WIMA SMD 2220 Metallisierte Polyester-SMD Kondensatoren mit Becherumhullung Metallized polyester SMD capacitors with plastic box encapsulation Fur allgemeine Anwendungen wie Koppeln, Entkoppeln und Abblocken. Kapazitatsspektrum: 1000 pF - 1,0 mF. Ganzseitige Lotflachen. Gegurtet lieferbar im 12 mm Blistergurt. For general applications e.g. coupling, decoupling and by-pass applications. Capacitance range: 1000 pF - 1.0 mF. Full size soldering surfaces. Available taped and reeled in 12 mm blister pack. Technische Angaben Technical Data Dielektrikum: Polyathylenterephthalat-Folie. Belage: Aluminium, aufmetallisiert. Umhullung: Flammhemmendes Kunststoffgehause, UL 94 V-0, Farbe: Schwarz. Aufdruck: Silber. Temperaturbereich: -55 ) C bis +100 ) C. Prufungen: Nach IEC 60384-19 bzw. EN 132 200. Prufklasse: 55/100/21 nach IEC. Isolationswerte bei +20 C: Dielectric: Polyethylene-terephthalate film. Capacitor electrodes: Vacuum-deposited aluminium. Encapsulation: Flame retardent plastic case, UL 94 V-0, Colour: Black. Marking: Silver. Temperature range: -55) C to +100) C. Test specification: In accordance with IEC 60384-19 and EN 132 200. Test category: 55/100/21 in accordance with IEC. Insulation resistance at +20 C: UN U me 50 V63 V100 V- C 0,33 mF 0,33 mF < C 10 V 3,75 10 3 MV 50 V Mittelwert: 1 104 MV 100 V 1,0 mF 1250 s (MV mF) Mittelwert: 3000 s Nach IEC 60384-19 und EN 132 200 Mezeit: 1 min. Kapazitatstoleranzen: 20 %, 10 %, ( 5 % auf Anfrage). Impulsbelastung: C-Wert pF/mF 1000 0,01 0,033 0,1 0,33 ... ... ... ... ... 6800 0,022 0,068 0,22 1,0 250 V- 35/350 25/250 10/100 5/50 - 40/400 35/350 15/150 10/100 35/350 30/300 20/200 10/100 6/60 bei vollem Spannungshub. Verlustfaktoren bei +20) C: tan d Gemessen bei 1 kHz 10 kHz 100 kHz C 0,1 mF 8 10-3 15 10 -3 30 10 -3 Utest C 0.33 mF 0.33 mF < C 1.0 mF 50 VDC 10 V 3.75 x 103 MV 1250 sec (MV x mF) 63 VDC 50 V Mean value: 1x10 4 MV Mean value: 3000 sec 100 VDC 100 V In accordance with IEC 60384-19 and EN 132 200 Measuring time: 1 min. Capacitance tolerances: 20 %, 10 %, ( 5 % available subject to special enquiry). Maximum pulse rise time: Flankensteilheit V/ms max. Betrieb/Prufung 50 V- 63 V- 100 V- 5/50 2/20 Ur Capacitance pF/mF 1000 0.01 0.033 0.1 0.33 . . . 6800 . . . 0.022 . . . 0.068 . . . 0.22 . . . 