ATC 900 C Series X7R @ Ceramic RF Power Multilayer Capacitors Case C Size + Capacitance Range (.250" x .250") 0.01 MFd to 1 MFd + Low ESR/ESL + Mid-K * Rugged High Reliability Construction ATC, the industry leader, is announcing new improved ESR/ESL performance for the 900 C Series RF Capacitors. This Series exhibits superior volumetric efficiency, providing high levels of capacitance for HF/ RF power applications. Self-encapsulating ceramic construction provides a rugged, hermetic package without the need or liability of external encapsulants. Typical functional applications: Bypass, Coupling and D.C. Blocking. Typical circuit applications: HF/RF Power Amplifiers, Switching Power Supplies, High Frequency SMPS Filters and Medical Equipment. ENVIRONMENTAL TESTS ATC 900 C Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-C-55681 and MIL-C-123. THERMAL SHOCK: MIL-STD-202, Method 107, Condition A. MOISTURE RESISTANCE: MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts D.C. applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125C. 200% WVDC applied. ELECTRICAL AND MECHANICAL SPECIFICATIONS DISSIPATION FACTOR (D.F.): 2.5% max. at 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (T.C.): Less than 0 +15% (-55C to +125C) INSULATION RESISTANCE (IR): 0.01 MFd to 1 MFd 1000 megohms min. @ +25C at rated WVDC. 100 megohms min. @ +125C at rated WVDC. WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2. DIELECTRIC WITHSTANDING VOLTAGE (DWV): Case C: 250% of rated WVDC for 5 secs. AGING EFFECTS: 3% maximum per decade hour. PIEZOELECTRIC EFFECTS: Negligible DIELECTRIC ABSORPTION: 2% typical OPERATING TEMPERATURE RANGE: -55C to +125C (No derating of working voltage). TERMINATION STYLES: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 10 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termina-tion surface of the capacitor. Test per MIL-STD-202, method 211. american technical ceramics one norden lane, huntington station, n.y. 11746-2142 usa ehana: (481A) fA7_ATAN 2 fave (R18) GAT_RFAQ . amail- ataMintareary COM D O4F MH O?773409 0001174 113 ATC # 001-815 Rev B 9/96; 1 of 8ATC 900 Capacitance Values CAP. CODE CAP. (MFd) TOL. RATED WVDC 103 010 300 153 015 300 223 022 300 333 033 250 473 047 250 683 068 250 104 10 200 154 45 K, M,N 200 224 22 200 334 33 150 474 AT 150 684 68 150 824 82 100 105 1.0 100 SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY. VRMS = 0.707 x WVDC CAPACITANCE TOLERANCE (ode} K | M | N Tol. | +10% | +20% | +30% ATC PART NUMBER CODE ATC 900 C 10 5 M W 100 * B Series ] L Packaging Case Size B - Bulk Packaging (packed in plastic bags) Capacitance Code: C- ATC Cap-Pac (Watfle-pack) First 2 significant digits for capacitance. | - Special Packaging. Consult Factory Indicates number of zeros following digits of capacitance in picofarads except for decimal values. % = No Marking M = Ink Marking, Special Order Only. Capacitance Tolerance WVDC Termination Code The above part number refers to a 900 C Series (case size C) 1.0 MFd capacitor, M tolerance (420%), 100 WVDC, with W termination (solder plate) and bulk packaging. For additional information and catalogs contact your ATC representative or call direct at (516) 547-5700. Consult factory for additional performance data. American Technical Ceramics One Norden Lone, Huntington Station, N.Y. 11746-2102 phi D OF MM O773409 0001175 OST m 2018ATC 900 C Capacitors: Mechanical Configurations ATC ATC OUTLINES BODY DIMENSIONS SERIES | reon CASE SIZE inches (mm) LEAD AND TERMINATION & CASE CODE & TYPE WITIS A LENGTH WIDTH | THICKNESS | DIMENSIONS AND MATERIALS SIZE TERMINATION SURFACE (L) (W) (T) C 930 SOLDER PLATE ao . Nickel barrier, solder