0.188 4.78 0.188 4.78
8200-0095-XX
0.188 4.78 0.250 6.35
8200-0100-XX
0.188 4.78 0.375 9.53
8200-0105-XX
0.188 4.78 0.500 12.70
8200-0110-XX
0.250 6.35 0.250 6.35
8200-0115-XX
0.250 6.35 0.375 9.53
8200-0120-XX
0.250 6.35 0.500 12.70
Black = inches
Blue = mm
Material Code Wire
Specification Elastomer
-81
Monel Wire - 0.0045 Dia. (0.10)
Per QQ-N-281 Silicone Sponge
Per AMS 3195
-82
Monel Wire - 0.0045 Dia. (0.10)
Per QQ-N-281 Silicone Solid
ZZR765, Class 2B, Grade 40
-83
Aluminum Wire - 0.005 Dia.
(0.13) Alloy 5056 Silicone Sponge
Per AMS 3195
-84
Aluminum Wire - 0.005 Dia.
(0.13) Alloy 5056 Silicone Solid
ZZR765, Class 2B, Grade 40
Part Number Example
8XXX - 9XXX - XX
Profile Style
9 if tape required
Assigned by Leader Tech Material Code
Elastomer
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
26
Leader Tech’s TechMESH Knitted Wire gaskets are designed to provide
EMI/RFI Shielding of joints and seams of electronic enclosures. The
unique construction of the TechMESH Knitted Wire consists of many
interlocking loops that act as small springs which provide for a resilient
all-metal conductive gasket with high attenuation characteristics.
TechMESH provides shielding effectiveness up to 130 dB in the E-Field
and up to 80 dB in the H-Field. The standard wire materials are Tin
Plated Copper Clad Steel, Monel and Aluminum in cross-sections
of rectangular, round, round-with-fin, and double-round-with-fin. All
cross-sections are available in both ALL Mesh or Elastomer Core
configurations. The TechMESH Knitted Wire gaskets are supplied on
spools of 25 ft. or cut to our customers specification.
Additional wire options are available upon request
W
D
D
W
W
H
H
D
Knitted Wire Series
TECHMESH KNITTED WIRE
Round | All Mesh
PART NUMBER DIAMETER
7000-0005-XX
0.062 1.57
7000-0010-XX
0.093 2.36
7000-0015-XX
0.125 3.18
7000-0020-XX
0.156 3.96
7000-0025-XX
0.188 4.78
7000-0030-XX
0.250 6.35
7000-0035-XX
0.312 7.92
7000-0040-XX
0.375 9.53
7000-0055-XX
0.500 12.70
Black = inches
Blue = mm
Round | All Mesh with Fin
PART NUMBER DIAMETER WIDTH
7100-0005-XX
0.062 1.57 0.375 9.53
7100-0010-XX
0.062 1.57 0.500 12.70
7100-0015-XX
0.093 2.36 0.375 9.53
7100-0020-XX
0.093 2.36 0.500 12.70
7100-0025-XX
0.125 3.18 0.375 9.53
7100-0030-XX
0.125 3.18 0.500 12.70
7100-0035-XX
0.188 4.78 0.500 12.70
7100-0040-XX
0.188 4.78 0.750 19.05
7100-0045-XX
0.250 6.35 0.500 12.70
7100-0050-XX
0.250 6.35 0.750 19.05
7100-0055-XX
0.312 7.92 0.875 22.23
7100-0060-XX
0.375 9.53 0.750 19.05
7100-0065-XX
0.500 12.70 0.750 19.05
Black = inches
Blue = mm
Rectangular | All Mesh
PART NUMBER HEIGHT WIDTH
7200-0005-XX
0.062 1.57 0.062 1.57
7200-0010-XX
0.062 1.57 0.125 3.18
7200-0015-XX
0.062 1.57 0.250 6.35
7200-0020-XX
0.093 2.36 0.093 2.36
7200-0025-XX
0.093 2.36 0.125 3.18
7200-0030-XX
0.093 2.36 0.250 6.35
7200-0035-XX
0.125 3.18 0.125 3.18
7200-0040-XX
0.125 3.18 0.250 6.35
7200-0045-XX
0.125 3.18 0.500 12.70
7200-0050-XX
0.188 4.78 0.188 4.78
7200-0055-XX
0.188 4.78 0.500 12.70
7200-0060-XX
0.250 6.35 0.250 6.35
7200-0065-XX
0.250 6.35 0.500 12.70
Double Round
| All Mesh with Fin
PART NUMBER DIAMETER WIDTH
7300-0005-XX
0.062 1.57 0.38 9.65
7300-0010-XX
0.062 1.57 0.50 12.70
7300-0015-XX
0.062 1.57 0.75 19.05
7300-0020-XX
0.093 2.36 0.50 12.70
7300-0025-XX
0.125 3.18 0.50 12.70
7300-0030-XX
0.125 3.18 0.75 19.05
7300-0035-XX
0.125 3.18 1.00 25.40
7300-0040-XX
0.188 4.78 0.63 16.00
7300-0045-XX
0.188 4.78 0.75 19.05
7300-0050-XX
0.188 4.78 1.00 25.40
7300-0055-XX
0.250 6.35 0.75 19.05
7300-0060-XX
0.250 6.35 1.00 25.40
7300-0065-XX
0.375 9.53 1.00 25.40
Part Number Example
7XXX - 9XXX - XX
Profile Style
9 if tape required
Assigned by Leader Tech Material Code
Material Code Wire Specification
-71 Tin Plated Copper Clad Steel - 0.0045 Dia. (0.10) ASTM-B-520
-72 Monel Wire - 0.0045 Dia. (0.10) Per QQ-N-281
-73 Aluminum Wire - 0.005 Dia. (0.13) Alloy 5056, Per AMS-4182
Black = inches
Blue = mm
Black = inches
Blue = mm
Tape is not available.
