Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
• Nonisolated
• Compact, low profile surface mount package
• Wide input
• High efficiency means less power dissipation
• Excellent thermal performance
• Optimized for cost
• Remote on/off
• Undervoltage lockout (UVLO)
• Over current and short circuit protection
• Remote sense
• Active high/low
Description
The Bel SRDB-10E modules are a series of non-isolated, step down DC/DC power conver ters that operate from a nominal
4.5V to 13.2V source. These converters are available in a range of output voltages from 1.0V to 5.0V. The output is closely
regulated and the efficiency of the 3.3V output module is typically 88% at full load. The modules are packaged in a compact,
low profile, surface mount DIP package for ease of layout and space savings. 10A maximum output is also provided. Standard
features include remote on/off, remote sense, over current and shor t circuit protection, UVLO and output voltage adjust.
These products may be used almost anywhere low voltage silicon is employed and a 4.5V to 13.2V source is available.
Typical applications include file ser vers, routers, line cards and other computing and communications equipment.
Applications
page 1
SRDB-10E Series
• Distributed power architectures
• Data networking equipment
• Telecommunications
• Computers and peripherals
Part Number Selection
tuptuO egatloV tupnI egatloV tuptuO.xaM tnerruC tuptuO.xaM rewoP lacipyT ycneiciffE rebmuNtraP woLevitcA rebmuNtraP hgiHevitcA
V0.5V2.31-V8A01W05%19005E01-BDRSH05E01-BDRS
V3.3V2.31-V5.4A01W33%88033E01-BDRSH33E01-BDRS
V5.2V2.31-V5.4A01W52%68052E01-BDRSH52E01-BDRS
V8.1V2.31-V5.4A01W81%28081E01-BDRSH81E01-BDRS
V5.1V2.31-V5.4A01W51%08051E01-BDRSH51E01-BDRS
V2.1V2.31-V5.4A01W21%77021E01-BDRSH21E01-BDRS
V0.1V2.31-V5.4A01W01%57001E01-BDRSH01E01-BDRS
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 2
Input Specifications
Absolute Maximum Ratings
Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC
converter or may permanently damage the device.
Note: Input capacitance two 270µF/16V, ESR = 0.018 Ω max at 100kHz @ 25° C.
1.With simulated source impedance of 500nH, 5Hz to 20MHz.
retemaraP lobmyS niM lacipyT xaM tinU
egatloVtupnIsuounitnoCniV3.0- 61V
egatloVlanimreTelbanEtuptuOnetuoV5.0- 7V
erutarepmeTtneibmAbmaT0 07C°
erutarepmeTegarotSrotsT04- 501C°
retemaraP eludoM lobmyS niM lacipyT xaM stinU
egatloVtupnIgnitarepO V3.3-V0.1 V0.5
niV 5.482.31 2.31
V
tnerruCtupnI V0.5 V3.3 V5.2 V8.1 V5.1 V2.1 V0.1
niI 9.7 1.9 4.7 6.5 8.444.3
A
tnerruCtupnIdaoLoN V5.4=niVniI 06 Am
tnerruCtupnIdaoLoN V0.8=niVniI 08 Am
tnerruCtupnIdaoLoN V2.31=niVniI 001 Am
tnerruCelppiRdetcelfeRtupnI
1
llA 0408Am
smr
)P-P(tnerruCelppiRdetcelfeRtupnI
1
llA 021002kpAm
I
2
tneisnarTtnerruChsurnItllA 1.02.0A
2
s
dlohserhTegatloVnOnruTllA 45.4V
dlohserhTegatloVffOnruTllA 5.32.4V
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 3
Output Specifications
Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated.
