SBL1040CK thru 1060CK REVERSE VOLTAGE - 40 to 60 Volts FORWARD CURRENT - 10 Amperes SCHOTTKY BARRIER RECTIFIERS FEATURES * Metal of silicon rectifier, majority carrier conduction * Guard ring for transient protection * Low power loss, high surge & efficiency * For use in low voltage, high frequency inverters, Dim A b c D D1 D2 E e L L1 L2 h V free wheeling, and polarity protection applications MECHANICAL DATA * Case: TO-251-S molded plastic * Plastic package has UL flammability classification 94V-0 * Moisture sensitivity: level 1 per J-STD-020D * Lead Free Finish, RoHS Compliant * Polarity: As marked on the body IPAK-S Min. Max. 2.2 2.4 0.66 0.86 0.46 0.58 6.5 6.7 5.1 5.46 4.830 REF. 6 6.2 2.186 2.386 10.4 11 3.500 REF. 1.600 REF 1.1 1.3 0 0.3 5.350 REF. All Dimensions in millimeter 1 3 2 Maximum Ratings & Electrical Characteristics @ TA = 25 unless otherwise specified Characteristic Symbol SBL1040CK SBL1045CK SBL1060CK Maximum Recurrent Peak Reverse Voltage VRRM 40 45 60 Maximum RMS Voltage VRMS 28 32 42 Maximum DC Blocking Voltage VDC 40 45 60 Maximum Average Forward Rectified Forward Current SBL1040CK@ TC = 85 SBL1045CK@ TC = 85 SBL1060CK@ TC = 110 Units V IF(AV) 10 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 100 A Reverse Breakdown Voltage IR = 100uA VBR Maximum Forward Voltage IF = 5A VF Maximum DC Reverse Current at Rated DC Blocking Voltage 40 45 0.55 60 V 0.75 V 0.2 20 IR mA Thermal Resistance, Junction to Case RJC 7 5 /W Thermal Resistance, Junction to Lead RJL 6 4 /W Thermal Resistance, Junction to Ambient RJA Operating Temperature Range Storage Temperature Range TSTG 125 150 -55~+150 REV. 1, Jul-2011, KTHA23 Note : (1) (2) TJ /W 80 300us Pulse Width, 2% Duty Cycle. Measured at 1.0MHz and applied reverse voltage of 4.0 VDC. RATING AND CHARACTERISTIC CURVES SBL1040CK thru SBL1060CK FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 100 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FO RWARD CURRENT, (A) 12 10 8 With heatsink_50*50*2 mm copper plate, Rth JC=7/W 6 Without heatsink 50*50*2 mm copper plate, Rth JC=5/W 4 2 SBL1040 / 45CK SBL1060CK 80 60 40 20 0 0 1 0 25 50 75 100 125 10 150 100 NUMBER OF CYCLES AT 60Hz O CASE TEMPERATURE, ( C) FIG.3- TYPICAL FORWORD CHARACTERISTICS FIG.4- TYPICAL REVERSE CHARACTERISTICS 1 SBL1040 / 45 CK 25 SBL1060CK 25 SBL1040 / 45 CK 100 SBL1060CK 100 10 CURRENT, (uA) IR, INSTANTANEOUS REVERSE 10 SBL1040 / 45 CK 25 SBL1060CK 25 SBL1040 / 45 CK 100 SBL1060CK 100 0.1 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0.001 0 V F, INSTANTANEOUS FORWA RD VOLTAGE, (V) 20 40 60 80 100 VR , PERCENTAGE OF RATED REVERSE VOLTAGE, (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 1000 CAPACITANCE, (pF) CURRENT, (A) IF, INSTANTANEOUS FORWARD 100 100 SBL1040 / 45CK SBL1060CK 10 1 10 REVERSE VOLTAGE, (V) 100 120 Legal Disclaimer Notice SBL1040CK thru SBL1060CK Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.