ALUMINUM ELECTROLYTIC CAPACITORS EP Bi-Polarized, Wide Temperature Range series Bi-polarized series for operations over wide temperature range of - 55C to +105C. Compliant to the RoHS directive (2011/65/EU). EP Wide Temperature VP Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics -55 to +105C 6.3 to 100V 0.47 to 6800F 20% at 120Hz, 20C After 5 minutes' application of rated voltage at 20C, leakage current is not more than 0.03CV or 3 (A), whichever is greater. Measurement frequency : 120Hz, Temperature : 20C Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) 6.3 0.24 10 0.24 16 0.20 25 0.20 35 0.16 50 0.14 63 0.12 100 0.10 Measurement frequency : 120Hz Stability at Low Temperature 6.3 4 10 Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C 10 3 8 16 2 6 25 2 4 The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 105C with the polarity inverted every 250 hours. Endurance 35 2 3 50 2 3 Capacitance change tan Leakage current 63 2 3 100 2 3 Within 25% of the initial capacitance value (6.3to16V) Within 20% of the initial capacitance value (25to100V) 150% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Radial Lead Type Type numbering system (Example : 10V 47F) 1 d 2 3 4 5 6 7 8 9 10 11 UE P 1 A 4 7 0 M DD Configuration P0.5 D+0.5 MAX Sleeve (P.E.T.) Capacitance tolerance (20%) Rated capacitance (47F) Rated voltage (10V) Pressure relief vent 15MIN L+ MAX (6.3up) Series name 4MIN Type (mm) (L < 20) 1.5 (L 20) 2.0 D P d 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 Configuration 18 7.5 0.8 * Please refer to page 20 about the end seal configuration. Dimensions Cap. (F) 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 V Code 6.3 0J 10 1A R47 010 2R2 3R3 4R7 100 220 5 x 11 330 5 x 11 5 x 11 46 470 5 x 11 5 x 11 54 101 6.3 x 11 90 6.3 x 11 221 8 x 11.5 8 x 11.5 150 331 8 x 11.5 185 10 x 16 471 10 x 12.5 260 10 x 16 102 10 x 20 460 12.5 x 20 222 12.5 x 25 820 16 x 25 332 16 x 25 1110 16 x 31.5 472 16 x 31.5 1430 18 x 35.5 682 18 x 35.5 1830 16 1C 25 1E Frequency 5 DD 6.3 8 * 10 12.5 to 18 ED PD HD 35 1V 30 5 x 11 34 5 x 11 42 40 6.3 x 11 55 5 x 11 45 49 6.3 x 11 56 5 x 11 54 6.3 x 11 67 6.3 x 11 67 90 110 8 x 11.5 110 8 x 11.5 150 10 x 12.5 195 10 x 16 215 240 10 x 16 265 12.5 x 20 320 290 10 x 20 345 12.5 x 20 380 510 12.5 x 25 605 16 x 25 670 910 16 x 31.5 1070 18 x 35.5 1140 1200 18 x 35.5 1400 1520 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 31.5 25 30 51 72 86 160 290 350 465 805 50 1H 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 16 x 31.5 63 1J 8 12 18 22 5 x 11 22 6.3 x 11 37 6.3 x 11 63 8 x 11.5 77 10 x 12.5 105 10 x 16 190 12.5 x 20 340 16 x 25 460 16 x 31.5 590 18 x 35.5 20 31 40 68 98 130 225 405 535 680 100 2A 5 x 11 5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 12.5 x 20 12.5 x 20 16 x 25 18 x 35.5 10 15 20 25 30 50 97 140 170 300 510 Case size Rated D x L (mm) ripple Rated ripple current (mArms) at 105C 120Hz Frequency coefficient of rated ripple current 50 Hz 120Hz 300 Hz 1 kHz 10 kHz or more 0.47 to 47 0.75 1.00 1.35 1.57 2.00 0100 to 4700 0.80 1.00 1.23 1.34 1.50 1000 to 6800 0.85 1.00 1.10 1.13 1.15 Cap.(F) Pb-free leadwire Pb-free PET sleeve D Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D