Cree XLamp XM-L LED Kit Newark element14 has created an XM-L LED kit. The Cree XLamp XM-L LED is the industry's highest performing single-die white LED. The lighting-class XM-L LED can deliver 1000 lumens with 100 lumens per watt efficacy. The XM-L LED is available in the full spectrum of white. With breakthrough light output and efficacy, the XM-L is designed for very high lumen applications. Typical lighting applications would include the following: street and roadway, high-bay and industrial, outdoor area, LED replacement lamps, and indoor commercial. The kit consists of: * * * * Cree XM-L LED mounted on a star MCPCB XP Power LED DRIVER Ledil lenses: spot and wide Aavid thermalloy heat sink Note: You will need a DC power supply (see XP Power LED driver specifications below) and some soldering will be required in order to operate this kit. Part Number Table Description SKU Part Number Cree X-Lamp XM-L LED Kit 67T1879 XM-L STAR EVAL KIT Instructions * Solder the driver wires per the diagram below to the power supply and to the star MCPCB (the white wire for the control function is not needed unless dimming is required) www.element14.com www.farnell.com www.newark.com Page <1> 09/12/11 V1.1 Cree XLamp XM-L LED Kit LDU Connections LDU24-WD Function 1 (Black) -Vin: -DC supply 2 (White) Control 8 (Blue) -Vout: LED cathode connection 9 (Yellow) +Vout: LED anode connection 16 (Red) +Vin: +DC supply Note for LDU2430S700-WD LED Driver: Do not connect pin 1 (-Vin) to pin 8 (-Vout). * Peel back the thermal adhesive pad of the heat sink and attach the LED star board * Attach appropriate LED lens if applicable * Turn on power supply Cree: XLamp XM-L LEDs The XLamp XM-L LED is the industry's highest performing, single die white lighting-class LED. The XLamp XM-L is 20% more efficient than the XLamp XP-G at the same current and can deliver 1000 lumens with 100 lumens per Watt efficacy. Key Features Applications * * * * * * * * * * * * LED light bulbs * Outdoor lighting and indoor lighting * Solar-powered lighting Maximum drive current: 3,000 mA CCT: 8300 K Luminous Flux: 280 lm at 700 mA Test If Low thermal resistance: 2.5C/W Maximum junction temperature: 150C Viewing angle: 125 Available in warm, neutral and cool white ANSI-compatible chromaticity bins Unlimited floor life at 30C / 85% RH Reflow solderable - JEDEC J-STD-020C Electrically neutral thermal path Part Number Table Description Part Number LED Module, Star, Cool White, 280LM XMLAWT-00-0000-0000T6053-STAR www.element14.com www.farnell.com www.newark.com Page <2> 09/12/11 V1.1 Cree XLamp XM-L LED Kit XP Power: LED Driver The LED driver comes with 7 V - 30 V input voltage, 2 V - 28 V output voltage, 700 mA output current, 95% efficiency and 20W output power. Key Features * * * * * * Constant current output LED drive current up to 700 mA LED strings from 2 V to 57 V PWM and analogue dimming control High efficiency - up to 95% Open or short circuit LED protection Part Number Table Description Part Number LED Driver, 28V DC, 20W LDU2430S700-WD LEDIL: LED Lenses The FA11908_CXM_SS LED lens is designed for the XM-L LED. It is a spot lens - 21.6 mm diameter, 13 mm height and square style. The FA11942_CXM_W LED lens is also designed for the XM-L LED. It is a wide angle lens - 21.6 mm diameter, 13 mm height and square style. Key Features * Tape mounting saves board space by eliminating mounting holes * Convenient peel and stick assembly is quick and clean Part Number Table Description Part Number Cree XML, 21mm Optic, Spot, Taped FA11908_CXM_SS Cree XML, 21mm Optic, Wide, Taped FA11942_CXM_W www.element14.com www.farnell.com www.newark.com Page <3> 09/12/11 V1.1 Cree XLamp XM-L LED Kit AAVID THERMALLOY: Heat Sink The heat sink comes with 0.5 thermal resistance, acrylic adhesive, white colour, aluminium carrier and meets RoHS 9,000. Key Features * Tape mounting saves board space by eliminating mounting holes * Convenient peel and stick assembly is quick and clean * Pin fin array allows omni-directional airflow to maximize heat dissipation Part Number Table Description Part Number Heat Sink BGA 23 x 23 x 10 with Pad 374024B00032G Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. element14 is the registered trademark of the Group. (c) Premier Farnell plc 2011. www.element14.com www.farnell.com www.newark.com Page <4> 09/12/11 V1.1