Tape is not available.
Tape is not available.
EMI Enclosure Shielding Solutions 27
D
D
H
W
Solid | Elastomer Mesh
PART NUMBER DIAMETER
7400-0005-XX
0.062 1.57
7400-0010-XX
0.125 3.18
7400-0015-XX
0.188 4.78
7400-0020-XX
0.250 6.35
7400-0025-XX
0.312 7.92
7400-0030-XX
0.375 9.53
7400-0035-XX
0.500 12.70
Hollow | Elastomer Mesh
PART NUMBER DIAMETER
7600-0005-XX
0.188 4.78
7600-0010-XX
0.250 6.35
7600-0015-XX
0.375 9.53
7600-0020-XX
0.500 12.70
Rectangular | Elastomer Mesh
PART NUMBER HEIGHT WIDTH
7500-0005-XX
0.125 3.18 0.125 3.18
7500-0010-XX
0.125 3.18 0.188 4.78
7500-0015-XX
0.125 3.18 0.250 6.35
7500-0020-XX
0.188 4.78 0.188 4.78
7500-0025-XX
0.250 6.35 0.250 6.35
7500-0030-XX
0.250 6.35 0.375 9.53
7500-0035-XX
0.250 6.35 0.500 12.70
7500-0040-XX
0.375 9.53 0.500 12.70
7500-0045-XX
0.500 12.70 0.500 12.70
7500-0050-XX
0.500 12.70 0.750 19.05
P-Bulb | Elastomer Mesh
PART NUMBER DIAMETER WIDTH
7700-0005-XX
0.125 3.18 0.500 12.70
7700-0010-XX
0.125 3.18 0.625 15.88
7700-0015-XX
0.125 3.18 0.750 19.05
7700-0020-XX
0.188 4.78 0.500 12.70
7700-0025-XX
0.188 4.78 0.625 15.88
7700-0030-XX
0.188 4.78 0.750 19.05
7700-0035-XX
0.250 6.35 0.500 12.70
7700-0040-XX
0.250 6.35 0.750 19.05
7700-0045-XX
0.250 6.35 1.000 25.40
7700-0050-XX
0.500 12.70 1.000 25.40
Part Number Example
7XXX - 9XXX - XX
Mesh Style
9 if tape required
Assigned by Leader Tech Material Code
Knitted Wire Series
TECHMESH ELASTOMER CORE WIRE
Material Code Wire
Specification Elastomer
-74 Monel Wire - 0.0045 Dia. (0.10)
Per QQ-N-281B Neoprene Sponge
MIL-R-6130B, Type II, Grade A
-75 Monel Wire - 0.0045 Dia. (0.10)
Per QQ-N-281B Silicone Sponge
Per AMS 3195
-76 Monel Wire - 0.0045 Dia. (0.10)
Per QQ-N-281B
Silicone Solid
Per ZZR765, Class 2B,
Grade 40
-77 Tin Plated Copper Clad Steel
0.0045 Dia. (0.10) ASTM-B-520 Neoprene Sponge
MIL-R-6130B, Type II, Grade A
-78 Tin Plated Copper Clad Steel
0.0045 Dia. (0.10) ASTM-B-520 Silicone Sponge
Per AMS 3195
-79 Tin Plated Copper Clad Steel
0.0045 Dia. (0.10) ASTM-B-520
Silicone Solid
Per ZZR765, Class 2B,
Grade 40
Black = inches
Blue = mm
Black = inches
Blue = mm
Black = inches
Blue = mm
Black = inches
Blue = mm
D
W
Tape is not available.
Tape is not available.
Not available in -75 or -78 material
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
28
Leader Tech’s TechMesh Combo Strip & Gaskets are designed for
use in applications requiring EMI/RFI shielding and environmental
sealing. These materials are comprised of monel or tin plated copper
clad steel knitted wire mesh which are bonded to neoprene sponge,
silicone sponge or silicone solid elastomer strips. The wire mesh provides
shielding performance up to 125 dB in the E-Field and up to 80 dB in
the H-Field while the elastomer materials can withstand temperatures
from -103° to a maximum of 500° F (-75° to 260°C). These materials
have an optional pressure sensitive adhesive backing for ease of
installation. The TechMesh Combo Strip & Gaskets are available in
standard and custom strip configurations. Leader Tech can also
fabricate custom frame gaskets to customers specification.
The data presented is accurate and true to our knowledge. Since applications, test methods and test procedures may vary, we recommend
that users perform their own tests to assure suitability for specific applications. We offer no product warranty, either expressed or implied,
except we will replace any product found to be defective.
Additional wire options or metal compression stops are available upon request.
