RP12-243.3SAW - RECOM Power - Datasheet.Directory

Features

Regulated

Converters

• 4:1 Wide Input Voltage Range

• 1.6kVDC Isolation

• UL Certiﬁed

• Efﬁciency up to 88%

• Over Current and Over Voltage Protection

• No Minimum Load Required

PD-1

REV.: 1/2016www.recom-power.com

DC/DC Converter

Description

The RP12-AW wide range input DC/DC converters are certiﬁed to UL 60950-1 and cUL 60950-1.

This makes them ideal for all telecom and industrial applications where approved safety standards

are required. The DIP24 package is available in both pinned and SMD case styles and meets military

standards for thermal shock and vibration tolerance.

E196683

12 Watt

DIP24/SMD

Single & Dual

Output

RP12-AW

Selection Guide

Part Number Input Output Output Input(1) Efﬁciency(1) Max. Capacitive

Voltage Range Voltage Current Current typ. Load(2)

[VDC] [VDC] [mA] [mA] [%] [µF]

RP12-243.3SAW(3) 9-36 3.3 3500 573 84 2000

RP12-2405SAW(3) 9-36 5.1 2400 575 87 2000

RP12-2412SAW(3) 9-36 12 1000 575 87 430

RP12-2415SAW(3) 9-36 15 800 575 87 300

RP12-483.3SAW(3) 18-75 3.3 3500 286 84 2000

RP12-4805SAW(3) 18-75 5.1 2400 293 87 2000

RP12-4812SAW(3) 18-75 12 1000 287 87 430

RP12-4815SAW(3) 18-75 15 800 284 88 300

RP12-2405DAW(3) 9-36 ±5 ±1200 595 84 ±1250

RP12-2412DAW(3) 9-36 ±12 ±500 575 87 ±200

RP12-2415DAW(3) 9-36 ±15 ±400 575 87 ±120

RP12-4805DAW(3) 18-75 ±5 ±1200 294 85 ±1250

RP12-4812DAW(3) 18-75 ±12 ±500 287 87 ±200

RP12-4815DAW(3) 18-75 ±15 ±400 287 87 ±120

UL60950-1 Certiﬁed

Input Voltage

Output Voltage

Single or Dual

RP12-__ __ _AW/_

Package(3)

Ordering Examples:

RP12-2412SAW/SMD = 24V Input, 12V Output, Single, SMD Package.

Model Numbering

Notes:

Note1: Maximum value at nominal input voltage and full load.

Note2: Test by minimum Vin and constant resistor load.

Notes:

Note3: no sufﬁx for standard package (DIP24), add sufﬁx „SMD“ for SMD package

PD-2 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP12-AW

Series

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage Range nom. Vin = 24V

nom. Vin = 48V

9VDC

18VDC

24VDC

48VDC

36VDC

75VDC

Under Voltage Lockout (UVLO)

Vin = 24V DC-DC ON

DC-DC OFF 8VDC

9VDC

Vin = 48V DC-DC ON

DC-DC OFF 16VDC

18VDC

Input Filter Pi-Type

Input Reﬂected Ripple Current nominal Vin and full load 20mAp-p

Input Surge Voltage Vin = 24V, 100ms max.

Vin = 48V, 100ms max.

50VDC

100VDC

Start-up time Power up

Remote ON/OFF

450ms

5ms

Operating Frequency Range 360kHz 400kHz 440kHz

Minimum Load of full load 0%

Ripple and Noise 20MHz bandwidth 85mVp-p

Remote ON/OFF (4) Positive Logic DC-DC ON

DC-DC OFF

Open or 3.0V < Vr < 12V

Short or 0V < Vr < 1.2V

Input current of Remote pin (CTRL) DC-DC OFF 2.5mA

DC-DC ON -0.5mA +0.5mA

Notes:

Note4: The ON/OFF control pin voltage is referenced to -Vin pin.

