n FEATURES
l All or nothing relay
l UL, CSA, VDE, SEV, FIMKO, SEMKO, ÖVE, BSI
recognized
l Working class: C
l Type of service: continuous duty
l Heavy duty 16 A miniature power relay
l UL Class B (130°C) insulation
l High isolation in small package
—Insulation distance: 8 mm
—Dielectric strength: 5,000 VAC
(between coil and contacts)
—Surge strength: 10,000 V
l Low power consumption and high sensitivity type
available VSB-S)
l Plastic sealed (with tape) type available
l RoHS compliant since date code:0523
Please see page 6 for more information
VSB SERIES
POWER RELAY
1 POLE—16 A (HEAVY POWER CONTROL)
1
RoHS compliant
(a) Series Name VSB : VSB Series
(b) Nominal Voltage Refer to the COIL DATA CHART
(c) Coil Type Nil : Standard type (700 to 750 mW)
S : High sensitivity type (530 mW)
(d) Contact Arrangement M : 1 form A (SPST-NO)
T : 1 form C (SPDT)
(e) Enclosure B : Flux free type
C : Plastic sealed type (with tape)
Note: Actual marking omits the hyphen (-) of (*)
n ORDERING INFORMATION
VSB – 12 S T B
[Example] (a) (*) (b) (c) (d) (e)
DISCONTINUED (2012)
2
VSB SERIES
Nominal Coil resistance Must operate Must release Nominal
MODEL voltage (±10%) voltage* voltage* power
VSB- 3 ( ) ( ) 3 VDC 12.5 Ω 2.1 VDC 0.3 VDC 720 mW
VSB- 5 ( ) ( ) 5 VDC 36 Ω 3.5 VDC 0.5 VDC 700 mW
VSB- 6 ( ) ( ) 6 VDC 50 Ω 4.2 VDC 0.6 VDC 720 mW
VSB- 9 ( ) ( ) 9 VDC 115 Ω 6.3 VDC 0.9 VDC 700 mW
VSB- 12 ( ) ( ) 12 VDC 200 Ω 8.4 VDC 1.2 VDC 720 mW
VSB- 14 ( ) ( ) 14 VDC 280 Ω 9.8 VDC 1.4 VDC 700 mW
VSB- 18 ( ) ( ) 18 VDC 460 Ω 12.6 VDC 1.8 VDC 700 mW
VSB- 24 ( ) ( ) 24 VDC 820 Ω 16.8 VDC 2.4 VDC 700 mW
VSB- 36 ( ) ( ) 36 VDC 1,850 Ω 25.2 VDC 3.6 VDC 700 mW
VSB- 48 ( ) ( ) 48 VDC 3,300 Ω 33.6 VDC 4.8 VDC 700 mW
VSB- 60 ( ) ( ) 60 VDC 5,100 Ω 42.0 VDC 6.0 VDC 700 mW
VSB-100 ( ) ( ) 100 VDC 13,400 Ω 70.0 VDC 10.0 VDC 750 mW
VSB- 3S ( ) ( ) 3 VDC 17 Ω 2.1 VDC 0.3 VDC 530 mW
VSB- 5S ( ) ( ) 5 VDC 47 Ω 3.5 VDC 0.5 VDC 530 mW
VSB- 6S ( ) ( ) 6 VDC 68 Ω 4.2 VDC 0.6 VDC 530 mW
VSB- 9S ( ) ( ) 9 VDC 155 Ω 6.3 VDC 0.9 VDC 530 mW
VSB- 12S ( ) ( ) 12 VDC 270 Ω 8.4 VDC 1.2 VDC 530 mW
VSB- 14S ( ) ( ) 14 VDC 370 Ω 9.8 VDC 1.4 VDC 530 mW
VSB- 18S ( ) ( ) 18 VDC 610 Ω 12.6 VDC 1.8 VDC 530 mW
VSB- 24S ( ) ( ) 24 VDC 1,100 Ω 16.8 VDC 2.4 VDC 530 mW
VSB- 36S ( ) ( ) 36 VDC 2,450 Ω 25.2 VDC 3.6 VDC 530 mW
VSB- 48S ( ) ( ) 48 VDC 4,400 Ω 33.6 VDC 4.8 VDC 530 mW
VSB- 60S ( ) ( ) 60 VDC 6,800 Ω 42.0 VDC 6.0 VDC 530 mW
VSB-100S ( ) ( ) 100 VDC 18,560 Ω 70.0 VDC 10.0 VDC 530 mW
n COIL DATA CHART
Standard TypeHigh Sensitivity Type
Note: All values in the table are measured at 20°C.
