P r o d u c t D a t a
IPL 10530
Integrated Photodiode
Amplifiers
Photodiode detectors
with transimpedance amplifiers
•Fully-integrated
construction
•High interference
rejection
•Low thermal drift
•Analogue amplified
voltage output
•Range of devices
to suit applications
in process
monitoring,
environmental
monitoring and
general industries
IPL 10530
Integrated Photodiode Amplifiers
100%
Blue/UV Enhanced Silicon
Standard Silicon
200 300 400 500 600 700 800 900
Wavelength (nm) Wavelength (nm)
1000 1100
80
60
40
20
100%
10
20
30
40dB
200 300 400 500 600 700 800 900 1000 1100
80
60
40
20
Silicon Relative Spectral Response Normalised Response of Typical Filters
Frequency Response
10530E
10530D
10530C
10530A
1 10 100
NIR Bandpass
Visible Bandpass
Eye Response
VISIBLE NEAR INFRA-RED (NIR)
ULTRA VIOLET (UV) VISIBLE NEAR INFRA-RED (NIR)
ULTRA VIOLET (UV)
Frequency (KHz)
IPL 10530 Integrated Photodiode Amplifiers are a
family of light-sensitive detectors, providing a voltage
output proportional to the incident light level. The
devices will operate from single or dual rail power
sources, allowing simple interfacing with logic circuits
or voltage comparators.
IPL Photodiode Amplifiers consist of silicon
photodiodes close-coupled to amplifiers. These
are mounted on ceramic substrates and
hermetically sealed within T05 type metal packages to
give exceptional rejection of electrical noise
in arduous environments. This family provides various
gain/bandwidth options to suit a wide
range of applications.
Applications
The IPL 10530 range of Integrated Photodiode
Amplifiers provide positive output voltage for
increased light levels. These devices are especially
suited to low light level applications, or those
where high sensitivity or high interference rejection
is required.
Ideal for use with the IPL range of Self-Monitoring
Emitters, these devices provide the complete solution
for the monitoring of particulate pollution in
liquids and gases, water turbidity measurement
or gas detection by virtue of spectral absorption
bands. Gas pollution sensing, obscuration or
“clouding” (nephelometry) techniques are alternative,
proven applications.
Amplifier Options
Standard feedback configurations are available to
provide high sensitivity and high speed in various
combinations. Undercompensated versions are
available for sensitive pulse detection. Where feasible,
IPL will manufacture to custom requirements.
Filter Options
Eye response (BG18) or N.I.R. Bandpass (RG850). Many
other filter options are available upon request.
P r o d u c t D a t a
2V 20 s
2V 20 s
500
mV
Vcc=±15v
Maximum Offsets for
Unselected 10530A, C & D
10530D (Available upon request)
Vcc=±5v
Vcc=±5v
400
300
200
100
10
0.02000.0000 0.0400 0.0600 0.0800 0.1000 0.1200 0.1400 0.1600
20 30 40 50 60 70 80 90
0° 10°
Lens
Window
Relative Response
20°
30°
40°
40
20
60
80
100%
Polar Response
Pulse Response
10530A
10530D
Dark Voltage Offset v Temperature
10°
20°
30°
40°
Temperature (°C)
Illumination (W/cm2)
Amplifier
Output (V)
CAW
AAL
EAW
DAW
AAW
DAL
CAL
EAL
HAL
Transfer Curves
Lens and Window Options
Devices are supplied in TO5 cans with flat or lensed
windows. Either window option can be provided with
integral filters. Typical filters are “eye response” or
IR. Specialist filters such as UV transmissive or
bandpass are also available on request.
14.000
12.000
10.000
8.000
6.000
4.000
2.000
0.000
Typical Characteristics @25°C
P r o d u c t D a t a
Integrated Photomatrix Limited
Paceycombe Way, Poundbury, Dorchester, Dorset, DT1 3SY, UK
Tel:
+44 (0) 1305 263673
Fax:
+44 (0) 1305 263679
E-mail:
sales@ipl-uk.com
Website:
http://www.ipl-uk.com
All characteristics are approximate values. IPL reserve the right to change the product shown on this leaflet in the
interest of improved specification. No responsibility is assumed for the use of information contained herein, nor
for any infringement of patent of rights of others which may result from such use.
3. +Vcc
2. Output Vo
4. -V
1. OV Case
+
–
Ø9.1
Ø8.33
2.1
6.5
25.4
±5.1
Ø0.45
Typ.
5.84
PCD
1.
2.
4.
3.
3. +Vcc
2. Output Vo
4. OV Case
1. -V
+
–
Dimensions (mm) Basic Circuit
Basic Circuit 10530HAL
Pinout
DS-014 ISSUE 2
DETECTORS
HIGH FREQUENCY PULSE GENERAL PURPOSE HIGH GAIN
10530AAL 10530AAW 10530CAL 10530CAW 10530DAL 10530DAW 10530HAL 10530EAL 10530EAW
PARAMETER UNITS
(with lens) (flat window) (with lens) (flat window) (with lens) (flat window) (with lens) (with lens) (flat window)
DC Supply Voltage (Dual Rail) Vcc V ±2 to ±18 ±2 to ±18 ±2 to ±18 ±2 to ±18 ±2 to ±18 ±2 to ±18 ±2 to ±18 ±2 to ±18 ±2 to ±18
DC Supply Voltage (Single Rail) Vcc V +4 to +36 +4 to +36 +4 to +36 +4 to +36 +4 to +36 +4 to +36 +4 to +36 +4 to +36 +4 to +36
Quiescent Current mA 4.0 4.0 4.0 4.0 4.0 4.0 1.6 4.0 4.0
Dissipation (up to 55°C)
(above 55°C derate linearly 6.67mW/°C) mW 630 630 630 630 630 630 630 630 630
Dark Level Noise (RMS) mV 1.0 1.0 1.0 1.0 0.3 0.3 0.3 1.5 1.5
Detector Output Offset (MAX) mV ±5 ±5 ±5 ±5 ±6 ±6 ±5 ±7 ±7
Detector Output Voltage Vo
(LED - Wavelength 880nm)
VµW-1mm-2 8.0 0.8 50.0 5.0 60.0 6.0 5.0 90.0 9.0
Detector Frequency Response (-3dB) KHz 230 230 80 80 12 12 100 62 62
Detector Output Current Sink mA 10 10 10 10 10 10 1 10 10
Source mA 1 1 1 1 1 1 10 1 1
Short Circuit Output Duration s ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞
Temperature Range Operating °C -20 to +80 -20 to +80 -20 to +80 -20 to +80 -20 to +80 -20 to +80 -20 to +85 -20 to +80 -20 to +80
Storage °C -30 to +100 -30 to +100 -30 to +100 -30 to +100 -30 to +100 -30 to +100 -30 to +100 -30 to +100 -30 to +100
Step Response Rise Time µs 2.0 2.0 4.5 4.5 40 40 1 6.0 6.0
10% - 90% Fall TIme µs 1.5 1.5 4.2 4.2 40 40 7 5.5 5.5
Saturation @Peak Wavelength V Vcc-2.0 Vcc-2.0 Vcc-2.0 Vcc-2.0 Vcc-2.0 Vcc-2.0 Vcc-2.0 Vcc-2.0 Vcc-2.0
Photodiode Active Area (mm2) 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75