Efﬁciency vs. Output Current

Efﬁciency vs. Input Voltage

9Vin

24Vin

36Vin

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

18Vin

48Vin

75Vin

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

Efficiency [%]

Input Voltage [VDC]

15 12 21 27 3612 18 24 30

Efficiency [%]

Total Input Voltage [%]

30 36 48 60 7524 42 54 66

RP12-2405SAW

RP12-4805SAW

DC/DC Converter

PROTECTIONS

Parameter Condition Value

Short Circuit Protection (SCP) continuous, automatic recovery

Over Voltage Protection (OVP) Zener Diode Clamp

3.3Vout

5.1Vout

12Vout

15Vout

3.9VDC

6.2VDC

15VDC

18VDC

Over Load Protection (OLP) % of Iout rated 150% typ.

Isolation Voltage

DIP24 I/P to O/P

I/P (O/P) to case

1.6kVDC/1 minute

SMD I/P to O/P

I/P (O/P) to case

1.6kVDC/1 minute

1.0kVDC/1 minute

Isolation Resistance 500VDC 1GΩ min.

Isolation Capacitance 1500pF max.

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

REGULATIONS

Parameter

Condition

Value

Output Voltage Accuracy ±1.2%

Line Voltage Regulation low line to high line at full load ±0.2%

Load Voltage Regulation

0% load to 100% load

DIP typ

Single

Dual

±0.5%

±1.0%

0% load to 100% load

SMD

Single

Dual

±1.0%

Cross Regulation asymmetrical 25%<>100% load ±5%

Transient Response recovery time 25% load step change 250μs typ.

RP12-AW

Series

PD-3

REV.: 1/2016www.recom-power.com

ENVIRONMENTAL

Parameter Condition

Value

Operating Temperature Range

3.3Vout, ±5Vout without derating

with derating

-40°C to +64°C

-40°C to +105°C

Others without derating

with derating

-40°C to +70°C

-40°C to +100°C

Maximum Case Temperature +105°C

Temperature Coefﬁcient ±0.02%/°C max.

Thermal Impedance Natural convection (20LFM) 20°C/Watt

Operating Humidity 5% - 95% RH

Thermal Shock MIL-STD-810F

Vibration MIL-STD-810F

MTBF MIL-HDBK-217F

Bellcore TR-NWT-000332(6)

2087 x 103 hours

2350 x 103 hours

continued on next page

Notes:

Note5: This power module is not internally fused. An input line fuse must always be used.

PD-4 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP12-AW

Series

SAFETY AND CERTIFICATIONS

Certiﬁcate Type (Safety) Report / File Number Standard

UL General Safety E196683 UL60950-1 1st Ed.: 2003

C22.2 No. 60950 1st. Ed.: 2003

EMC Compliance Condition Standard / Criterion

EMI Standard(8) with external ﬁlter EN55022, Class A or B

ESD

Radiated Immunity

Fast Transient (9)

Surge(9)

Conducted Immunity

Air ±8kV and Contact ± 6kV

10 V/m

±2kV

±1kV

10 Vr.m.s

EN61000-4-2, Criteria A

EN61000-4-3, Criteria A

EN61000-4-4, Criteria A

EN61000-4-5, Criteria A

EN61000-4-6, Criteria A

continued on next page

Notes:

Note8: The standard modules meet EMI Class A or Class B with external components, see ﬁlter suggestions below.

Note9: An external input ﬁlter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The ﬁlter capacitor Recom

suggests: Nippon chemi-con KY series, 220μF/100V.

Notes:

Note6: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground ﬁxed and

controlled environment).

Note7: Derating graphs are valid only for the shown part numbers. If you need detailed derating-

information about a part number not shown here please contact our technical support

service at techsupportAT@recom-power.com.

