GP1S093HCZ GP1S093HCZ Subminiature, Low Profile, Transmissive Type Photointerrupter Features Outline Dimensions 1. General purpose 2. Low profile(Height:2.9mm) 3. Wide gap(Gap width:2.0mm) 4. Slit width(Detector side):0.3mm Internal connection diagram : Top View a Top View (Unit : mm) 2 1 1 2 3 a (C0.3) 3 4 4 Anode Collector Emitter Cathode Applications 4.5 2.0 (C0.4) 2.1 Center of light path Input Output Parameter Forward current Reverse voltage Power dissipation Collector-emitter voltage Emitter-collector voltage Collector current Collector power dissipation Total power dissipation Operating temperature Storage temperature *1 Soldering temperature Unit mA V mW V V mA mW mW 2.6 (C0.3) (Ta=25C) Symbol Rating 50 IF VR 6 P 75 35 VCEO 6 VECO 20 IC 75 PC 100 Ptot -25 to +85 Topr -40 to +100 Tstg 260 Tsol 3.50.5 Absolute Maximum Ratings a-a section (0.3) Slit width 2.9 (0.75) 1. Cameras 2. CD-ROM drives 3. VCR +0.2 0.15-0.1 0.4 2.0 3.55 3 2 4 1 Unspecified tolerance : 0.2mm ( ) : Reference dimensions Burr's dimensions : 0.15MAX. C C C *1 For MAX. 5s 1mm or more Soldering area Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ GP1S093HCZ Electro-optical Characteristics Parameter Forward voltage Input Reverse current Output Collector dark current Collector current Transfer Collector-emitter saturation voltage characteRise time ristics Response time Fall time Symbol VF IR ICEO IC VCE(sat) tr tf Fig.1 Forward Current vs. Ambient Temperature 120 50 100 40 30 20 10 0 25 50 75 85 Ptot P, Pc 80 60 40 20 0 -25 100 0 Fig.3 Forward Current vs. Forward Voltage 75 85 100 VCE=5V Ta=25C 1.0 0.9 -25C 0C Collector current IC (mA) Forward current IF (mA) 50 Fig.4 Collector Current vs. Forward Current 100 +50C 25 Ambient temperature Ta (C) Ambient temperature Ta (C) +25C V s s Fig.2 Power Dissipation vs. Ambient Temperature 60 0 -25 (Ta=25C) Unit V A nA A MAX. 1.4 10 100 400 0.4 150 150 TYP. 1.2 - - - - 50 50 - 100 - - - Power dissipation P, Pc, Ptot (mW) Forward current IF (mA) MIN. - - Conditions IF=20mA VR=3V VCE=20V VCE=5V, IF=5mA IF=10mA, IC=40A VCE=5V, IC=100A RL=1 000 +75C 10 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 Forward voltage VF (V) 3 0 2 4 6 8 10 12 14 Forward current IF (mA) 16 18 20 GP1S093HCZ Fig.5 Collector Current vs. Collector-emitter Voltage 120 Ta=25C 3.0 IF=5mA VCE=5V 110 100 2.7 2.4 IF=50mA IF=40mA Relative collector current (%) Collector current IC (mA) Fig.6 Relative Collector Current vs. Ambient Temperature 2.1 1.8 IF=30mA 1.5 IF=20mA 1.2 0.9 IF=10mA IF=5mA 0.6 2 3 4 70 60 50 40 30 10 0 -25 0.0 1 80 20 0.3 0 90 5 6 7 8 9 10 0 Collector-emitter voltage VCE (V) 10-6 IF=10mA IC=40A 0.18 75 VCE=20V 5 0.16 2 0.14 0.12 0.10 0.08 10-7 5 2 10-8 5 2 10-9 5 0.06 2 0.04 -25 0 25 50 10-10 75 0 25 Ambient temperature Ta (C) 1000 100 VCE=5V IC=100A Ta=25C 75 100 Fig.10 Test Circuit for Response Time VCC RD Input RL Output Input Output 10% tf tr 10 td tr td ts 1 0.1 50 Ambient temperature Ta (C) Fig.9 Response Time vs. Load Resistance Response time (s) 50 Fig.8 Collector Dark Current vs. Ambient Temperature Collector dark current ICEO (A) Collector-emitter saturation voltage VCE (sat) (V) Fig.7 Collector - emitter Saturation Voltage vs. Ambient Temperature 0.20 25 Ambient temperature Ta (C) 1 10 Load resistance RL (k) 100 ts tf 90% GP1S093HCZ Fig.11 Relative Collector Current vs. Shield Distance (1) Fig.12 Relative Collector Current vs. Shield Distance (2) 100 90 IF=5mA VCE=5V 90 80 L=0 80 L Relative collector current (%) Relative collector current (%) 100 70 60 50 40 30 20 10 IF=5mA VCE=5V L=0 70 60 L 50 40 30 20 10 0 0 0 0.5 1 1.5 Shield distance L (mm) 2 0 0.5 1 1.5 Shield distance L (mm) 2 Application Circuits NOTICE The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). Contact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication. 115 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Sharp Microelectronics: GP1S093HCZ0F