NON-ISOLATED DC/DC CONVERTERS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A POWER PRODUCTS BP05SRDB-10E SRDB-10E Series * Nonisolated * Compact, low profile surface mount package * Wide input * High efficiency means less power dissipation * Excellent thermal performance * Optimized for cost * Remote on/off * Undervoltage lockout (UVLO) * Over current and short circuit protection * Remote sense * Active high/low Description The Bel SRDB-10E modules are a series of non-isolated, step down DC/DC power converters that operate from a nominal 4.5V to 13.2V source. These converters are available in a range of output voltages from 1.0V to 5.0V. The output is closely regulated and the efficiency of the 3.3V output module is typically 88% at full load. The modules are packaged in a compact, low profile, surface mount DIP package for ease of layout and space savings. 10A maximum output is also provided. Standard features include remote on/off, remote sense, over current and short circuit protection, UVLO and output voltage adjust. These products may be used almost anywhere low voltage silicon is employed and a 4.5V to 13.2V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications * Distributed power architectures * Data networking equipment * Telecommunications * Computers and peripherals Part Number Selection Output Voltage Input Voltage Max. Output Current Max. Output Power Typical Efficiency Part Number Active Low Part Number Active High 5.0V 8V - 13.2V 10A 50W 91% SRDB-10E500 SRDB-10E50H 3.3V 4.5V - 13.2V 10A 33W 88% SRDB-10E330 SRDB-10E33H 2.5V 4.5V - 13.2V 10A 25W 86% SRDB-10E250 SRDB-10E25H 1.8V 4.5V - 13.2V 10A 18W 82% SRDB-10E180 SRDB-10E18H 1.5V 4.5V - 13.2V 10A 15W 80% SRDB-10E150 SRDB-10E15H 1.2V 4.5V - 13.2V 10A 12W 77% SRDB-10E120 SRDB-10E12H 1.0V 4.5V - 13.2V 10A 10W 75% SRDB-10E100 SRDB-10E10H (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 1 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Absolute Maximum Ratings Parameter Max Unit -0.3 16 V Vouten -0.5 7 V Ambient Temperature Tamb 0 70 C Storage Temperature Tstor -40 105 C Continuous Input Voltage Output Enable Terminal Voltage Symbol Min Vin Typical Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Module Operating Input Voltage Symbol Min Typical Max V Vin 1.0V - 3.3V 5.0V Input Current Units 13.2 13.2 4.5 8 A Iin 7.9 9.1 7.4 5.6 4.8 4 3.4 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 1.0V No Load Input Current Vin = 4.5V Iin 60 mA No Load Input Current Vin = 8.0V Iin 80 mA No Load Input Current Vin = 13.2V Iin 100 mA Input Reflected Ripple Current1 All 40 80 mArms Input Reflected Ripple Current (P-P)1 All 120 200 mApk I2t Inrush Current Transient All 0.1 0.2 A 2s Turn On Voltage Threshold All 4 4.5 V Turn Off Voltage Threshold All 3.5 4.2 V Note: Input capacitance two 270F/16V, ESR = 0.018 max at 100kHz @ 25 C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Output Specifications Parameter Module Output Voltage Set Point Min Typical Max 4.900 3.234 2.450 1.764 1.470 1.176 0.980 5.0 3.3 2.5 1.8 1.5 1.2 1.0 5.100 3.366 2.550 1.836 1.530 1.224 1.020 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 1.0V 10 7 6 6 6 5 5 20 14 12 12 12 10 10 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 1.0V 3 3 2 2 2 2 2 6 6 5 5 5 5 5 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 1.0V 30 24 22 20 18 16 14 60 48 44 40 36 32 28 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 1.0V 43 34 30 28 26 23 21 86 68 61 57 53 47 43 1 Symbol Units Vout 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 1.0V V Load Regulation mV Line Regulation mV Regulation Over Temperature mV Total Output Voltage Regulation mV Output Ripple and Noise 2 All 50 100 mVp-p Output Ripple and Noise 2 All 15 30 mVrms Output Current Range All Iout 0 10 A Output DC Current Limit All Ioutlim 12 25 A Shor t Circuit Surge All Ioutsurge 0.2 A2s Turn on Time All Ton 20 ms Overshoot at Turn On All 3% V Output Capacitance All 4000 F 0.1 0 Cout 0 Note: All specifications are typical at nominal input, full load at 25 C unless otherwise stated. 