Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Roof-Style | 2.5 mm²
- 1 -
General ordering data
Order No. 1706010000
Part designation ZDU 2.5-2/3AN
Version Feed-through terminal, 2.5 mm², Tension clamp
connection, Wemid, dark beige, TS 35
EAN 4008190915377
Qty. 100 pc(s).
Product notes
Note, ordering data The rated voltage is reduced to 400 V when using
the cross-connection.
Note, technical data 2.5 mm² flexible conductors with wire end ferrules
are crimped with the Weidmüller PZ 6/5 crimping
tool.
Product description The compact terminal range for conductor cross-
sections 0.13 to 16 mm²
Note, accessories The rated voltage is reduced to 250 V when using
the shield bus LS 2.8 (1056400000).
PT OKIECEx/ATEX rating data
EU-type examination certificate KEMA97ATEX4677U
Download, German KEMA97ATEX4677U_d.pdf
Download English KEMA97ATEX4677U_e.pdf
IECEx Certificate of Conformity IECEXULD05.0009U
Download IECEXULD05.0009U_e.pdf
ATEX voltage 550 V
ATEX current 21 A
ATEX conductor cross-section 2.5 mm²
IECEx voltage 550 V
IECEx current 20 A
IECEx conductor cross-section 2.5 mm²
Voltage when using cross-connections CrossConnectionGuide.pdf
Operating temperature range Einsatztemperaturbereich siehe EG-
Baumusterprüfbescheinigung/IECEx-Certificate of
Conformity
Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Roof-Style | 2.5 mm²
- 2 -
PT OKIECEx/ATEX rating data
Marking EN 60079-7 Ex e II
Marking ATEX Directive 94/9/EC Ex II 2 G D
Additional technical data
Colour of insulating material dark beige
Connection direction Inclined / angled
End plate required Yes
Explosion-tested version "Ex e" Yes
Installation advice TS 35
Insulating material Wemid
Levels cross-connected internally No
No. of identical terminals 1
No. of levels 1
No. of terminal strips per level 3
Open sides right
Operating temperature range - 50 °C, + 120 °C
Product family Z-series
Type of connection Tension clamp connection
Type of mounting Snap-on
UL 94 flammability rating of insulation material V-0
Version Feed-through terminal
CSA rating data
Voltage (CSA) 600 V
CSA current 23 A
Min. cross-section (CSA) AWG 30
Max. cross-section (CSA) AWG 12
Conductors for clamping (additional
connection)
Flexible with ferrule, min. (DIN 46228 pt 1) 0.5 mm²
Flexible with ferrule, max. (DIN 46228 pt 1) 2.5 mm²
Conductors for clamping (rated connection)
Clamping range, min. 0.13 mm²
Clamping range, max. 4 mm²
Type of connection Tension clamp connection
2nd type of connection clamped
Connection direction Inclined / angled
No. of connections 3
Stripping length 10 mm
Blade size 0.6 x 3.5 mm
Gauge to IEC 60947-1 A2
Solid, min. 0.5 mm²
Solid, max. 4 mm²
Flexible, min. 0.5 mm²
Flexible, max. 2.5 mm²
Flexible with ferrule, min. (DIN 46228/1) 0.5 mm²
Flexible with ferrule, max. (DIN 46228/1) 2.5 mm²
Flexible, min., ferrule with plastic collar (DIN
46228 pt 4)
0.5 mm²
Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Roof-Style | 2.5 mm²
- 3 -
Conductors for clamping (rated connection)
Flexible, max., ferrule with plastic collar (DIN
46228 pt 4)
1.5 mm²
AWG conductor size, min. AWG 26
AWG conductor size, max. AWG 12
AWG conductor size, min. 0.13 mm²
AWG conductor size, max. 3.31 mm²
Dimensions
Width 5.1 mm
Height of lowest version 44 mm
Length 50.5 mm
TS 35 offset 25.5 mm
Rating data
Rated cross-section 2.5 mm²
Rated voltage 800 V
Rated impulse voltage 8 kV
Rated current 24 A
Standards IEC 60947-7-1
Current with max. conductor 24 A
Pollution severity 3
UL rating data
Voltage (UL) 600 V
Current (UL) 23 A
Min. cross-section (UL) AWG 26
Max. cross-section (UL) AWG 12
Approvals
Approvals institutes
Downloads
STEP 1706010000_25718_ZDU_2.5_2_3AN_STP.stp
Classifications
eClass 4.1 27-14-11-20
eClass 5.0 27-14-11-20
eClass 5.1 27-14-11-20
Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Roof-Style | 2.5 mm²
- 4 -
Similar products
Order No. Part designation Version
1790990000 ZDK 2.5-2 Modular terminal, 2.5 mm², Tension clamp connection, Wemid, dark
beige, TS 35
1791000000 ZDK 2.5-2 BL Modular terminal, 2.5 mm², Tension clamp connection, Wemid, blue,
TS 35
1791470000 ZDK 2.5-2 DB+BR Modular terminal, 2.5 mm², Tension clamp connection, Wemid, dark
beige, TS 35
1904970000 ZDK 2.5-2/N/L Modular terminal, 2.5 mm², Tension clamp connection, Wemid,
beige, TS 35
1791030000 ZDK 2.5-2V Modular terminal, 2.5 mm², Tension clamp connection, Wemid, dark
beige, TS 35
1791040000 ZDK 2.5-2V BL Modular terminal, 2.5 mm², Tension clamp connection, Wemid, blue,
TS 35
1772060000 ZDU 2.5-2 Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
dark beige, TS 35
1772070000 ZDU 2.5-2 BL Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
blue, TS 35
1772080000 ZDU 2.5-2 OR Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
Orange, TS 35
1706040000 ZDU 2.5-2/3AN BL Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
blue, TS 35
1706050000 ZDU 2.5-2/3AN OR Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
Orange, TS 35
1706060000 ZDU 2.5-2/4AN Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
dark beige, TS 35
1706070000 ZDU 2.5-2/4AN BL Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
blue, TS 35
1706080000 ZDU 2.5-2/4AN OR Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
Orange, TS 35