1. Vin = 8V, Iout = full load, Ta = 25° C.
2. Two 270µF/16V with ESR = 0.018 Ω max at input, 0 - 20MHz BW, 1µF ceramic cap and 10µF aluminum cap at output.
retemaraP eludoM lobmyS niM lacipyT xaM stinU
tnioPteSegatloVtuptuO
1
V0.5 V3.3 V5.2 V8.1 V5.1 V2.1 V0.1
tuoV 009.4 432.3 054.2 467.1 074.1 671.1 089.0
0.5 3.3 5.2 8.1 5.1 2.1 0.1
001.5 663.3 055.2 638.1 035.1 422.1 020.1
V
noitalugeRdaoL V0.5 V3.3 V5.2 V8.1 V5.1 V2.1 V0.1
01
7
6
6
6
5
5
02412121210101
Vm
noitalugeReniL V0.5 V3.3 V5.2 V8.1 V5.1 V2.1 V0.1
3
3
2
2
2
2
2
6
6
5
5
5
5
5
Vm
erutarepmeTrevOnoitalugeR V0.5 V3.3 V5.2 V8.1 V5.1 V2.1 V0.1
03422202816141
06844404632382
Vm
noitalugeRegatloVtuptuOlatoT V0.5 V3.3 V5.2 V8.1 V5.1 V2.1 V0.1
34430382623212
68861675357434
Vm
esioNdnaelppiRtuptuO
2
llA 05001p-pVm
esioNdnaelppiRtuptuO
2
llA 5103smrVm
egnaRtnerruCtuptuOllAtuoI0 01A
timiLtnerruCCDtuptuOllAmiltuoI2152A
egruStiucriCtrohSllAegrustuoI 1.02.0A
2
s
emiTnonruTllAnoT 02sm
nOnruTtatoohsrevOllA 0%3V
ecnaticapaCtuptuOllAtuoC0 0004Fµ
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 4
Output Specifications
Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated.
3. di/dt = 0.5A/µS, Ta = 25° C with exter nal 220µF Tan cap.
retemaraP eludoM lobmyS niM lacipyT xaM stinU
esnopseRtneisnarT
3
∆daoLxaMfo%001ot%05V
tupnIV2.31otV8 tuptuOV5
021002Vm
emiTgniltteSsT06001sµ
∆daoLxaMfo%05ot%001V 021002Vm
emiTgniltteSsT06001sµ
esnopseRtneisnarT
3
∆daoLxaMfo%001ot%05V
tupnIV2.31otV5.4 tuptuOV3.3
09051Vm
emiTgniltteSsT06001sµ
∆daoLxaMfo%05ot%001V 09051Vm
emiTgniltteSsT06001sµ
esnopseRtneisnarT
3
∆daoLxaMfo%001ot%05V
tupnIV2.31otV5.4 tuptuOV5.2
08051Vm
emiTgniltteSsT06001sµ
∆daoLxaMfo%05ot%001V 08051Vm
emiTgniltteSsT06001sµ
esnopseRtneisnarT
3
∆daoLxaMfo%001ot%05V
tupnIV2.31otV5.4 tuptuOV8.1
08051Vm
emiTgniltteSsT06001sµ
∆daoLxaMfo%05ot%001V 08051Vm
emiTgniltteSsT06001sµ
esnopseRtneisnarT
3
∆daoLxaMfo%001ot%05V
tupnIV2.31otV5.4 tuptuOV5.1
08051Vm
emiTgniltteSsT06001sµ
∆daoLxaMfo%05ot%001V 08051Vm
emiTgniltteSsT06001sµ
esnopseRtneisnarT
3
∆daoLxaMfo%001ot%05V
tupnIV2.31otV5.4 tuptuOV2.1
08051Vm
emiTgniltteSsT06001sµ
∆daoLxaMfo%05ot%001V 08051Vm
emiTgniltteSsT06001sµ
esnopseRtneisnarT
3
∆daoLxaMfo%001ot%05V
tupnIV2.31otV5.4 tuptuOV0.1
08051Vm
emiTgniltteSsT06001sµ
∆daoLxaMfo%05ot%001V 08051Vm
emiTgniltteSsT06001sµ
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 5
Control Specifications
General Specifications
1. Vin=12V, full load and Ta=25° C.
2. See graphs on pages 13 - 16.
Note: For 3.3V output module, when the input voltage is between 4.5Vdc to 5.0Vdc, the output voltage
trim range is 90%-105%, and the remote sense compensation is 5%.
