Features Regulated Converters * * * * * * 4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Over Current and Over Voltage Protection No Minimum Load Required Description DC/DC Converter RP12-AW 12 Watt 3 DIP24/SMD Single & Dual Output 3Y The RP12-AW wide range input DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance. wa EAR rranty Selection Guide Part Number RP12-243.3SAW(3) RP12-2405SAW(3) RP12-2412SAW(3) RP12-2415SAW(3) RP12-483.3SAW(3) RP12-4805SAW(3) RP12-4812SAW(3) RP12-4815SAW(3) RP12-2405DAW(3) RP12-2412DAW(3) RP12-2415DAW(3) RP12-4805DAW(3) RP12-4812DAW(3) RP12-4815DAW(3) Input Voltage Range [VDC] 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 9-36 9-36 9-36 18-75 18-75 18-75 Output Voltage [VDC] 3.3 5.1 12 15 3.3 5.1 12 15 5 12 15 5 12 15 Output Current [mA] 3500 2400 1000 800 3500 2400 1000 800 1200 500 400 1200 500 400 Input(1) Efficiency(1) Current typ. [mA] [%] 573 84 575 87 575 87 575 87 286 84 293 87 287 87 284 88 595 84 575 87 575 87 294 85 287 87 287 87 Max. Capacitive Load(2) [F] 2000 2000 430 300 2000 2000 430 300 1250 200 120 1250 200 120 Notes: Note1: Maximum value at nominal input voltage and full load. Note2: Test by minimum Vin and constant resistor load. E196683 UL60950-1 Certified Model Numbering RP12-__ __ _AW/_ Input Voltage Package(3) Output Voltage Single or Dual Ordering Examples: RP12-2412SAW/SMD = 24V Input, 12V Output, Single, SMD Package. Notes: Note3: no suffix for standard package (DIP24), add suffix SMD" for SMD package www.recom-power.com REV.: 1/2016 PD-1 RP12-AW DC/DC Converter Specifications Series measured at Ta = 25C, nominal input voltage, full load otherwise noted BASIC CHARACTERISTICS Parameter Input Voltage Range Condition Min. Typ. Max. nom. Vin = 24V nom. Vin = 48V 9VDC 18VDC 24VDC 48VDC 36VDC 75VDC Vin = 24V DC-DC ON DC-DC OFF 8VDC Vin = 48V DC-DC ON DC-DC OFF 16VDC Under Voltage Lockout (UVLO) 9VDC 18VDC Input Filter Pi-Type Input Reflected Ripple Current nominal Vin and full load Input Surge Voltage Vin = 24V, 100ms max. Vin = 48V, 100ms max. 20mAp-p 50VDC 100VDC Power up Remote ON/OFF Start-up time 450ms 5ms Operating Frequency Range 360kHz Minimum Load of full load 400kHz 20MHz bandwidth Ripple and Noise 85mVp-p DC-DC ON Positive Logic DC-DC OFF DC-DC OFF Remote ON/OFF (4) Input current of Remote pin (CTRL) 440kHz 0% Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA DC-DC ON -0.5mA +0.5mA Notes: Note4: The ON/OFF control pin voltage is referenced to -Vin pin. RP12-2405SAW Efficiency vs. Output Current Efficiency vs. Input Voltage 95 95 90 90 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 9Vin 24Vin 36Vin 50 45 40 10 20 30 40 50 60 70 80 90 85 80 75 70 65 100 9 12 15 RP12-4805SAW 12 18 21 24 27 30 36 60 66 75 Input Voltage [VDC] Output Current [%] Efficiency vs. Output Current Efficiency vs. Input Voltage 95 95 90 90 80 75 Efficiency [%] Efficiency [%] 85 70 65 60 55 18Vin 48Vin 75Vin 50 45 40 10 20 30 40 50 60 70 80 90 80 75 70 65 100 Output Current [%] PD-2 85 18 24 30 36 42 48 54 Total Input Voltage [%] REV.: 1/2016 www.recom-power.com RP12-AW DC/DC Converter Specifications Series measured at Ta = 25C, nominal input voltage, full load otherwise noted REGULATIONS Parameter Condition Output Voltage Accuracy Value 1.2% Line Voltage Regulation low line to high line at full load Load Voltage Regulation Cross Regulation 0% load to 100% load Single DIP typ Dual 0.5% 1.0% 0% load to 100% load Single SMD Dual 1.0% 1.0% asymmetrical 25%<>100% load Transient Response recovery time 0.2% 25% load step change 5% 250s typ. PROTECTIONS Parameter Condition Short Circuit Protection (SCP) Over Voltage Protection (OVP) Over Load Protection (OLP) 3.3Vout 5.1Vout Zener Diode Clamp 12Vout 15Vout % of Iout rated Isolation Voltage 3.9VDC 6.2VDC 15VDC 18VDC 150% typ. I/P to O/P DIP24 I/P (O/P) to case 1.6kVDC/1 minute 1.6kVDC/1 minute I/P to O/P I/P (O/P) to case 500VDC 1.6kVDC/1 minute 1.0kVDC/1 minute 1G min. SMD Isolation Resistance Value continuous, automatic recovery Isolation Capacitance 1500pF max. Notes: Note5: This power module is not internally fused. An input line fuse must always be used. ENVIRONMENTAL Parameter Condition 3.3Vout, 5Vout without derating with derating -40C to +64C -40C to +105C Others without derating with derating -40C to +70C -40C to +100C Operating Temperature Range Maximum Case Temperature +105C Temperature Coefficient Thermal Impedance Value 0.02%/C max. Natural convection (20LFM) Operating