1.0 Pulse rise time V/msec max. operation/test 50 VDC 63 VDC 100 VDC 35/350 25/250 10/100 5/50 - 5/50 2/20 35/350 30/300 20/200 10/100 6/60 250 VDC 40/400 35/350 15/150 10/100 for pulses equal to the rated voltage. Dissipation factors at +20 ) C: tan d 0,1 mF < C 1,0 mF 8 10-3 15 10 -3 - 1 kHz 10 kHz 100 kHz C 0.1 mF 8 x 10 -3 15 x 10 -3 30 x 10 -3 0.1 mF < C 1.0 mF 8 x 10 -3 15 x 10 -3 - Temperature characteristics: See graph page 32. Test voltage: 1.6 U r , 2 sec. Voltage derating: A voltage derating factor of 1,25 % per K must be applied from +85) C for DC voltages and from +75 ) C for AC voltages. Resistance to soldering heat: Solder bath temperature max. 260 C. Soldering duration max. 5 sec. Change in capacitance DC/C < 3 %. In accordance with DIN IEC 60068-2-20 (test Tb.)/EN 132 200. Soldering process: Wave soldering and re-flow soldering (see temperature/time graphs page 30). 01-02 Temperaturcharakteristik: Siehe Kurven Seite 32. Prufspannung: 1,6 UN , 2 s. Spannungsderating: Die zulassige Spannung vermindert sich gegenuber der Nennspannung bei Gleichspannungsbetrieb ab +85) C, bei Wechselspannungsbetrieb ab +75) C um 1,25 % je 1 K. Lotwarmebestandigkeit: Temperatur des Lotbades max. 260 C. Lotdauer max. 5 s. Kapazitatsanderung DC/C < 3 %. Prufung: Tb nach DIN IEC 60068-2-20 und EN 132 200. Lottechnik: Wellenlotung und Reflowlotung (siehe Temperatur/Zeitdiagramm Seite 30). at f 18 WIMA SMD 2220 Werteubersicht / General Data 50 VDC/30 VAC * L W H 0.3 0.3 0.3 Kapazitat Capacitance 63 VDC/40 VAC * L W H 0.3 0.3 0.3 100 VDC/63 VAC * L W H 0.3 0.3 0.3 250 VDC/160 VAC * L W H 0.3 0.3 0.3 1000 1500 2200 3300 4700 6800 pF 5.7 5.7 5.7 5.7 5.7 5.7 5 5 5 5 5 5 2.5 2.5 2.5 2.5 2.5 2.5 5.7 5.7 5.7 5.7 5.7 5.7 5 5 5 5 5 5 2.5 2.5 2.5 2.5 2.5 2.5 5.7 5.7 5.7 5.7 5.7 5.7 5 5 5 5 5 5 2.5 2.5 2.5 2.5 2.5 2.5 0.01 0.015 0.022 0.033 0.047 0.068 mF 5.7 5.7 5.7 5.7 5.7 5.7 5 5 5 5 5 5 2.5 2.5 2.5 2.5 2.5 2.5 5.7 5.7 5.7 5.7 5.7 5.7 5 5 5 5 5 5 2.5 2.5 2.5 2.5 2.5 2.5 5.7 5.7 5.7 5 5 5 2.5 3 4 0.1 mF 5.7 5 2,5 5.7 5.1 2.5 4.5 5.7 5.7 5 5 2,5 3 5.7 5.7 5.7 5.7 5.7 5.1 5.1 5.1 5.1 5.1 2.5 2.5 3.5 3.5 4.5 3.5 3 3.5 3.5 4.5 4.5 5.1 5.1 5 5.1 5.1 5.1 5.1 5.7 0.15 0.22 0.33 0.47 0.68 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.1 5.1 4.5 4.5 1.0 mF 5.7 5.1 4.5 * Wechselspannungen: f = 50 Hz; 1,4 U eff Z + U- AC voltage: f = 50 Hz, 1.4 x U rms + UDC U r SMD 2220-N mit kleineren Bauformen. UN 10 Z S SMD 2220-N with smaller dimensions. 1 Gegurtete Ausfuhrung siehe Seite 28. Taped version see page 28. 7 5 3 F 00 p -- 10 F 00 p -- 22 F 00 p -- 47 1 F -- 0.0 22 F -- 0.0 47 F -- 0.0 F -- 0.1 2 F -- 0.2 7 F -- 0.4 F -- 1.0 0.1 7 5 Alle Mae in mm. Dims. in mm. 3 0.01 W 4 H 1.2 0.5 L 4.5 1 3 5 7 10 3 5 7 100 f/MHz 1000 Scheinwiderstand in Abhangigkeit von der Frequenz (Richtwerte). Impedance change with frequency (general guide). 0.5 Klebespalt Bonding slit Lotpadempfehlung. Solder pad recommendation. 01-02 Abweichungen und Konstruktionsanderungen vorbehalten. Rights reserved to amend design data without prior notification. 19