A
B
C
D
KNIT WIRE
SHIELDING
ELASTOMER
Single | Mesh Combo Gasket
PART NUMBER ELASTOMER MESH
HEIGHT (A) WIDTH (B) HEIGHT (C) WIDTH (D)
7800-0005-XX
0.062 1.57 0.250 6.35 0.062 1.57 0.125 3.18
7800-0010-XX
0.062 1.57 0.375 9.53 0.062 1.57 0.125 3.18
7800-0015-XX
0.062 1.57 0.500 12.70 0.062 1.57 0.125 3.18
7800-0020-XX
0.093 2.36 0.250 6.35 0.093 2.36 0.125 3.18
7800-0025-XX
0.093 2.36 0.375 9.53 0.093 2.36 0.125 3.18
7800-0030-XX
0.093 2.36 0.500 12.70 0.093 2.36 0.125 3.18
7800-0035-XX
0.125 3.18 0.250 6.35 0.125 3.18 0.125 3.18
7800-0040-XX
0.125 3.18 0.375 9.53 0.125 3.18 0.125 3.18
7800-0045-XX
0.125 3.18 0.500 12.70 0.125 3.18 0.125 3.18
7800-0050-XX
0.125 3.18 0.750 19.05 0.125 3.18 0.125 3.18
7800-0055-XX
0.188 4.78 0.375 9.53 0.188 4.78 0.125 3.18
7800-0060-XX
0.188 4.78 0.500 12.70 0.188 4.78 0.125 3.18
7800-0065-XX
0.188 4.78 0.750 19.05 0.188 4.78 0.125 3.18
7800-0070-XX
0.250 6.35 0.500 12.70 0.250 6.35 0.125 3.18
7800-0075-XX
0.250 6.35 0.750 19.05 0.250 6.35 0.125 3.18
Double | Mesh Combo Gasket
PART NUMBER ELASTOMER MESH
HEIGHT (A) WIDTH (B) HEIGHT (C) WIDTH (D)
7900-0005-XX
0.062 1.57 0.250 6.35 0.062 1.57 0.125 3.18
7900-0010-XX
0.062 1.57 0.500 12.70 0.062 1.57 0.125 3.18
7900-0015-XX
0.093 2.36 0.250 6.35 0.093 2.36 0.125 3.18
7900-0020-XX
0.093 2.36 0.500 12.70 0.093 2.36 0.125 3.18
7900-0025-XX
0.125 3.18 0.250 6.35 0.125 3.18 0.125 3.18
7900-0030-XX
0.125 3.18 0.375 9.53 0.125 3.18 0.125 3.18
7900-0035-XX
0.125 3.18 0.500 12.70 0.125 3.18 0.125 3.18
7900-0040-XX
0.188 4.78 0.250 6.35 0.188 4.78 0.125 3.18
7900-0045-XX
0.188 4.78 0.500 12.70 0.188 4.78 0.125 3.18
Material Code Wire
Specification Elastomer
-74 Monel Wire - 0.0045 Dia. (0.10)
Per QQ-N-281B Neoprene Sponge
MIL-R-6130B, Type II, Grade A
-75 Monel Wire - 0.0045 Dia. (0.10)
Per QQ-N-281B Silicone Sponge
Per AMS 3195
-76 Monel Wire - 0.0045 Dia. (0.10)
Per QQ-N-281B
Silicone Solid
Per ZZR765, Class 2B,
Grade 40
-77 Tin Plated Copper Clad Steel
0.0045 Dia. (0.10) ASTM-B-520 Neoprene Sponge
MIL-R-6130B, Type II, Grade A
-78 Tin Plated Copper Clad Steel
0.0045 Dia. (0.10) ASTM-B-520 Silicone Sponge
Per AMS 3195
-79 Tin Plated Copper Clad Steel
0.0045 Dia. (0.10) ASTM-B-520
Silicone Solid
Per ZZR765, Class 2B,
Grade 40
Part Number Example
7XXX - 9XXX - XX
Mesh Style
9 if tape required
Assigned by Leader Tech Material Code
Knitted Wire Series
TECHMESH COMBO STRIP
Black = inches
Blue = mm
Black = inches
Blue = mm
B
C
D
KNITWIRE SHIELDING
C
D
ELASTOMER
EMI Enclosure Shielding Solutions 29
Knitted Wire Series
Leader Tech's TechMESH Tape has double layered strip of knitted
wire mesh to provide effective EMI shielding and grounding for
electric and electronic cable assemblies. This is particularly useful in
applications where the need for EMI protection is determined after
the cable assembly is complete and standard braided shielded
cable cannot be used. The flexible structure of Leader TechMESH
Tape permits it to conform to irregular surfaces and the cable
contours during the wrapping process. TechMESH Tape is 0.020"
(0,51mm) thick. It is available in tin plated copper clad steel (-71) or
Monel (-72) width 10-12 openings per inch.
Performance Advantages
• Tin plated for excellent solderability
• Useful in both shielding and grounding applications for static discharge
• Tin plated copper clad steel wire provides greater strength and
performance than other mesh tape materials
• Knit loop structure provides uniform coverage minimizing wrinkles and
creases
• Available in other alloys and wire dimensions
• Supplied in 50 ft. (15,2mm) rolls (Note: When determining quantity
needed, 50% overlap is recommended)
TECHMESH TAPE
6000 | Tape
PART NUMBER WIDTH
6000-0025-XX
0.250 +/– 0.40 6.4 +/– 1.0
6000-0038-XX
0.380+/– 0.40 9.7 +/– 1.0
6000-0050-XX
0.500+/– 0.60 12.7 +/– 1.5
6000-0075-XX
0.750+/– 0.60 19.1 +/– 24.4
6000-0100-XX
1.00+/– 0.60 25.4 +/– 1.5
6000-0150-XX
1.50+/– 0.120 38.1 +/– 3.1
6000-0175-XX
1.75+/– 0.120 44.5 +/– 3.1
6000-0225-XX
2.25+/– 0.120 57. 2 +/– 4.8
Part Number Explanation
6000 - XXXX - XX
Profile Style Select Size from chart above Material Code
6000 | Tape
MATERIAL CODE WIRE SPECIFICATION
-71
Tin Plated Copper Clad Steel - 0.0045 Dia. (0.10) ASTM-B-520
-72
Monel Wire - 0.0045 Dia. (0.10) Per QQ-N-281
Black = inches
Blue = mm
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
30
Fabric Shielding Gaskets
Leader Tech (FSG):
Fabric: Nickel/Copper RipStop
Foam: Open Cell Polyurethane
Compression Set: <15% (ASTM D3574)
Temperature Range: -40°F to 158°F (-40°C to 70°C) (ASTM D746)
Surface Resistivity: ≤0.050 Ω/inch² (ASTM F390)
Flammability Rating: UL94V0
Shielding Effectiveness: >Up to 105 dB (MIL-DTL-83528C)
Pressure Sensitive Adhesive: Non-conductive, high peel strength
ROHS: Compliant
REACH: Compliant
Tolerances:
TYPICAL LENGTH TOLERANCES
0.20 to 6.00 in. (5 - 152 mm) ±.03 in. (0.76 mm)
6.01 to 18.00 in. (153 - 457 mm) ±.06 in. (1.52 mm)
18.01 to 48.00 in. (458 - 1219 mm) ±.08 in. (2.03 mm)
TYPICAL CROSS SECTION TOLERANCES
±.010 in. (0.25 mm) for all dimensions up to 0.04 in. (1.02 mm)
±.020 in. (0.50 mm) for all dimensions above 0.04 in. (1.02 mm)
(Detailed part drawings are available upon request)
TECHNICAL DATA
Shielding gaskets are, very simply, connectors of two opposing metallic planes which make them appear as one
continuous surface, by connecting across the openings. Depending on the frequencies involved, the openings
must be reduced as closely as possible to a continuous seal.