1. Vin = 8V, Iout = full load, Ta = 25 C. 2. Two 270F/16V with ESR = 0.018 max at input, 0 - 20MHz BW, 1F ceramic cap and 10F aluminum cap at output. (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 3 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Output Specifications Parameter Module Symbol Min Typical Max Units 120 200 mV Transient Response 3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load 8V to 13.2V Input 5V Output Settling Time Transient Response 60 100 s 120 200 mV Ts 60 100 s 90 150 mV Ts 60 100 s 90 150 mV 60 100 s 80 150 mV 60 100 s 80 150 mV 60 100 s 80 150 mV 60 100 s 80 150 mV 60 100 s 80 150 mV 60 100 s 80 150 mV 60 100 s 80 150 mV 60 100 s 80 150 mV 60 100 s 80 150 mV 60 100 s 80 150 mV 60 100 s Ts 3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load 4.5V to 13.2V Input 3.3V Output Settling Time Ts Transient Response 3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load 4.5V to 13.2V Input 2.5V Output Settling Time Ts Ts Transient Response 3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load 4.5V to 13.2V Input 1.8V Output Settling Time Ts Ts Transient Response 3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load 4.5V to 13.2V Input 1.5V Output Settling Time Ts Ts Transient Response 3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load 4.5V to 13.2V Input 1.2V Output Settling Time Ts Ts Transient Response 3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load Settling Time 4.5V to 13.2V Input 1.0V Output Ts Ts Note: All specifications are typical at nominal input, full load at 25 C unless otherwise stated. 3. di/dt = 0.5A/S, Ta = 25 C with external 220F Tan cap. (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E General Specifications Parameter Module Symbol Min Typical 88 85 83 79 77 74 72 91 88 86 82 80 77 75 250 310 Max Efficiency1 Vin = 12V, Io = Io max 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 1.0V Switching Frequency All Output Voltage Trim Range2 All Remote Sense Compensation All Weight All Fsw Units % 90 370 110 10 10.5 kHz % % g 1. Vin=12V, full load and Ta=25 C. 2. See graphs on pages 13 - 16. Note: For 3.3V output module, when the input voltage is between 4.5Vdc to 5.0Vdc, the output voltage trim range is 90%-105%, and the remote sense compensation is 5%. Control Specifications Parameter Remote On/Off 3 Module Symbol All Vouten Signal Low (Unit Off) Min Typical Max Units V 0 0.9 V 2.1 5 V 0 0.9 V 2.1 5 V S7DB-10ExxH Signal High (Unit On) Signal Low (Unit On) S7DB-10Exx0 Signal High (Unit Off) 3. With remote on/off pin 8 open, the module is on. (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 5 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Efficiency Data Module 3.3V Module 5.0V 98% 96% 94% 94% 92% 90% 88% 8.0V 10.8V 86% 13.2V 84% 82% 80% EFFICIENCY EFFICIENCY 90% 86% 4.5V 8.0V 82% 13.2V 78% 74% 78% 70% 76% 66% 74% 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 1.0 10.0 2.0 3.0 4.0 5.0 Module 2.5V 7.0 8.0 9.0 10.0 Module 1.8V 96% 94% 92% 90% 88% 86% 84% 4.5V 8.0V 80% 13.2V 76% EFFICIENCY EFFICIENCY 6.0 OUTPUT CURRENT OUTPUT CURRENT 82% 8.0V 13.2V 74% 72% 70% 68% 66% 64% 4.5V 78% 62% 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 OUTPUT CURRENT (c)2005 Bel Fuse Inc. 