3. With remote on/off pin 8 open, the module is on.
retemaraP eludoM lobmyS niM lacipyT xaM stinU
ycneiciffE
1
xamoI=oI,V21=niVV0.5 V3.3 V5.2 V8.1 V5.1 V2.1 V0.1
η88583897774727
19886828087757
%
ycneuqerFgnihctiwS llA wsF 052013073 zHk
egnaRmirTegatloVtuptuO
2
llA09 011 %
noitasnepmoCesneSetomeR llA 01 %
thgieWllA 5.01 g
retemaraP eludoM lobmyS niM lacipyT xaM stinU
ffO/nOetomeR
3
llAnetuoV V
)ffOtinU(woLlangiS HxxE01-BD7S 0 9.0V
)nOtinU(hgiHlangiS1.2 5V
)nOtinU(woLlangiS 0xxE01-BD7S 09.0V
)ffOtinU(hgiHlangiS1.2 5V
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 6
Efficiency Data
Mo d ule 5.0V
74%
76%
78%
80%
82%
84%
86%
88%
90%
92%
94%
96%
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
OUTPUT CURRENT
EFFICIENCY
8.0V
10.8V
13.2V
Module 3.3V
66%
70%
74%
78%
82%
86%
90%
94%
98%
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
OUTPUT CURRE NT
EFFICIENCY
4.5V
8.0V
13.2V
Module 2. 5V
64%
68%
72%
76%
80%
84%
88%
92%
96%
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
OUTP UT CURRE NT
EFFICIENCY
4.5V
8.0V
13.2V
Modul e 1.8V
62%
66%
70%
74%
78%
82%
86%
90%
94%
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
OUTPUT CURRENT
EFFICIENCY
4.5V
8.0V
13.2V
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
Efficiency Data
page 7
Modul e 1.5V
60%
64%
68%
72%
76%
80%
84%
88%
92%
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
OUTP UT CU RRENT
EFFICIENCY
4.5V
8.0V
13.2V
Module 1.2V
56%
60%
64%
68%
72%
76%
80%
84%
88%
92%
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
OUTP UT CURRENT
EFFICIENCY
4.5V
8.0V
13.2V
Mo du l e 1. 0V
54%
58%
62%
66%
70%
74%
78%
82%
86%
90%
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
OUTP U T CURRENT
E
FFICIENC
Y
4.5V
8.0V
13.2V
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 8
Ripple and Noise
Ripple and noise at full load and 8Vdc input,
5.0Vdc output and Ta=25° C Ripple and noise at full load and 8Vdc input,
3.3Vdc output and Ta=25° C
Ripple and noise at full load and 8Vdc input,
2.5Vdc output and Ta=25° C
1µF ceramic cap and 10µF aluminum electrolytic cap added at the output.
Ripple and noise at full load and 8Vdc input,
1.8Vdc output and Ta=25° C
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
Ripple and Noise
1µF ceramic cap and 10µF aluminum electrolytic cap added at the output.
Ripple and noise at full load and 8Vdc input,
1.5Vdc output and Ta=25° C
Ripple and noise at full load and 8Vdc input,
1.2Vdc output and Ta=25° C
Ripple and noise at full load and 8Vdc input,
1.0Vdc output and Ta=25° C
page 9
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 10
Transient Response
Transient response: di/dt = 0.5A/µS, with external 220µF Tan capacitor.