Leader Tech’s unique Fabric Shielding Gasket structure is a combination of a highly conductive nickel/copper
ripstop fabric and a resilient polyurethane foam core. Leader Tech’s FSG products have superior shielding
properties and ensure long performance life all in a cost effective manner.
*Other sizes available.
Consult factory.
EMI Enclosure Shielding Solutions 31
W
H
L1
L2
H
W
W
H
Typical Performance
Shielding Effectiveness
80 - 115dB
Frequency Range
20Mhz - 10GHz
Dura-Layer Construction
Polyurethane foam core with high-performance fabric
Recommended Compression
30-50% of gasket height
FSG FOR ELECTRONIC ENCLOSURES
Square Shape
PART NUMBER HEIGHT WIDTH LENGTH
SG080080S
0.080 2.03 0.080 2.03 48 1219
SG118118S
0.118 3.00 0.118 3.00 48 1219
SG138138S
0.138 3.54 0.138 3.54 48 1219
SG160160S
0.160 4.06 0.160 4.06 48 1219
SG200200S
0.200 5.08 0.200 5.08 48 1219
SG250250S
0.250 6.35 0.250 6.35 48 1219
SG315315S
0.315 8.00 0.315 8.00 48 1219
SG354354S
0.354 8.99 0.354 8.99 48 1219
SG375375S
0.375 9.52 0.375 9.52 48 1219
SG472472S
0.472 11.99 0.472 11.99 48 1219
SG500500S
0.500 12.70 0.500 12.70 48 1219
SG512512S
0.512 13.00 0.512 13.00 48 1219
SG551551S
0.551 14.00 0.551 14.00 48 1219
SG575575S
0.575 14.60 0.575 14.60 48 1219
SG591591S
0.591 15.01 0.591 15.01 48 1219
SG670670S
0.670 17.02 0.670 17.02 48 1219
SG787787S
0.787 19.99 0.787 19.99 48 1219
Bell Shape
PART NUMBER HEIGHT WIDTH LENGTH
SG070180B
0.070 1.78 0.180 4.57 48 1219
SG090315B
0.090 2.29 0.315 8.00 48 1219
SG098299B
0.098 2.49 0.299 7.59 48 1219
SG100300B
0.100 2.54 0.300 7.62 48 1219
SG130256B
0.130 3.30 0.256 6.50 48 1219
SG157500B
0.157 3.99 0.500 12.70 48 1219
SG200500B
0.200 5.08 0.500 12.70 48 1219
C-Shape
PART NUMBER HEIGHT WIDTH LENGTH
SG196325C
0.196 4.98 0.325 8.25 48 1219
SG196535C
0.196 4.98 0.535 13.59 48 1219
SG240415C
0.240 6.10 0.415 10.54 48 1219
SG252280C
0.252 6.40 0.280 7.11 48 1219
SG315315C
0.315 8.00 0.315 8.00 48 1219
SG347685C
0.347 8.81 0.685 17.40 48 1219
SG380420C
0.380 9.65 0.420 10.67 48 1219
SG385420C
0.385 9.78 0.420 10.67 48 1219
SG465420C
0.465 11.811 0.420 10.67 48 1219
SG550590C
0.550 13.97 0.590 14.99 48 1219
SG675580C
0.675 17.14 0.580 14.73 48 1219
SG675600C
0.675 17.14 0.600 15.24 48 1219
Black = inches
Blue = mm
Black = inches
Blue = mm
Black = inches
Blue = mm
Part Number Explanation
SG XXX XXX X - XX.XX
#Start Height Width Profile Length
*Example:
SG125250D-22.50: Gasket .125 tall, .250 wide, D-Shape and 22.5” long
Typical Cross Section Tolerances
±.010 in. (0.25 mm) for all dimensions up to 0.04 in. (1.02 mm)
±.020 in. (0.50 mm) for all dimensions above 0.04 in. (1.02 mm)
Detailed part drawings are available upon request.