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 OUTPUT CURRENT Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Efficiency Data Module 1.5V 92% 88% EFFICIENCY 84% 80% 4.5V 8.0V 76% 13.2V 72% 68% 64% 60% 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 OUTPUT CURRENT Module 1.2V 92% 88% 84% EFFICIENCY 80% 4.5V 76% 8.0V 13.2V 72% 68% 64% 60% 56% 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 OUTPUT CURRENT Module 1.0V 90% 86% 82% EFFICIENCY 78% 4.5V 74% 8.0V 70% 13.2V 66% 62% 58% 54% 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 OUTPUT CURRENT (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 7 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Ripple and Noise 1F ceramic cap and 10F aluminum electrolytic cap added at the output. Ripple and noise at full load and 8Vdc input, 5.0Vdc output and Ta=25 C Ripple and noise at full load and 8Vdc input, 2.5Vdc output and Ta=25 C (c)2005 Bel Fuse Inc. Ripple and noise at full load and 8Vdc input, 3.3Vdc output and Ta=25 C Ripple and noise at full load and 8Vdc input, 1.8Vdc output and Ta=25 C Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 8 NON-ISOLATED DC/DC CONVERTERS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A POWER PRODUCTS BP05SRDB-10E Ripple and Noise 1F ceramic cap and 10F aluminum electrolytic cap added at the output. Ripple and noise at full load and 8Vdc input, 1.5Vdc output and Ta=25 C Ripple and noise at full load and 8Vdc input, 1.2Vdc output and Ta=25 C Ripple and noise at full load and 8Vdc input, 1.0Vdc output and Ta=25 C (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 9 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Transient Response Transient response: di/dt = 0.5A/S, with external 220F Tan capacitor. Vout=5.0V 50% to 100% load transients at 8V input and Ta=25 C Vout=5.0V 100% to 50% load transients at 8V input and Ta=25 C Vout=3.3V 50% to 100% load transients at 8V input and Ta=25 C Vout=3.3V 100% to 50% load transients at 8V input and Ta=25 C Vout=2.5V 50% to 100% load transients at 8V input and Ta=25 C Vout=2.5V 100% to 50% load transients at 8V input and Ta=25 C (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 10 NON-ISOLATED DC/DC CONVERTERS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A POWER PRODUCTS BP05SRDB-10E Transient Response Transient response: di/dt = 0.5A/S, with external 220F Tan capacitor. Vout=1.8V 50% to 100% load transients at 8V input and Ta=25 C Vout=1.8V 100% to 50% load transients at 8V input and Ta=25 C Vout=1.5V 50% to 100% load transients at 8V input and Ta=25 C Vout=1.5V 100% to 50% load transients at 8V input and Ta=25 C Vout=1.2V 50% to 100% load transients at 8V input and Ta=25 C Vout=1.2V 100% to 50% load transients at 8V input and Ta=25 C (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 11 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Transient Response Transient response: di/dt = 0.5A/S, with external 220F Tan capacitor. Vout=1.0V 50% to 100% load transients at 8V input and Ta=25 C Vout=1.0V 100% to 50% load transients at 8V input and Ta=25 C Thermal Considerations (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 12 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Output Voltage Set-Point Adjustment Trim Down Test Circuit Trim Up Test Circuit Vo Vo Trim Trim Gnd Gnd Output Voltage Set-Point Adjustment SRDB-10E50x Trim Resistor Calculation Rtrim_ down = ( 61.91 - 31.61) Kohm Vo - Vo, adj Trim resistor value Rtrim_down(Kohm) 3000 2701 2402 2103 1804 1505 1206 907 608 309 Rtrim_ up = ( 11.768 - 16.9) Kohm Vo, adj - Vo Trim resistor value,Rtrim_up(Kohm) 10 4.5 4.55 4.6 4.65 4.7 4.75 4.8 4.85 Adjusted output voltage Vo,adj (V) 4.9 4.95 5 5.45 5.5 270 240 210 180 150.01 120.01 90.01 60.01 30.01 0.01 5 5.05 5.1 5.15 5.2 5.25 5.3 5.35 Adjusted output voltage Vo,adj(V) (c)2005 Bel Fuse Inc. 5.4 Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 13 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E SRDB-10E33x Trim Resistor Calculation Rtrim _ down = ( 7.964 - 6.82) Kohm Vo - Vo, adj Trim resistor value Rtrim_down(Kohm) Output Voltage Set-Point Adjustment 270 240 210 180 150.01 120.01 90.01 60.01 30.01 Rtrim_ up = ( 2.536 - 3.65) Kohm Vo, adj - Vo Trim resistor value,Rtrim_up(Kohm) 0.01 2.97 3 3.04 3.33 3.37 3.07 3.1 3.13 3.17 3.2 Adjusted output voltage Vo,adj (V) 3.23 3.27 3.3 270 240 210 180 150.01 120.01 