*: Specied values are subject to pulse wave voltage
DISCONTINUED (2012)
3
VSB SERIES
n SPECIFICATIONS
Item Standard Type
VSB- ( )
High Sensitive type
VSB-( )-S
Contact Arrangement 1 form A (SPST- NO) or 1 form C (SPDT)
Material Silver alloy (AgSnO)
Conguration Single
Resistance (initial) Maximum 100 mΩ at 1 A, 6 VDC
Rating 16 A, 250 VAC / 30 VDC
Maximum Carrying Current*1 16 A
Maximum Switching Rating 4,000 VA / 480W
Maximum Switching Voltage 250 VAC / 150VDC
Maximum Switching Current 16A
Maximum Switching Load*2 100 mA 5 VDC
Coil Nominal Power (at 20ºC) 700 to 750 mW 530 mW
Operate Power (at 20ºC) 350 to 370 mW 260 mW
Operating Temperature -40ºC to +65ºC (no frost) -40ºC to +75ºC (no frost)
Time
Value
Operate (at nominal voltage) Maximum 15ms
Release (at nominal voltage) Maximum 10ms
Life Mechanical 2 x 107 operations minimum
Electrical 1 x 105 operations minimum (contact rating)
Other Vibration
Resistance
Misoperation 10 to 55 Hz, at double amplitude of 1.5 mm
Endurance 10 to 55Hz, at double amplitude of 1.5 mm
Shock
Resistance
Misoperation Min. 100m/s2 (11±1ms)
Endurance Min. 1,000m/s2 (6±1ms)
Weight Approximately 18g
*1 Need to consider the head from PCB when max. current is more than 10A.
*2 Minimum switching loads mentioned above are reference values. Please perform the conrmation test with the actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
Type Compliance Contact rating
UL UL 508, 873
E56140
Flammability: UL 94-V0 (plastics)
16A, 250VAC/30VDC (resistive)
1/3 HP, 250VAC/125VAC
Pilot duty: C150CSA C22.2 No. 14
LR 35579
VDE 0435, 0631, 0700, 0860
n SAFETY STANDARDS
n INSULATION
Item VSB Note
Resistance (initial) Minimum 1,000 MΩ at 500 VDC
Dielectric
Strength
open contacts 1,000 VAC (50/60 Hz) 1 min.
coil and contacts 5,000 VAC (50/60 Hz) 1 min.
Surge Voltage (coil and contact) 10,000 V 1.2 x 50µs standard wave
Complies with SEV, SEMKO, FIMKO, ÖVE, BSI
DISCONTINUED (2012)
4
VSB SERIES
n CHARACTERISTIC DATA
n REFERENCE DATA
DISCONTINUED (2012)
5
VSB SERIES
n DIMENSIONS
l Dimensions l Schematics
(BOTTOM VIEW)
l PC board mounting
hole layout
(BOTTOM VIEW)
VSB-M type
VSB type
VSB-MC type (Plastic sealed type with tape)
VSB-C type (Plastic sealed type with tape)
Unit: mm
DISCONTINUED (2012)
6
VSB SERIES
1. General Information
l Relays produced after the specic date code that is indicated on each data sheet are lead-free
now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fcai.fujitsu.com/pdf/LeadFreeLetter.pdf)
l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward
Sn-3.0Cu-Ni will be used for FTRB3 and FTR-B4 series relays.
l All signal and power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 6 hazardous materials that
are restricted by RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE).
l
It has been veried that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales ofce.
We will ship leaded relays as long as the leaded relay inventory exists.
2. Recommended Lead Free Solder Prole
l Recommended solder paste Sn-3.0Ag-0.5Cu and Sn-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from
February 2005)
RoHS Compliance and Lead Free Relay Information
Reow Solder condi-
3. Moisture Sensitivity
l Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l SnAgCu solder is known as low riskof tin whisker. No considerable length whisker was found by our in-house
test.
5. Solid State Relays
l Each lead terminal will be changed from solder plating to Sn plating and Nickel plating. A layer of Nickel plating
is between the terminal and the Sn plating to avoid whisker.
We highly recommend that you conrm your actual solder conditions
Flow Solder condition:
Pre-heating: maximum 120˚C
Soldering: dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration: maximum 3 sec.
DISCONTINUED (2012)
7
VSB SERIES
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://www.fujitsu.com/us/services/edevices/components/
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
Asia Pacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
Fujitsu Components International Headquarter Ofces
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its afliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its afliates reserve the right to change specications/datasheets without prior notice.
Rev. November 30, 2007
DISCONTINUED (2012)