Typical Length Tolerances
0.20 to 6.00 in. (5 - 152 mm) ±.03 in. (0.76 mm)
6.01 to 18.00 in. (153 - 457 mm) ±.06 in. (1.52 mm)
18.01 to 48.00 in. (458 - 1219 mm) ±.08 in. (2.03 mm)
Fabric Shielding Gaskets
H
L
W
T-Shape
PART NUMBER HEIGHT WIDTH LENGTH
SG152235T
0.152 3.86 0.235 5.97 48 1219
SG157245T
0.157 3.99 0.245 6.22 48 1219
SG175244T
0.175 4.44 0.244 6.20 48 1219
SG244244T
0.244 6.20 0.244 6.20 48 1219
Black = inches
Blue = mm
H
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
32
W
H
Rectangle Shape
PART NUMBER HEIGHT WIDTH LENGTH
SG020157R
0.020 0.51 0.157 3.99 48 1219
SG020197R
0.020 0.51 0.197 5.00 48 1219
SG020275R
0.020 0.51 0.275 6.98 48 1219
SG0391181R
0.039 0.99 1.181 30.00 48 1219
SG039118R
0.039 0.99 0.118 3.00 48 1219
SG040125R
0.040 1.02 0.125 3.17 48 1219
SG0401850R
0.040 1.02 1.850 46.99 48 1219
SG040200R
0.040 1.02 0.200 5.08 48 1219
SG040275R
0.040 1.02 0.275 6.98 48 1219
SG040395R
0.040 1.02 0.395 10.03 48 1219
SG040590R
0.040 1.02 0.590 14.99 48 1219
SG040710R
0.040 1.02 0.710 18.03 48 1219
SG050090R
0.050 1.27 0.090 2.29 48 1219
SG051157R
0.051 1.30 0.157 3.99 48 1219
SG051394R
0.051 1.30 0.394 10.01 48 1219
SG060100R
0.060 1.52 0.100 2.54 48 1219
SG060125R
0.060 1.52 0.125 3.17 48 1219
SG060130R
0.060 1.52 0.130 3.30 48 1219
SG060160R
0.060 1.52 0.160 4.06 48 1219
SG060200R
0.060 1.52 0.200 5.08 48 1219
SG060280R
0.060 1.52 0.280 7.11 48 1219
SG060394R
0.060 1.52 0.394 10.01 48 1219
SG060395R
0.060 1.52 0.395 10.03 48 1219
SG060750R
0.060 1.52 0.750 19.05 48 1219
SG079157R
0.079 2.00 0.157 3.99 48 1219
SG0801000R
0.080 2.03 1.000 25.40 48 1219
SG080100R
0.080 2.03 0.100 2.54 48 1219
SG080160R
0.080 2.03 0.160 4.06 48 1219
SG080200R
0.080 2.03 0.200 5.08 48 1219
SG080500R
0.080 2.03 0.500 12.70 48 1219
SG080750R
0.080 2.03 0.750 19.05 48 1219
SG100200R
0.100 2.54 0.200 5.08 48 1219
SG118118R
0.118 3.00 0.118 3.00 48 1219
SG120155R
0.120 3.05 0.155 3.94 48 1219
SG125250R
0.125 3.17 0.250 6.35 48 1219
SG125375R
0.125 3.17 0.375 9.52 48 1219
SG140250R
0.140 3.56 0.250 6.35 48 1219
Part Number Explanation
SG XXX XXX X - XX.XX
#Start Height Width Profile Length
*Example:
SG125250D-22.50: Gasket .125 tall, .250 wide, D-Shape and 22.5” long
Typical Cross Section Tolerances
±.010 in. (0.25 mm) for all dimensions up to 0.04 in. (1.02 mm)
±.020 in. (0.50 mm) for all dimensions above 0.04 in. (1.02 mm)
Detailed part drawings are available upon request.
Typical Length Tolerances
0.20 to 6.00 in. (5 - 152 mm) ±.03 in. (0.76 mm)
6.01 to 18.00 in. (153 - 457 mm) ±.06 in. (1.52 mm)
18.01 to 48.00 in. (458 - 1219 mm) ±.08 in. (2.03 mm)
Rectangle Shape cont.
PART NUMBER HEIGHT WIDTH LENGTH
SG157590R
0.157 3.99 0.590 14.99 48 1219
SG160354R
0.160 4.06 0.354 8.99 48 1219
SG250375R
0.250 6.35 0.375 9.52 48 1219
SG250500R
0.250 6.35 0.500 12.70 48 1219
SG250600R
0.250 6.35 0.600 15.24 48 1219
SG187375R
0.187 4.75 0.375 9.52 48 1219
SG187750R
0.187 4.75 0.750 19.05 48 1219
SG197315R
0.197 5.00 0.315 8.00 48 1219
SG200200R
0.200 5.08 0.200 5.08 48 1219
SG250250R
0.250 6.35 0.250 6.35 48 1219
SG375500R
0.375 9.52 0.500 12.70 48 1219
SG500500R
0.500 12.70 0.500 12.70 48 1219
SG500750R
0.500 12.70 0.750 19.05 48 1219
SG670670R
0.670 17.02 0.670 17.02 48 1219
SG787787R
0.787 19.99 0.787 19.99 48 1219
W
H
Knife Edge
PART NUMBER HEIGHT WIDTH LENGTH
SG070340K
0.070 1.78 0.340 8.64 48 1219
SG106315K
0.106 2.69 0.315 8.00 48 1219
SG106445K
0.106 2.69 0.445 11.30 48 1219
SG106455K
0.106 2.69 0.455 11.56 48 1219
SG-160600K
0.106 2.69 0.600 15.24 48 1219
SG187236K
0.187 4.75 0.236 5.99 48 1219
SG250750K
0.250 6.35 0.750 19.05 48 1219
SG312707K
0.312 7.92 0.270 6.86 48 1219
SG350750K
0.350 8.89 0.750 19.05 48 1219
Black = inches
Blue = mm
D
Round Shape
PART NUMBER DIAMETER LENGTH
SG100100Z
0.100 2.54 48 1219
SG125125Z
0.125 3.17 48 1219
SG160160Z
0.160 4.06 48 1219
SG200200Z
0.200 5.08 48 1219
Black = inches
Blue = mm
FSG FOR ELECTRONIC ENCLOSURES CONT.