90.01 60.01 30.01 0.01 3.3 3.4 3.43 3.46 3.5 3.53 Adjusted output voltage Vo,adj(V) 3.56 3.6 3.63 7.568 - 14.43) Kohm Rtrim_ down = ( Vo - Vo, adj Trim resistor value Rtrim_down(Kohm) SRDB-10E25x Trim Resistor Calculation 270 240 210 180 150.01 120.01 90.01 60.01 30.01 3.544 Rtrim_ up = ( - 10) Kohm Vo, adj - Vo Trim resistor value,Rtrim_up(Kohm) 0.01 2.25 2.27 2.3 2.52 2.55 2.33 2.35 2.38 2.4 2.42 Adjusted output voltage Vo,adj (V) 2.45 2.48 2.5 270 240 210 180 150.01 120.01 90.01 60.01 30.01 0.01 2.5 (c)2005 Bel Fuse Inc. 2.58 2.6 2.63 2.65 2.67 Adjusted output voltage Vo,adj(V) 2.7 2.73 Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 14 2.75 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E SRDB-10E18x Trim Resistor Calculation Rtrim_ down = ( 3.869 - 13.84) Kohm Vo - Vo, adj Trim resistor value Rtrim_down(Kohm) Output Voltage Set-Point Adjustment 270 240 210 180 150.01 120.01 90.01 60.01 30.01 Rtrim_ up = ( 3.072 - 10) Kohm Vo, adj - Vo Trim resistor value,Rtrim_up(Kohm) 0.01 1.62 1.64 1.66 1.82 1.84 1.67 1.69 1.71 1.73 1.75 Adjusted output voltage Vo,adj (V) 1.76 1.78 1.8 270 240 210 180 150.01 120.01 90.01 60.01 30.01 0.01 1.8 1.85 1.87 1.89 1.91 1.93 Adjusted output voltage Vo,adj(V) 1.94 1.96 1.98 2.716 Rtrim_ down = ( - 11.71) Kohm Vo - Vo, adj Trim resistor value Rtrim_down(Kohm) SRDB-10E15x Trim Resistor Calculation 270 240 210 180 150.01 120.01 90.01 60.01 30.01 3.072 Rtrim_ up = ( - 7.87) Kohm Vo, adj - Vo Trim resistor value,Rtrim_up(Kohm) 0.01 1.35 1.37 1.38 1.51 1.53 1.4 1.41 1.43 1.44 1.46 Adjusted output voltage Vo,adj (V) 1.47 1.49 1.5 270 240 210 180 150.01 120.01 90.01 60.01 30.01 0.01 1.5 (c)2005 Bel Fuse Inc. 1.54 1.56 1.58 1.59 1.61 Adjusted output voltage Vo,adj(V) 1.62 1.64 1.65 Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 15 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E Output Voltage Set-Point Adjustment 1.562 Rtrim _ down = ( - 8.48) Kohm Vo - Vo, adj Trim resistor value Rtrim_down(Kohm) SRDB-10E12x Trim Resistor Calculation 270 240 210 180 150.01 120.01 90.01 60.01 30.01 Rtrim_ up = ( 3.072 - 4.64) Kohm Vo, adj - Vo Trim resistor value,Rtrim_up(Kohm) 0.01 1.08 1.09 1.1 1.21 1.22 1.12 1.13 1.14 1.15 1.16 Adjusted output voltage Vo,adj (V) 1.18 1.19 1.2 270 240 210 180 150.01 120.01 90.01 60.01 30.01 0.01 1.2 1.24 1.25 1.26 1.27 1.28 Adjusted output voltage Vo,adj(V) 1.3 1.31 1.32 0.658 Rtrim _ down = ( - 4.17) Kohm Vo - Vo, adj Trim resistor value Rtrim_down(Kohm) SRDB-10E10x Trim Resistor Calculation 270 240 210 180 150.01 120.01 90.01 60.01 30.01 2.536 Rtrim _ up = ( - 1) Kohm Vo, adj - Vo Trim resistor value,Rtrim_up(Kohm) 0.01 0.9 0.91 0.92 0.93 0.94 0.95 0.96 0.97 Adjusted output voltage Vo,adj (V) 0.98 0.99 1 1.01 1.02 1.03 1.04 1.05 1.06 1.07 Adjusted output voltage Vo,adj(V) 1.08 1.09 1.1 270 240 210 180 150.01 120.01 90.01 60.01 30.01 0.01 (c)2005 Bel Fuse Inc. 1 Specifications subject to change without notice. 03.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 16 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 4.5V - 13.2V Input / 1.0V - 5.0V Output / 10A BP05SRDB-10E 1.22 [30.99] Mechanical 0.394 [10.01] 0.67 [17.00] 0.345 0.010 [8.76 0.25] 0- 5 0.004 [0.10] 0.102 0.002 [2.59 0.05] 6X 0.197 [5.00] 5X 0.985 [25.02] Pin Function 1 Ground 2 Ground 3 Ground 4 Ground 5 +Vin 6 +Vin 7 Trim 8 Remote On/Off 9 Remote Sense (+) 10 +Vo 11 +Vo 12 +Vo 0.050 [1.27] 2X 0.078 [1.99] 2X 0.827 0.010 [21.01 0.25] 0.010 [0.25] Dimensions are in inches [millimeters]. Standard dimension tolerance is 0.005 [0.13] unless otherwise noted. 12 11 10 9 8 7 1 2 3 4 5 6 RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. These parts are not however compatible with the higher temperatures associated with lead free solder processes and must be soldered using a reflow profile with a peak temperature of no more than 240C. (c)2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 17