Efficiency vs. Load (24V Input)
• Trim And Enable
Pins
• Fixed Frequency
• 1500V Isolation
• 6-Sided Shielding
DESCRIPTION
FEATURES
OBS SERIES
25 WATT
OBS single output DC/DC converters provide up to 25 Watts
of output power in an industry standard package and
footprint. The OBS units feature excellent efficiency, six-
sided shielding, and fixed switching frequency. With 100°C
case operation, the OBS converters are especially suited to
telecom, networking, and industrial applications. These
units are 100% surface-mount construction and fully
compatible with production board washing processes.
• Industry standard package
• 24 and 48V input versions
• 25W output power
• 100°C baseplate operation
General
Turn-On Time: 24 & 48Vin 10 ms
Remote Shutdown Positive
Remote Shutdown Reference Vin Negative
Switching Frequency 400 kHz
Isolation
Input - Output 1500 VDC
Input - Case (24 Vin units) 500 VDC
Output - Case (48 V in units) 500 VDC
Temperature Coefficient 0.03%/°C
Case Temperature
Operating Range -40 to +100°C
Storage Range -40 to +125°C
Humidity Max., Non-Condensing 95%
Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz
MTBF†(Bellcore TR-NWT-000332) 1.8 x 106hrs
Safety UL, cUL, TUV
Weight (Approx.) 1.9 oz
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC Nominal 18 - 36 VDC
48 VDC Nominal 34 - 75 VDC
Reflected Ripple 25 mA
Input Reverse Voltage Protection Shunt Diode
Output
Setpoint Accuracy ±1%
Line Regulation Vin Min - Vin Max., Iout Rated 0.2% Vout
Load Regulation Iout Min. - Iout Max., Vin Nom. 0.5% Vout
Minimum Output Current 10 % Iout Rated
Dynamic Regulation, Loadstep 25% Iout
Pk Deviation 4% Vout
Settling Time 500 µs
Voltage Trim Range ±10% Iout Rated
Short Circuit / Overcurrent Protection Hiccup
Current Limit Threshold Range, % of Iout Rated 110 - 140%
OVP Trip Range 115 - 140%Vout Nom.
OVP Hiccup
Notes
†MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load,
unless otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully
compatible with commercial wave-soldering equipment.
Units are water-washable and fully compatible with commercial
spray or immersion post wave-solder washing equipment.