Vout=5.0V
50% to 100% load transients at 8V input and Ta=25° C Vout=5.0V
100% to 50% load transients at 8V input and Ta=25° C
Vout=3.3V
50% to 100% load transients at 8V input and Ta=25° C Vout=3.3V
100% to 50% load transients at 8V input and Ta=25° C
Vout=2.5V
50% to 100% load transients at 8V input and Ta=25° C Vout=2.5V
100% to 50% load transients at 8V input and Ta=25° C
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 11
Transient Response
Vout=1.5V
50% to 100% load transients at 8V input and Ta=25° C
Vout=1.8V
50% to 100% load transients at 8V input and Ta=25° C Vout=1.8V
100% to 50% load transients at 8V input and Ta=25° C
Vout=1.5V
100% to 50% load transients at 8V input and Ta=25° C
Transient response: di/dt = 0.5A/µS, with external 220µF Tan capacitor.
Vout=1.2V
50% to 100% load transients at 8V input and Ta=25° C Vout=1.2V
100% to 50% load transients at 8V input and Ta=25° C
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
Thermal Considerations
Transient Response
Vout=1.0V
50% to 100% load transients at 8V input and Ta=25° C Vout=1.0V
100% to 50% load transients at 8V input and Ta=25° C
Transient response: di/dt = 0.5A/µS, with external 220µF Tan capacitor.
page 12
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 13
Output V oltage Set-Point Adjustment
Vo
Tr i m
Gnd
Vo
Tr i m
Gnd
Trim Down Test Circuit Trim Up Test Circuit
Output V oltage Set-Point Adjustment
SRDB-10E50x Trim Resistor Calculation
4.5 4.55 4.6 4.65 4.7 4.75 4.8 4.85 4.9 4.95 5
10
309
608
907
1206
1505
1804
2103
2402
2701
3000
Adjusted output voltage Vo,adj (V)
Trim r esis tor value R trim_down( Kohm)
5 5.05 5.1 5.15 5.2 5.25 5.3 5.35 5.4 5.45 5.5
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output voltage Vo,adj(V)
Trim res is tor value,Rtrim_up(Kohm)
Kohm
adjVoVo
down
R
trim )61.31
,
91.61
(_ −
−
=
Kohm
VoadjVo
upRtrim )9.16
,768.11
(_ −
−
=
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
2.25 2.27 2.3 2.33 2.35 2.38 2.4 2.42 2.45 2.48 2.5
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output voltage V o,adj (V)
Tr im resist or va lue Rt rim_ down(Kohm)
2.5 2.52 2.55 2.58 2.6 2.63 2.65 2.67 2.7 2.73 2.75
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output voltage V o,adj(V)
Tr im resist or value,Rt rim_ up(Kohm)
Kohm
adjVoVo
down
R
trim )43.14
,
568.7
(_ −
−
=
Kohm
VoadjVo
upRtrim )10
,544.3
(_ −
−
=
2.97 3 3.04 3.07 3.1 3.13 3.17 3.2 3.23 3.27 3.3
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output volta ge V o,adj (V)
Tr im resist or va lue Rt rim_down(Kohm)
3.3 3.33 3.37 3.4 3.43 3.46 3.5 3.53 3.56 3.6 3.63
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output voltage Vo,adj(V)
Tr im resist or value,Rt rim_up(Kohm)
Kohm
adjVoVo
down
R
trim )82.6
,
964.7
(_ −
−
=
Kohm
VoadjVo
upRtrim )65.3
,536.2
(_ −
−
=
page 14
SRDB-10E33x Trim Resistor Calculation
SRDB-10E25x Trim Resistor Calculation
Output V oltage Set-Point Adjustment
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
1.35 1.37 1.38 1.4 1.41 1.43 1.44 1.46 1.47 1.49 1.5
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output voltage Vo,adj (V)
Tr im resist or va lue Rt rim_down(Kohm)