-40 60

80 100 120

200-20

100

Ambient Temperature [°C]

Output Power [%]

RP12-2415SAW

Derating Graph(7)

EMC Filtering Class A

Input

Fuse

+VIN

+VOUT

-VOUT

-VIN

LOAD

Fuse

+VIN

+VOUT

COM

-VOUT

-VIN

LOADLOAD

Input

Fuse

+VIN

+VOUT

-VOUT

-VIN

LOAD

Fuse

+VIN

+VOUT

COM

-VOUT

-VIN

LOADLOAD

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP12-AW

Series

PD-5

REV.: 1/2016www.recom-power.com

MODEL C1 C2/C3

RP12-24xxS_DA 3.3μF/50V

1210 MLCC

1000pF/2kV

1206 MLCC

RP12-48xxS_DA 1.5μF/100V

1812 MLCC

1000pF/2kV

1206 MLCC

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

EMC Filtering Class B

MODEL C1 C2 C3/C4 L1

RP12-24xxS_DA 3.3μF/50V

1812 MLCC N/A 1000pF/2kV

1206 MLCC

CMC: 325μH

ref: WE 744290321

ref.: CMC-06

RP12-48xxS_DA 2.2μF/100V

1812 MLCC

2.2μF/100V

1812 MLCC

1000pF/2kV

1206 MLCC

CMC: 145μH

ref: WE 74482210002

ref.: CMC-07

DIMENSIONS and PHYSICAL CHARACTERISTICS

Parameter Type Value

Material

Case

Base

Potting

Nickel coated copper

Non-conductive black plastic

Epoxy (UL94-V0)

Package Dimensions (LxWxH) DIP

SMD

31.8 x 20.3 x 10.2mm

32.0 x 20.3 x 11.2mm

Package Weight DIP

SMD

18g

20g

continued on next page

DIP Dimension Drawing (mm)

20.3

3.8

10.20

31.8

Ø 0.5

20.32

2.0

2 3

Bottom View

9 11

23 22 16 14

5.08 15.20

2.54

Pin Connections

Pin # Single Dual

1 Ctrl Ctrl

2 -Vin -Vin

3 -Vin -Vin

9 NC Com

11 NC -Vout

14 +Vout +Vout

16 -Vout Com

22 +Vin +Vin

23 +Vin +Vin

Pin Pitch Tolerance ±0.25mm

Pin Dimension Tolerance ±0.1mm

XX.X ± 0.5mm

XX.XX ± 0.25mm

NC = No Connection

PD-6 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP12-AW

Series

PACKAGING INFORMATION

Parameter Type Value

Packaging Quantity Tube 7pcs.

Storage Temperature Range -55°C to +125°C

Storage Humidity 5% - 95% RH

The product information and speciﬁcations are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written

consent. A safety-critical application is deﬁned as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inﬂict bodily harm or damage property. The buyer

shall indemnify and hold harmless RECOM, its afﬁliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.

SMD Dimension Drawing (mm)

10.9

25.4

11.2

20.3

0.50 1.60

2.40

32.0

27.94

20.3

25.4

10.16

2.54

1.0 x 0.50

1 4 5 9 10 11 1232

24 21 20

Bottom View Top View

16 15 14 132223

Pin area 2.54

Pin Connections

Pin # Single Dual

1 Ctrl Ctrl

2 -Vin -Vin

3 -Vin -Vin

9 NC Com

11 NC -Vout

14 +Vout +Vout

16 -Vout Com

22 +Vin +Vin

23 +Vin +Vin

Others NC NC

Pin Pitch Tolerance ±0.25mm

Pin Dimension Tolerance ±0.1mm

XX.X ± 0.5mm

XX.XX ± 0.25mm

NC = No Connection

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

RECOM:

RP12-2405DAW RP12-2405DAW/SMD RP12-2405SAW RP12-2405SAW/SMD RP12-2412DAW RP12-

2412DAW/SMD RP12-2412SAW RP12-2412SAW/SMD RP12-2415DAW RP12-2415DAW/SMD RP12-2415SAW

RP12-2415SAW/SMD RP12-243.3SAW RP12-243.3SAW/SMD RP12-4805DAW RP12-4805DAW/SMD RP12-

4805SAW RP12-4805SAW/SMD RP12-4812DAW RP12-4812DAW/SMD RP12-4812SAW RP12-4812SAW/SMD

RP12-4815DAW RP12-4815DAW/SMD RP12-4815SAW RP12-4815SAW/SMD RP12-483.3SAW RP12-

483.3SAW/SMD