Black = inches
Blue = mm
Black = inches
Blue = mm
Fabric Shielding Gaskets
Tape is not available.
EMI Enclosure Shielding Solutions 33
FSG FOR ELECTRONIC ENCLOSURES CONT.
W
H
D-Shape
PART NUMBER HEIGHT WIDTH LENGTH
SG040150D
0.040 1.02 0.150 3.81 48 1219
SG040200D
0.040 1.02 0.200 5.08 48 1219
SG050140D
0.050 1.27 0.140 3.56 48 1219
SG050250D
0.050 1.27 0.250 6.35 48 1219
SG060125D
0.060 1.52 0.125 3.17 48 1219
SG060150D
0.060 1.52 0.150 3.81 48 1219
SG060250D
0.060 1.52 0.250 6.35 48 1219
SG070135D
0.070 1.78 0.135 3.43 48 1219
SG70180D
0.070 1.78 0.180 4.57 48 1219
SG080080D
0.080 2.03 0.080 2.03 48 1219
SG080160D
0.080 2.03 0.160 4.06 48 1219
SG080394D
0.080 2.03 0.394 10.01 48 1219
SG090090D
0.090 2.29 0.090 2.29 48 1219
SG090150D
0.090 2.29 0.150 3.81 48 1219
SG094200D
0.094 2.39 0.200 5.08 48 1219
SG100300D
0.100 2.54 0.300 7.62 48 1219
SG110180D
0.110 2.79 0.180 4.57 48 1219
SG120150D
0.120 3.05 0.150 3.81 48 1219
SG120250D
0.120 3.05 0.250 6.35 48 1219
SG120360D
0.120 3.05 0.360 9.14 48 1219
SG120475D
0.120 3.05 0.475 12.06 48 1219
SG125187D
0.125 3.17 0.187 4.75 48 1219
SG125250D
0.125 3.17 0.250 6.35 48 1219
SG130190D
0.130 3.30 0.190 4.83 48 1219
SG140250D
0.140 3.56 0.250 6.35 48 1219
SG150250D
0.150 3.81 0.250 6.35 48 1219
SG160240D
0.160 4.06 0.240 6.10 48 1219
SG180400D
0.180 4.57 0.400 10.16 48 1219
SG187250D
0.187 4.75 0.250 6.35 48 1219
SG195260D
0.195 4.95 0.260 6.60 48 1219
SG236236D
0.236 5.99 0.236 5.99 48 1219
SG250375D
0.250 6.35 0.375 9.52 48 1219
SG295355D
0.295 7.49 0.355 9.02 48 1219
SG315630D
0.315 8.00 0.630 16.00 48 1219
SG375500D
0.375 9.52 0.500 12.70 48 1219
SG430500D
0.430 10.92 0.500 12.70 48 1219
SG562709D
0.562 14.27 0.709 18.00 48 1219
SG670670D
0.670 17.02 0.670 17.02 48 1219
Black = inches
Blue = mm
Part Number Explanation
SG XXX XXX X - XX.XX
#Start Height Width Profile Length
*Example:
SG125250D-22.50: Gasket .125 tall, .250 wide, D-Shape and 22.5” long
Typical Cross Section Tolerances
±.010 in. (0.25 mm) for all dimensions up to 0.04 in. (1.02 mm)
±.020 in. (0.50 mm) for all dimensions above 0.04 in. (1.02 mm)
Detailed part drawings are available upon request.
Typical Length Tolerances
0.20 to 6.00 in. (5 - 152 mm) ±.03 in. (0.76 mm)
6.01 to 18.00 in. (153 - 457 mm) ±.06 in. (1.52 mm)
18.01 to 48.00 in. (458 - 1219 mm) ±.08 in. (2.03 mm)
W
H
Oval Shape
PART NUMBER HEIGHT WIDTH LENGTH
SG140200E
0.140 3.56 0.200 5.08 48 1219
SG160790E
0.160 4.06 0.790 20.07 48 1219
Black = inches
Blue = mm
W
H
Triangle Shape
PART NUMBER HEIGHT WIDTH LENGTH
SG098500TR
0.098 2.49 0.500 12.70 48 1219
SG090394TR
0.090 2.29 0.394 10.01 48 1219
SG100400TR
0.100 2.54 0.400 10.16 48 1219
SG140390TR
0.140 3.56 0.390 9.91 48 1219
Black = inches
Blue = mm
Typical Performance
Shielding Effectiveness
80 - 115dB
Frequency Range
20Mhz - 10GHz
Dura-Layer Construction
Polyurethane foam core with high-performance fabric
Recommended Compression
30-50% of gasket height
Fabric Shielding Gaskets
H
W
H
W
P-Shape
PART NUMBER HEIGHT WIDTH LENGTH
SG016195P
0.016 0.41 0.195 4.95 48 1219
SG060275P
0.060 1.52 0.275 6.98 48 1219
SG080200P
0.080 2.03 0.200 5.08 48 1219
SG125750P
0.125 3.17 0.750 19.05 48 1219
SG130520P
0.130 3.30 0.520 13.20 48 1219
SG145520P
0.145 3.68 0.520 13.21 48 1219
SG200395P
0.200 5.08 0.395 10.03 48 1219
L1
L1
H
W
Black = inches
Blue = mm
W
H
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
34
FSG FOR ELECTRONIC ENCLOSURES CONT.
