High sensitivity and superior electrical and environmental reliability characterize these module detectors. They are hermetically sealed and contain internal RF matching, DC return, and RF bypass capacitor. In addition, the video port can be protected from static or transient voltages. This feature prevents damage due to handling (usually static) or system video transients. Models may be chosen for broadband RF performance or for optimized narrow bands. They may be broadband ECM receivers, radar equipment, beacon or multi-channel receivers. Each detector model contains: Control SCHOTTKY DIODE MODULE DETECTORS Components used in microstrip or stripline applications for power monitoring, e Input Impedance Matching e DC return RF bypass capacitor e Detector diode e Video protection diode Features: Static Protection e High Sensitivity e Small Size Applications: e Transmitter Monitoring e Radar Equipment e Missile Guidance Systems Input to Low-Noise Amplifiers e Broadband Or Narrowband ECM Receivers e Power and Signal Monitors e Doppler Radar and Beacon Receivers Matched units available for Multi-channel Receivers, Amplitude Comparator Systems and Discriminators Minimum Flatness Nominal (3) Frequency a. __ Sensitivity vs Typical(2) _*Video Standard _ Optional Range Part (1) K __ Frequency Tss Capacitance Case Case (GHz) Number (mVimW) __(+/-dB) (dBm) | (PF) Styles | Styles 0.1-1 ACSM2035N 2000 0.25 -52 270 M12 M34, M35, M47 05-2 ACSM2001N__. 2000 04 ae -53 te) M12 M34, M35, M47 1-2 ACSM2066N 2000 0.2 53 20 M12 M34,M35,M47,M50,M51 05-4 ACSM2108N 2000 0.4. 53 20 | M12 M43, M50, M51 1-4 ACSM2038N 2000 0.4 -53 20 M12 M50, M51 2-4 ACSM2002N 2000 0.4 63 20 M12 M50, M51 1-8 ACSM2075N 2000 0.5 -53 20 M12 2-8 ACSM2014N 2000 0.5 -53 20 M12 = 4-8 ACSM2003N 2000 0.4 -53 20 M12 M50, M51 2-12 _ ACSM2007N 2000 0.9 52 20 M12 _ 8-12 ACSM2004N 2000 0.65 -52 12 M12 = 1-18 ACSM2047N 1800 1.0 51 20 Mi2 _~ 2-18 ACSM2006N 1800 1.0 -51 12 M12 8-18 ACSM2015N 1800 OT ae -52 12 M12 - 12-18 ACSM2005N 2000 0.6 -52 12 M12 = NOTES: 1) Standard output polarity is negative. If negative output is required, substitute P for N in part number. 2) Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with respect to noise. It is measured using a video amplifier with a 2MHz bandwidth and a 3dB noise figure. 3) Video capacitance is used for RF bypass. This value can be changed if required for video response time or other considerations. Contact the factory if value other than those shown are needed. 4) Video protection is available on most models. This feature helps to prevent damage to the detector diode from incidents occurring at the video port. Transient electromagnetic spikes, static contact, or voltage surges can easily damage a detector diode. A video protection diode will clamp the voltage at a value less than the detector breakdown voltage. NOTE: Inclusion of this protection will cause the output voltage to compress and clamp. This occurs at about +10dBm input to the detector. If operation above +10dBm is required then the output protection should be modified or excluded. Adding a suffix X at the end of the model number will exclude the video protection feature. Contact the factory for assistance. 5) Zero bias schottky versions are available for most of listed biased schottky models with only minor differences in specifications. a. The zero bias schottky has an impedance of several thousand ohms. b. Zero bias schottky detectors exhibit less sensitive TSS due to the high diode impedance (typically a 3dB reduction). c. The temperature performance of the zero bias schottky is poor when operating at low input power levels. This difference becomes small at high levels (above 0dBm input power). The part number of zero bias versions includes a Z following the polarity indicator. 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com Advanced Control Components frre, ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -65C to +125C Storage Temp: -65C to +150C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D Maximum Input Power: +20dBm 9.120 0.080 4 goo12 | TYP. INPUT +~ 0.129 4 SS 0.058 SCREENING : Standard Screening: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65C to +100C, 10 cycles Optional High-Rel Screening (Ref MIL-PRF-38534): Internal Visual per MIL-STD-883, Method 2017 Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Leak Test per MIL-STD-883, Method 1014 External Visual per MIL-STD-883, Method 2009 9.250 - 0.330 Tt 0.120 + = >= ar OUTPUT PL | 0.246 +.003 | 003 THRU TYP. CASE STYLE M12 0.411.002 0.400 MAX. 0.2524.008 0.210 COLORED DOT > 0.079.002 0.180 RUT 0.058. eipies sa. MAX. | 0.015#.003 (2) PLes. _f ye. t =a ES] 0.1612,001 L i: (0.0802.001 tf o1so F ; , 0.1954.010 CTs CES) 0.012 MAX. (2) PLCS. | = sor MOFLAD f * a 0.004 x 0.020 fo a MIN. @) PLCS. ozose ona 0.080 2058. MAX. 0.005+.00 ooezs oan wen [8 + CASE STYLE M47 CASE STYLE M50 20.3608.002 rc 0.300.002 4 0.160 0.120 0.250 + 0.080 oase O10 0.185215 | 0.05220.004 (2) pucs 7 i | pee sel 0.1018. 009 <= = = = i | 1 . L 4 L 0.094 + CASE STYLE M43 Part Number Ordering Information: CASE STYLE M34 Example: ACSM2015NZM51X20 ACSMZ2015: Schottky Module Detector, 8 - 18GHz N: Negative output polarity Z: Zero bias version (omit for biased version) M51: Package type X: No video protection (omit for inclusion of video protection) 20: 20pF custom output capacitance (omit for standard value) COLORED DOT INPUT 0.280.005 0.079+.002 20.096+.003 ln THRU 0.160 dt o.c20Max. fo (TO FLAT) 0.080 {001 ors fl +.010 (2) PLCS. 0,004 X 0.020 MIN. (2) PLCS. 0.205+.003 fr t 0.126 .004 0.062.002 CASE STYLE M51 be oasocend J & 8 CASE STYLE M35 SM-0303B 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com _www.advanced-control.com