plated. +.020 -.010 : 9006 | W ; (5.84 Rugged, high performance Soider Plate +|t je tolt |. +0.51 -0.25) termination for lower cost, high volume applications. C 930 BARRIER /CAP eo +.070-.010 | 250 +015 Nickel barrier, solder plated with the 900C P _ (5.84 (6.35 +0.38) addition of hot solder dip process. Pellet a) tk tft le +1,78 -0.25) ~ Solder melting temperature is 355F, 179C. C 4 230 UNI-TERM Ra .020 -.010 9006 | CA i 684 NICKEL BARRIER, GOLD PLATED Gold Chip >) bie * | t fs 40.51 -0.25) TERMINATIONS TL 145 (3.68) C | fe yl max. for a ratty 900C | MS a wh we capacitance L smo, Microstri > > values L=- -f) min. eros? oft i+ Melt fe < 0.82 MFd; W1 = .240 +.005 z 165419 (6.10 +.127) C Lite y lle "max. for ete 008) ae + . 102 +, 900C | AR WL | Lo w a capacitance ; Axial Ribbon - + values Leads are Attached with oft |e +| 7 \s > 0.82 MFd High Temperature Solder. C yale y Silver-plated Copper Leads _ 245 +.025 | .250+.015 . 900C AW aT w (6.22 +0.64) | (6.35 +0.38) Ly = 1.0 (25.4) min. Axial Wire ofa alte Dia. = .025 +.002 (0.64 0.05) C of ep itle a Leads gooc | VA ae + - wR LL = 600 (12.7) min. Vertical > W_ = * See below Axial Ribbon it ls Tle T,, = .004 +.001 (.102 +.025) C al te is Silver-plated Copper Leads 900C | RW oe ( 1 ge Ly = 1.0 (25.4) min. Radial Wire ele lal w Je Dia. = .092 +.002 (0.81 +0.05) Custom lead styles and lengths are available; consult factory. All 900 C Capacitors are available marked with ATC's identification, capacitance code and tolerance. * W, =.110 (2.79) for capacitance values < 0.82 MFd. W_ = .130 (3.30) for capacitance values > 0.82 MFd. 3 of 8 American Technical Ceramics One Norden Lane, Huntington Station, N.Y. 11746-2102 D O&8F MB 0773409 0001176 T3b v.comATC 900 C Capacitors: Non-Magnetic Mechanical Configurations ATC ATC OUTLINES BODY DIMENSIONS SERIES | eon CASE SIZE Inches (mm) LEAD AND TERMINATION & CASE CODE & TYPE WITISA LENGTH WIDTH | THICKNESS | DIMENSIONS AND MATERIALS SIZE TERMINATION SURFACE (L) (W) (T) 00 NON-MAGNETIC eo _ 4.025 -.010 Copper barrier, solder plated. 900C | WN (5.84 Rugged, high performance Bier Sate alu fe tal r fe +0.64 -0.25) 165 (4.19) | _ termination for lower cost, high 250 +.015 max. volume applications. C 940 (6.35 +0.38) weet NON-MAGNETIC eo ~ +.070 -.010 P. Copper barrier plated with the g00C | PN * (5.84 addition of hot solder dip process. Or Hag ou fe Ppt le +1.78 -0.25) Solder melting temperature is P 355F, 179C, Custom lead styles and lengths are available; consult factory. All 900 C Capacitors are available marked with ATCs identification, capacitance code and tolerance. American Technical Ceramics One Norden Lane, Huntington Station, N.Y. 11746-2102 D Od&F MB O773409 0001177 92e2 phi m 40f8ATC 900 C Performance Data ESR VS CAPACITANCE ATC SERIES 900, CASE C 0.1 ae =e ae po _ pete a = E PP 30 MHz o a pone Ww pn, (Typical) 0.01 teneorbeeniomd 0.01 0.1 1 CAPACITANCE( [LF) Q VS CAPACITANCE ATC SERIES 900, CASE C 100 10 o 1 (Typical) 0.1 0.01 0.1 CAPACITANCE (uF) American Technical Ceramics One Norden Lane, Huntington Station, N.Y. 11746-2102 of 8 eph >) O8F Ml 07739409 0001178 669 mm om(MHz) FREQUENCY RMS CURRENT (Amps) ATC 900 C Performance Data SERIES RESONANCE VS CAPACITANCE ATC SERIES 900, CASE C 100 10 (Typical) 1 0.01 0.1 ] CAPACITANCE (uF} CURRENT RATING VS CAPACITANCE ATC SERIES 900, CASE C 100 The current rating is based ona 85C mounting surface with a thermal resistance of 15C/W. A power dissipation of 4 W will result in a case temperature of 125C. 10 Dotted line = Power dissipation limited 0.01 0.1 ] CAPACITANCE (uF) American Technical Ceramics # One Norden Lane, Huntington Station, N.Y. 11746-2102 pho) =) = O8F MM 0773405 0001179 77S Fore