Typical Cross Section Tolerances
±.010 in. (0.25 mm) for all dimensions up to 0.04 in. (1.02 mm)
±.020 in. (0.50 mm) for all dimensions above 0.04 in. (1.02 mm)
Detailed part drawings are available upon request.
Typical Length Tolerances
0.20 to 6.00 in. (5 - 152 mm) ±.03 in. (0.76 mm)
6.01 to 18.00 in. (153 - 457 mm) ±.06 in. (1.52 mm)
18.01 to 48.00 in. (458 - 1219 mm) ±.08 in. (2.03 mm)
D-Sub Miniature
PART NUMBER TYPE A B C D E F G H
SG140009DS
9 Pin 1.40 35.56 0.98 24.89 0.78 19.81 0.44 11.18 0.22 5.59 0.7 17.78 0.1 2.54 0.15 3.81
SG175015DS
15 Pin 1.75 44.45 1.31 33.27 1.11 28.19 0.44 11.18 0.22 5.59 0.7 17.78 0.1 2.54 0.15 3.81
SG228025DS
25 Pin 2.28 57.91 1.85 46.99 1.65 41.91 0.44 11.18 0.22 5.59 0.7 17.78 0.1 2.54 0.15 3.81
SG293037DS
37 Pin 2.93 74.42 2.50 63.54 2.29 58.17 0.44 11.18 0.22 5.59 0.7 17.78 0.1 2.54 0.15 3.81
SG284050DS
50 Pin 2.84 72.14 2.41 61.21 2.20 55.88 0.55 13.97 0.28 7.11 0.8 20.32 0.1 2.54 0.15 3.81
Black = inches
Blue = mm
Fabric Shielding Gaskets
Typical Performance
Shielding Effectiveness
80 - 115dB
Frequency Range
20Mhz - 10GHz
Dura-Layer Construction
Polyurethane foam core with high-performance fabric
Recommended Compression
30-50% of gasket height
A
B
C
E
D H
G
F
D-SUB MINIATURE
very conformable to irregular surfaces.
• Eliminates any gap problem between connector and I/O surface
plates. Compresses from .100" to .025" (2.5 to 0.6mm)
• Outside conductive surface is metalized CuNi fabric
• 9, 15, 25, 37 and 50 pin connector gaskets available in stock
• Available with adhesive tape. Please consult factory for
ordering information
• Consult factory for custom profiles, thicknesses and sizes available
• For metal option - see page 22
F
EMI Enclosure Shielding Solutions 35
Fabrics & Tapes
Shielding Fabrics
Shielding effectiveness is determined by a combination
of the reflection and absorption of RF signals. Absorption
depends on the thickness of the shield material. However,
reflection occurs at the shield surface and its effectiveness
is independent of thickness. Reflection is the determining
factor for all high frequency signal attenuation. (Note:
When using these materials for conductive shielding
gaskets, conductivity is the determinant.) Maximum
reflection occurs with the highest conductivity materials –
the best being copper, nickel and combinations of both.
Applications
Bonding or laminating to complex geometric shapes with optional
hot melt or conductive adhesive.
• Large surface coverage with minimal seams due to 41”
material width
• ESD/RFI-EMI shielding attenuation > 70dB up to 10 GHz for
CuNi type
• Seal enclosure panels and frames, seams or joints
• Use for architectural shielding or shielded room wall and
ceiling finishing
Options
• All materials are available in non-adhesive, hot melt or
conductive adhesive backing
• Standard sheets are 41” x 36” (1041 x 914 mm)
• Longer lengths can be custom ordered – please consult
factory for information
• Full rolls are 325’ (99M) long – please consult factory for
ordering information. Note: conductive adhesive versions
are 164’ (50M) long
Fabric Shielding Tapes
Applications
Cable shielding, enclosure seams, shielded room joints, PCB component
shields, irregular surface/component shields, alternative to custom die-cut
shielding gaskets or sections.
• Service Temperature: -40°F to 212°F (-40°C to 100°C)
• Adhesion: (peel) 50 oz/in. (54N/100mm)
• Material: CuNi metalized fabric and conductive acrylic adhesive
backing w/release liner
SHIELDING FABRICS & CONDUCTIVE TAPES
Shielding Fabrics
PART NUMBER
W/O ADHESIVE W/HOT MELT
ADHESIVE W/CONDUCTIVE
ADHESIVE DESCRIPTION WIDTH LENGTH THICKNESS SURFACE
RESISTIVITY 500KHZ 100MHZ 300MHZ 1GHZ
SF005PCN
SF005PCN-HM SF005PCN-CA Conductive CuNi Cloth 41 1041 36 914 0.003 0.076 .005 ohm/mm2 79dB 81dB 86dB 82dB
SF030PCU
SF030PCU-HM SF030PCU-CA Conductive Cu Cloth 41 1041 36 914 0.003 0.076 .035 ohm/mm2 60dB 67dB 65dB 62dB
SF050PNI
SF050PNI-HM SF050PNI-CA Conductive Ni Cloth 41 1041 36 914 0.004 0.102 .050 ohm/mm2 60dB 72dB 67dB 63dB
Fabric Shielding Tapes
PART NUMBER WIDTH THICKNESS LENGTH RESISTIVITY IMPEDANCE
ST005PCN25
0.25 6.35 0.005 0.13 85.0 ft. rolls 25.0m 0.03 - 0.05 ohms/inch 69dB@100MHz
ST005PCN50
0.50 12.70 0.005 0.13 85.0 ft. rolls 25.0m 0.03 - 0.05 ohms/inch 69dB@100MHz
ST005PCN75
0.75 19.05 0.005 0.13 85.0 ft. rolls 25.0m 0.03 - 0.05 ohms/inch 69dB@100MHz
ST005PCN100
1.00 25.40 0.005 0.13 85.0 ft. rolls 25.0m 0.03 - 0.05 ohms/inch 69dB@100MHz
ST005PCN200
2.00 50.80 0.005 0.13 85.0 ft. rolls 25.0m 0.03 - 0.05 ohms/inch 69dB@100MHz
Black = inches
Blue = mm
Black = inches
Blue = mm
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
Conductive Foam Shielding Material
CFS CONDUCTIVE FOAM SHIELDING MATERIAL FOR DIE-CUT GASKETS
CFS Conductive Foam Shielding Material consists of resilient Nickel-Copper polyurethane foam which
is layered between two pieces of conductive polyester fabric. This CFS Conductive Foam is ideal for
applications that require low compression forces but excellent shielding effectiveness.
