MAATCC0010 Digital Attenuator 31.0 dB, 5-Bit, TTL Driver, DC-3.0 GHz Features Rev. V5 Block Diagram Attenuation: 1.0 dB Steps to 31 dB Low DC Power Consumption Small Footprint, JEDEC Package Integral TTL Driver 50 ohm Impedance Test Boards are Available Tape and Reel Packaging Available Lead-Free CSP-1 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of AT90-0263 Description M/A-COM's MAATCC0010 is a GaAs FET 5-bit digital attenuator with integral TTL driver. Step size is 1.0 dB providing 31 dB total attenuation range. This device is in a PQFN plastic surface mount package. The MAATCC0010 is ideally suited for use where accuracy, fast speed, very low power consumption and low costs are required. Pin Configuration2 Ordering Information Part Number Package MAATCC0010 Bulk Packaging MAATCC0010TR 1000 piece reel MAATCC0010-TB Sample Test Board Note: Reference Application Note M513 for reel size information. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1. 2. Pin No. Function Pin No. Function 1 GND 17 NC 2 C16 18 NC 3 C8 19 NC 4 C4 20 NC 5 C2 21 NC 6 C1 22 NC 7 GND 23 NC 8 NC 24 NC 9 NC 25 NC 3 10 NC 26 GND 11 GND 27 RF2 12 RF1 28 GND 13 GND 29 NC1 14 NC 30 Vee 15 NC 31 NC 16 NC 32 +Vcc Pins 10 & 29 must be isolated The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAATCC0010 Digital Attenuator 31.0 dB, 5-Bit, TTL Driver, DC-3.0 GHz Rev. V5 Electrical Specifications: TA = +25C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss -- DC - 3.0 GHz dB -- 3.6 4.0 Attenuation Accuracy Individual Bits 1-2-4-8-16 dB Any Combination of Bits 1 to 31 dB DC - 3.0 GHz DC - 3.0 GHz dB dB -- -- -- -- (.3 +5% of atten setting) (.5 +7% of atten setting) VSWR Full Range DC - 3.0 GHz Ratio -- 2.0:1 2.2:1 Switching Speed 50% Cntl to 90%/10% RF 10% to 90% or 90% to 10% -- -- ns ns -- -- 75 20 150 50 1 dB Compression -- -- 50 MHz 0.5 - 3.0 GHz dBm dBm -- -- +21 +24 -- -- Input IP3 Two-tone inputs up to +5 dBm 50 MHz 0.5 - 3.0 GHz dB dB -- -- +35 +48 -- -- Vcc Vee -- -- -- -- V V 4.75 -8.0 5.0 -5.0 5.25 -4.75 VIL VIH LOW-level input voltage HIGH-level input voltage -- -- V V 0.0 2.0 -- -- 0.8 5.0 lin (Input Leakage Current) Vin = VCC or GND -- uA -1.0 -- 1.0 Icc (Quiescent Supply Current) Vcntrl = VCC or GND -- uA -- 250 400 Icc (Additional Supply Current Per TTL Input Pin) VCC = Max, Vcntrl = VCC - 2.1 V -- mA -- -- 1.0 IEE VEE min to max, Vin = VIL or VIH -- mA -1.0 -0.2 -- Thermal Resistance jc -- -- C/W -- 35 -- Absolute Maximum Ratings 3. 4. 5. 3,4 Parameter Absolute Maximum Max. Input Power 0.05 GHz 0.5 - 3.0 GHz +27 dBm +34 dBm VCC -0.5V VCC +7.0V VEE -8.5V VEE +0.5V VCC - VEE -0.5V VCC - VEE 14.5V Vin5 -0.5V Vin VCC + 0.5V Operating Temperature -40C to +85C Storage Temperature -65C to +125C Recommended PCB Configuration6 Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. 6. 2 Application Note S2083 is available on line at www.macom.com M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAATCC0010 Digital Attenuator 31.0 dB, 5-Bit, TTL Driver, DC-3.0 GHz Rev. V5 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity Truth Table (Digital Attenuator) C16 C8 C4 C2 C1 Attenuation 0 0 0 0 0 Loss, Reference 0 0 0 0 1 1.0 dB 0 0 0 1 0 2.0 dB 0 0 1 0 0 4.0 dB 0 1 0 0 0 8.0 dB 1 0 0 0 0 16.0 dB 1 1 1 1 1 31.0 dB 0 = TTL Low; 1 = TTL High The MSL rating for this part is defined as Level 2 per IPC/JEDEC J-STD-020. Parts shall be stored and/or baked as required for MSL Level 2 parts. Typical Performance Curves VSWR @ Insertion Loss Insertion Loss Inp ut 3.0 2.00 2.0 1.00 1.0 0 1000 2000 3000 0 4000 1000 2000 3000 4000 3000 4000 Frequency (MHz) Fre que ncy (MHz ) Attenuation Error, 1 dB Bit Attenuation Error, 2 dB Bit 0.3 0.3 0.2 0.2 Error (dB) Error (dB) Out p ut 3.00 VSWR Loss (dB) 4.0 0.1 0 0.1 0 -0.1 -0.1 0 1000 2000 Fre que ncy (MHz ) 3000 4000 0 1000 2000 Fre que ncy (MHz ) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAATCC0010 Digital Attenuator 31.0 dB, 5-Bit, TTL Driver, DC-3.0 GHz Rev. V5 Typical Performance Curves Attenuation Error, 8 dB Bit Attenuation Error, 4 dB Bit 0.7 0.7 0.5 Error (dB) Error (dB) 0.5 0.3 0.1 0.3 0.1 -0.1 0 1000 2000 3000 -0.1 4000 0 1000 Fre que ncy (MHz ) 2000 3000 4000 3000 4000 Fre que ncy (MHz ) Attenuation Error, 16 dB Bit Attenuation Error, Max. Attenuation 0.5 Error (dB) Error (dB) 1.5 -0.5 -1.5 0 1000 2000 3000 4000 Fre que ncy (MHz ) VSWR, 1 dB Bit VSWR, 2 dB Bit Out p ut Inp ut Inp ut 1.8 Out p ut 1.6 1.6 VSWR VSWR 1.4 1.4 1.2 1.2 1.0 1.0 0 1000 2000 Fre que ncy (MHz ) 3000 4000 0 1000 2000 Fre que ncy (MHz ) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAATCC0010 Digital Attenuator 31.0 dB, 5-Bit, TTL Driver, DC-3.0 GHz Rev. V5 Typical Performance Curves VSWR, 4 dB Bit VSWR, 8 dB Bit Inp ut Out p ut Inp ut 1.6 1.4 1.4 Out p ut VSWR VSWR 1.6 1.2 1.2 1.0 1.0 0 1000 2000 3000 4000 0 1000 Fre que ncy (MHz ) VSWR, 16 dB Bit 3000 4000 3000 4000 VSWR, Maximum Attenuation Inp ut Inp ut Out p ut 1.6 1.6 1.4 1.4 Out p ut VSWR VSWR 2000 Fre que ncy (MHz ) 1.2 1.2 1.0 0 1000 2000 Frequency (MHz) 3000 4000 1.0 0 1000 2000 Fre que ncy (MHz ) 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAATCC0010 Digital Attenuator 31.0 dB, 5-Bit, TTL Driver, DC-3.0 GHz Rev. V5 CSP-1, Lead-Free 4 x 6 mm, 32-lead PQFN Reference Application Note M538 for lead-free solder reflow recommendations. 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAATCC0010 Digital Attenuator 31.0 dB, 5-Bit, TTL Driver, DC-3.0 GHz Rev. V5 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 7 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: MACOM: MAATCC0010