1.5 1.51 1.53 1.54 1.56 1.58 1.59 1.61 1.62 1.64 1.65
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output voltage Vo,adj(V)
Trim resistor value,Rtrim_up(K ohm)
Kohm
adjVoVo
down
R
trim )71.11
,
716.2
(_ −
−
=
Kohm
VoadjVo
upRtrim )87.7
,072.3
(_ −
−
=
1.62 1.64 1.66 1.67 1.69 1.71 1.73 1.75 1.76 1.78 1.8
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output volta ge V o,adj (V)
Tr im resist or va lue Rtrim_down(Kohm)
1.8 1.82 1.84 1.85 1.87 1.89 1.91 1.93 1.94 1.96 1.98
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output volta ge V o,adj(V)
Tr im resist or value,Rtrim_up(Kohm)
Kohm
adjVoVo
down
R
trim )84.13
,
869.3
(_ −
−
=
Kohm
VoadjVo
upRtrim )10
,072.3
(_ −
−
=
page 15
SRDB-10E18x Trim Resistor Calculation
SRDB-10E15x Trim Resistor Calculation
Output V oltage Set-Point Adjustment
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
0.9 0.91 0.92 0.93 0.94 0.95 0.96 0.97 0.98 0.99 1
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output volta ge Vo,adj (V)
Tr im resist or va lue Rt rim_down(Kohm)
1 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.1
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output voltage Vo,adj(V)
Trim resistor value,Rtrim_up(Kohm)
Kohm
adjVoVo
down
R
trim )17.4
,
658.0
(_ −
−
=
Kohm
VoadjVo
upRtrim )1
,536.2
(_ −
−
=
1.08 1.09 1.1 1.12 1.13 1.14 1.15 1.16 1.18 1.19 1.2
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output voltage Vo,adj (V)
Tr im resist or va lue Rtrim_down(Kohm)
1.2 1.21 1.22 1.24 1.25 1.26 1.27 1.28 1.3 1.31 1.32
0.01
30.01
60.01
90.01
120.01
150.01
180
210
240
270
Adjusted output voltage Vo,adj(V)
Trim resistor value,Rtrim_up(Kohm)
Kohm
adjVoVo
down
R
trim )48.8
,
562.1
(_ −
−
=
Kohm
VoadjVo
upRtrim )64.4
,072.3
(_ −
−
=
SRDB-10E12x Trim Resistor Calculation
SRDB-10E10x Trim Resistor Calculation
Output V oltage Set-Point Adjustment
page 16
CORPORATE
Bel Fuse Inc.
206 V an V orst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
FAR EAST
Bel Fuse Ltd.
8F / 8 Luk Hop Street
San Po Kong
K owloon, Hong K ong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
EUROPE
Bel Fuse Eur ope Ltd.
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
©2005 Bel Fuse Inc. Specifications subject to change without notice. 03.05
POWER PRODUCTS
NON-ISOLATED DC/DC CONVERTERS
BP05SRDB-10E
4.5V – 13.2V Input / 1.0V – 5.0V Output / 10A
page 17
Mechanical
Dimensions are in inches [millimeters].
Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted.
1.22 [30.99]
0.394 [10.01]
0.67
[17.00]
0.985 [25.02]
0.102 ±0.002
[2.59 ±0.05]
6X
0.197
[5.00]
5X
0.345 ±0.010
[8.76 ±0.25]
0.010
[0.25]
0.827 ±0.010
[21.01 ±0.25]
0.050 [1.27] 2X
0.078 [1.99] 2X
0.004 [0.10]
0˚- 5˚
niP noitcnuF
1dnuorG
2dnuorG
3dnuorG
4dnuorG
5niV+
6niV+
7mirT
8ffO/nOetomeR
9)+(esneSetomeR
01oV+
11oV+
21oV+
123456
12 11 10 987
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other
hazardous substances from electronic products. These parts are not however compatible with
the higher temperatures associated with lead free solder processes and must be soldered using
a reflow profile with a peak temperature of no more than 240ºC.