Performance
Operating Temperatures: -40F – +156F (-40C - +70C)
Surface Resistivity: <0.2 ohms/sq
Shielding Effectiveness: 60dB Typical 10MHz – 3GHz
Flammability: UL94-HBF Unless otherwise noted UL94-V1*
Typical Compression Load: 2.1 PSI at recommended 30% compression
Availability
Sheets: Up to 1.0m x 1.0m (Custom Sizes Available)
Finishing: Precision Die-Cut Forms & Shapes
Available with Conductive Adhesive
Material Characteristics
High Shielding Effectiveness
Low Compression
Low Surface Resistivity
Applications
Intricate die cuts forms
I/O panels
Backplanes
Connectors
Access panels
*Other sizes available.
Consult Applications Engineering.
CFS Conductive Foam Shielding Material
PART NUMBER STD SHEET SIZE ADHESIVE
CFS1919060-NTP
19 X 19 X .060 NO
CFS1919060
19 X 19 X .060 YES
CFS1919098-NTP
19 X 19 X .098 NO
CFS1919098
19 X 19 X .098 YES
CFS1919138-NTP
19 X 19 X .138 NO
CFS1919138
19 X 19 X .138 YES
CFS2222060-V1-NTP*
22 X 22 X .060 NO
CFS2222060
22 X 22 X .060 YES
36
EMI Enclosure Shielding Solutions 37
CUSTOM AND DIE-CUT SHIELDING GASKETS
In addition to our large assortment of stock products, Leader Tech offers customers the ability to create custom and
die-cut shielding gaskets using any of our conductive elastomer formulations or fabric shielding gasket materials. Our
extensive manufacturing capabilities include extrusion, molding and precision die-cut shapes and sizes.
All of our high-performance custom shielding gaskets can be made from your choice of twelve MIL-DTL-83528
Conductive Elastomer compounds or from our Fabric Shielding Gasket material. Depending on your unique application
requirements, our engineering team will work to develop a custom gasketing solution that exhibits superior shielding
properties and ensures a long performance life in a cost effective manner.
Please review your application with our Material Specialist and Engineering Group to determine the best materials to use
for your application.
Die Cut Gasket Design Recommendations and Tolerances
NOTES:
1. Minimum recommended
flange width (W) is .125”.
2. Hole diameter (D) must exceed
material thickness (T).
3. Distance edge of hole to
edge of gasket (E) must
exceed material thickness (T).
If not possible, then a slot is
required.
4. Recommend assign datum to
hole C/L and not to edge of
gasket.
A
C
W
B
F
E > T
D
B
T
A
Tolerance Range
FEATURE TYPE Sample Dim. 0 - 4” 4.1 - 12” 12.1 - 24”
Length/Width
A, B, W +/- .020 +/- .030 +/- .040
Hole Location
C, F +/- .010 +/- .015 +/- .020
Hole Diameter
D+/- .020 +/- .030 +/- .040
Custom and Die-Cut Gaskets
W
C
A
B
B D E>T
F
T
A
Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.comPhone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com
ENGINEERS NOTES
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
38
EMI Enclosure Shielding Solutions
We’ve Got You Covered
Reliable Board, Enclosure and Cable Shielding Solutions
LeaderTech Shielding Products
Board Level Shielding
• Standard and Multi-Cavity CBS
• Modified Standard Options
• Custom Circuit Board Shields
FerriShield Ferrites
• Snap-On Bisected & Solid Bead Ferrites
• Round & Flat Styles for Cables, Wires and Flex Circuits
• Low, High, Microwave and Wideband Frequency-Specific Material
Enclosure Shielding
• BeCu Fingerstock Gaskets
• TechSIL 5000 Conductive Elastomers
• Conductive Fabric Shielding Gaskets
• TechSIL 8000 Oriented Wire Gaskets
• TechMESH Knitted Wire Gaskets
• TechMESH Combo Strip & Gaskets
CBS Circuit Board
Shielding Catalog
FerriShield
Ferrite Catalog
Our sales engineers are waiting for your call: 866-TECH-EMI (866-832-4364)
Visit our web site today to browse our complete product line, download
literature and find your local sales engineer or sales representative!
www.leadertechinc.com
Leader Tech is a world-leading innovator and US-based manufacturer of EMI shielding products for
circuit boards, enclosures and cables. In addition to our best selling standard, modified standard
and custom CBS shields, Leader Tech offers an expansive line of beryllium copper fingerstock
gaskets, conductive elastomers, advanced RF absorber materials and EMI/RFI ferrites.
TechSIL Conductive
Elastomer Catalog
PRODUCTS AND LITERATURE
EMI
Problem?
EA EMI Microwave
Absorbers Catalog
39
0914-2.5k
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
LeaderTech:
25-78FS-BD-24