Humidity 20C/Watt 5% - 95% RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF MIL-HDBK-217F Bellcore TR-NWT-000332(6) 2087 x 103 hours 2350 x 103 hours continued on next page www.recom-power.com REV.: 1/2016 PD-3 RP12-AW DC/DC Converter Specifications Series measured at Ta = 25C, nominal input voltage, full load otherwise noted Derating Graph(7) RP12-2415SAW Output Power [%] 100 80 60 40 20 0 -40 Notes: Note6: Note7: -20 0 20 40 60 70 80 100 120 Ambient Temperature [C] BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). Derating graphs are valid only for the shown part numbers. If you need detailed derating- information about a part number not shown here please contact our technical support service at techsupportAT@recom-power.com. SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number UL General Safety Standard UL60950-1 1st Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 E196683 EMC Compliance EMI Standard(8) ESD Radiated Immunity Fast Transient (9) Surge(9) Conducted Immunity Condition Standard / Criterion with external filter EN55022, Class A or B Air 8kV and Contact 6kV 10 V/m 2kV 1kV 10 Vr.m.s EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A C2 Fuse +VOUT +V LOAD IN Input Notes: DC C1 Note8: The standard modules meet EMI Class A or Class B with external components, see filter suggestions below. Note9: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. DCThe filter capacitor Recom -V suggests: Nippon chemi-con KY series, 220F/100V. -V OUT IN C3 EMC Filtering Class A C2 Fuse DC DC C1 LOAD C1 +VOUT +VIN Input COM DC DC -VOUT -VOUT -VIN -VIN C3 C3 continued on next page C2 REV.: 1/2016 Fuse +VOUT +VIN Input DC C1 LOAD PD-4 LOAD +VOUT +VIN LOAD Fuse Input C2 www.recom-power.com RP12-AW DC/DC Converter L1 measured at Ta = 25C, nominal input voltage, full load otherwise notedFuse DC C2/C3 RP12-24xxS_DA 3.3F/50V 1210 MLCC 1000pF/2kV 1206 MLCC RP12-48xxS_DA 1.5F/100V 1812 MLCC 1000pF/2kV 1206 MLCC C2 LOAD C1 C1 EMC Filtering Class B +VOUT +VIN Input MODEL C3 DC -VOUT -VIN C4 C3 C3 Input DC C1 LOAD C2 +VOUT +VIN Input DC C1 L1 Fuse +VOUT +VIN C2 COM DC DC -VOUT -VOUT -VIN -VIN C4 C1 Input C1 +VIN 3.3F/50V+V 1812 MLCC DC C3/C4 L1 N/A 1000pF/2kV 1206 MLCC CMC: 325H ref: WE 744290321 ref.: CMC-06 2.2F/100V 1812 MLCC 1000pF/2kV 1206 MLCC CMC: 145H ref: WE 74482210002 ref.: CMC-07 OUT C2 LOAD RP12-24xxS_DA C2 COM RP12-48xxS_DA LOAD Fuse C4 C3 MODEL L1 LOAD L1 Fuse LOAD Specifications Series DC 2.2F/100V -V 1812 MLCC OUT -VIN C4 DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper Non-conductive black plastic Epoxy (UL94-V0) Package Dimensions (LxWxH) Package Weight DIP Dimension Drawing (mm) 31.8 DIP SMD 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 11.2mm DIP SMD 18g 20g 20.3 Pin Connections O 0.5 2.0 5.08 3.8 10.20 Pin # 15.20 20.32 2.54 1 2 3 9 11 Bottom View 23 22 16 14 continued on next page www.recom-power.com REV.: 1/2016 Single Dual 1 Ctrl Ctrl 2 -Vin -Vin 3 -Vin -Vin 9 NC Com 11 NC -Vout 14 +Vout +Vout 16 -Vout Com 22 +Vin +Vin 23 +Vin +Vin Pin Pitch Tolerance 0.25mm Pin Dimension Tolerance 0.1mm XX.X 0.5mm XX.XX 0.25mm NC = No Connection PD-5 RP12-AW DC/DC Converter Specifications Series measured at Ta = 25C, nominal input voltage, full load otherwise noted SMD Dimension Drawing (mm) Pin Connections 10.9 11.2 32.0 Pin # Pin area 1.0 x 0.50 1 2 3 4 5 9 10 11 22 21 16 20 15 Ctrl -Vin -Vin 3 -Vin -Vin 9 NC Com 1.60 Top View 25.4 20.3 23 Ctrl 2 12 Bottom View 24 1 25.4 2.54 0.50 14 Dual 20.3 2.40 10.16 2.54 Single 11 NC -Vout 14 +Vout +Vout 16 -Vout Com 22 +Vin +Vin 23 +Vin +Vin Others NC NC Pin Pitch Tolerance 0.25mm Pin Dimension Tolerance 0.1mm XX.X 0.5mm XX.XX 0.25mm NC = No Connection 13 27.94 PACKAGING INFORMATION Parameter Type Value Packaging Quantity Tube 7pcs. Storage Temperature Range -55C to +125C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM's explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. PD-6 REV.: 1/2016 www.recom-power.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: RECOM: RP12-2405DAW RP12-2405DAW/SMD RP12-2405SAW RP12-2405SAW/SMD RP12-2412DAW RP122412DAW/SMD RP12-2412SAW RP12-2412SAW/SMD RP12-2415DAW RP12-2415DAW/SMD RP12-2415SAW RP12-2415SAW/SMD RP12-243.3SAW RP12-243.3SAW/SMD RP12-4805DAW RP12-4805DAW/SMD RP124805SAW RP12-4805SAW/SMD RP12-4812DAW RP12-4812DAW/SMD RP12-4812SAW RP12-4812SAW/SMD RP12-4815DAW RP12-4815DAW/SMD RP12-4815SAW RP12-4815SAW/SMD RP12-483.3SAW RP12483.3SAW/SMD