LEE-128G032B www.vishay.com Vishay Dale LED Display Modules 128 x 32 Graphics Display with Drive Electronics and + 5 V HC CMOS Level Video Interface Red LED Modules, Normal Brightness, Single Board Construction, RoHS-Compliant FEATURES Viewing Area: 12.75" [323.8 mm] W x 3.15" [80.01 mm] L Character Size (5 x 7): 0.65" [16.51 mm] H x 0.45" [11.43 mm] W Pixel Size: 0.063" [1.6 mm] H x 0.031" [0.8 mm] W Pixel Pitch: 0.100" [2.54 mm] Luminance: 100 ft-L minimum Color: Bright red Viewing Angle: > 150 ENVIRONMENTAL SPECIFICATIONS Operating Temperature: - 40 C to + 85 C Storage Temperature: - 40 C to + 85 C Relative Operating Humidity: To 95 % non-condensing Mechanical Shock: 30 G Vibration: 3 G Operating Altitude: 10 000 ft SYMBOL MIN. TYP. MAX. UNITS Logic and LED Drive Voltage VCC + 4.5 + 5.0 + 5.5 VDC Logic and LED Drive Current (Fully Lit) ICC - 1.1 1.3 ADC 3.15 Viweing Area DIMENSIONS in inches [millimeters] DESCRIPTION Logic 1 Input Vih 0.7 VCC - - VDC Logic 0 Input Vil - - 0.3 VCC VDC 0.889 STANDARD ELECTRICAL SPECIFICATIONS OPTICAL SPECIFICATIONS Revision: 07-Dec-12 0.150 Note * Recommended operating voltages, all maximums are absolute maximum 12.68 Viewing Area 0.150 Mounting Holes (6 x) 1.057 0.250 Max. 7.25 7.25 14.80 0.75 Max. Component Height The LEE-128G032B LED display has a video type interface and is driven in a standard row/column refresh method. Pixel data is clocked for a row, and rows are scanned sequentially. Signals are presented for serial data, dot clock, column latch, row data, row clock and display enable. The serial data is entered with the dot clock up to frequencies as high as 8 MHz. After a row of 128 pixels is clocked in, the column latch signal is toggled and the data is latched. At the time the data is latched, the display is briefly disabled using the display enable signal, then the row pointer is advanced with the row clock signal. Once each frame the row data must be asserted to synchronize the column serial data with the beginning row. The recommended scanning frequency is approximately 70 Hz, but may be as high as 200 Hz. Voltage(s) Required: + 5 VDC (VCC) Power Required (Fully Lit): Typ. = 5.5 W, max. = 6.5 W 4.625 4.925 The LEE-128G032B LED display offers high contrast, wide viewing angle, and long distance readability. It emits a bright red color which catches the attention of the viewer, but is yet comfortable to the eye. ELECTRICAL SPECIFICATIONS 0.150 The LEE-128G032B is an LED replacement for the popular APD-128G032 plasma display module. It is designed to offer high brightness and superior viewing characteristics in a slim package. This display is ideal for low to medium level information content and is ideal for applications such as arcade games, process control, POS terminals, medical equipment, message centers and ATM machines. * LED replacement for the popular APD-128G032 plasma display module * + 5 V HC CMOS level video interface * Large characters * Highly visible for long distance viewing * > 30:1 contrast ratio * Bright red color * Slim profile * Reduced power and brightness version * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 0.062 Pin 1 of J1 Pin 1 of J2 Document Number: 37088 1 For technical questions, contact: displays@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LEE-128G032B www.vishay.com Vishay Dale PIN DESCRIPTION LOGIC AND DATA TIMING J2 - POWER CONNECTOR t4 Molex 26-48-1045 or equivalent. Mates with Tyco AMP 3-640428-8, or Molex 09-50-3041 housing with 08-50-0106 socket crimp terminals or equivalent. PIN SIGNAL DESCRIPTION 1 VCC Logic and LED drive supply 2 VCC Logic and LED drive supply 3 GND Ground 4 GND Ground Row Data t2 t1 Row Clock 0 J1 - DATA CONNECTOR 2 1 1 0 FCI 75869-102LF or equivalent. Mates with Tyco AMP 1658621-2 or equivalent t3 30 2 30 31 31 0 0 1 1 Display Enable PIN DESCRIPTION PIN DESCRIPTION 1 Display enable 2 Ground 3 Row data 4 Ground 5 Row clock 6 Ground 7 Column latch 8 Ground 9 Dot clock 10 Ground 11 Serial data 12 Ground 13 No connection 14 Ground Row Clock Column Latch INTERFACE SIGNAL DESCRIPTION Dot clock - This signal enters the serial data on each low to high transition. A total of 128 dot clock transitions must be present for each line of column/anode data. Serial data - This signal presents the pixel data in positive logic format. A logic one represents a lit pixel and a logic zero represents an extinguished pixel. Data is entered from right to left. The first pixel data entered will represent the left most pixel in the row. Column latch - This signal latches the pixel data into the driver outputs. When the column latch signal goes to logic one the data entered previously will fall through to the driver outputs. When the signal returns to a logic zero the data is latched and the shift register is now ready to accept the next row of data. Must be held low while entering new serial data. Display enable - This signal enables the output drivers. Using a duty cycle control, this signal may also be used for intensity control. The display enable must be at logic zero before the column latch signal transitions. To avoid display blurring, the row clock signal should also transition while display enable is a logic zero. Row data - This signal is the first line marker for the scan. This input should be held high to correspond to the first row of pixel data. Row clock - This signal clocks row data on the falling edge. The row clock signal is repetitive and must be present for proper scanning of the display module. The LEE-128G032B has an unique input protection circuit that assures the column drivers stay blanked on power up. The protection circuit unblanks the column drivers when the row clock signal begins (i.e the display begins scanning). Revision: 07-Dec-12 Display Enable 1st bit of row will appear in left most column Serial Data 0 1 2 126 127 t5 Dot Clock t6 Positive edge x 128 t7 PARAMETER MIN. TYP. MAX. UNITS t1 100 - - ns t2 5 - - s t3 1 - - s t4 - 70 200 Hz t5 25 - - ns t6 75 - - ns t7 75 - - ns ORDERING INFORMATION DESCRIPTION PART NUMBER Display, Driver Electronics and + 5 V HC CMOS Interface LED-128G032B J1 Data Connector Kit (2 pcs. recommended) 280105-08 J2 Power Connector Kit 280108-16 Document Number: 37088 2 For technical questions, contact: displays@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: LEE128G032B000E90