VYK 70 IFAV = 3x 28 A VRRM = 800-1600 V Three Thyristor Module Preliminary data VRSM VDSM VRRM VDRM V V 800 1200 1400 1600 800 1200 1400 1600 A Type 2 3 1 C D E VYK 70-08io7 VYK 70-12io7 VYK 70-14io7 VYK 70-16io7 Symbol Test Conditions Maximum Ratings IFAVM IFRMS TC = 85C, 50 - 400 Hz (per phase) TC = 85C, 50 - 400 Hz (per phase) ITSM TVJ = 45C; VR = 0 28 43 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 550 600 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 500 550 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1520 1520 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1250 1250 A2s A2s TVJ = TVJM repetitive, IT = 25 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/ms 150 A/ms 500 A/ms Features Package with metal base plate Isolation voltage 3000 V~ Planar passivated chips UL applied * 1/4" fast-on power terminals oi2dt Applications (di/dt)cr Advantages (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 1000 tp = 30 ms tp = 300 ms V/ms PGAVM 10 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 2500 3000 V~ V~ VISOL 50/60 Hz, RMS IISOL 1 mA Md Mounting torque (M5) (10-32 UNF) Weight typ. t = 1 min t=1s 515 % 4415 % 110 Switching and control of three phase AC circuits Softstart AC motor controller Solid state switches Light and temperature control Easy to mount with two screws Space and weight savings Improved temperature and power cycling Nm lb.in. g Data according to IEC 60747 refer to a single diode/thyristor unless otherwise stated IXYS reserves the right to change limits, test conditions and dimensions. (c) 2000 IXYS All rights reserved 1-2 VYK 70 Symbol Test Conditions Characteristic Values ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM 5 VT IT 1.45 V VT0 rT For power-loss calculations only (TVJ = 125C) 0.85 11 V mW VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ = TVJM; IL = 45 A; TVJ = 25C mA TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 1.5 1.6 100 200 V V mA mA VD = 2/3 VDRM 0.2 5 V mA TVJ = 25C; tP = 10 ms IG = 0.45 A; diG/dt = 0.45 A/ms 450 mA IH TVJ = 25C; VD = 6 V; RGK = 200 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/ms 2 ms tq TVJ = TVJM; IT = 20 A, tP = 200 ms; di/dt = -10 A/ms VR = 100 V; dv/dt = 15 V/ms; VD = 2/3 VDRM typ. 150 ms RthJC per thyristor; sine 180el per module per thyristor; sine 180el per module RthJH dS dA a Creeping distance on surface Creepage distance in air Max. allowable acceleration 0.9 0.15 1.1 0.183 K/W K/W K/W K/W 16.1 6.0 50 mm mm m/s2 Dimensions in mm (1 mm = 0.0394") (c) 2000 IXYS All rights reserved 2-2