FDH300ATR - ON SEMICONDUCTOR - Datasheet.Directory

To learn more about ON Semiconductor, please visit our website at

www.onsemi.com

Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers

will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor

product management systems do not have the ability to manage part nomenclature that utilizes an underscore

(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain

device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated

device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please

email any questions regarding the system integration to Fairchild_questions@onsemi.com.

Is Now Part of

ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number

of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right

to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and speciﬁcally disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON

Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON

Semiconductor data sheets and/or speciﬁcations can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s

technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA

Class 3 medical devices or medical devices with a same or similar classiﬁcation in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended

or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its ofﬁcers, employees, subsidiaries, afﬁliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out

of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor

is an Equal Opportunity/Afﬁrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

FDH300 / FDH300A / FDLL300A / FDH333 / FDLL333 — High Conductance Low Leakage Diode

FDH300 / FDH300A / FDLL300A / F DH333 / FDLL333 Rev. 3. 4

February 2016

FDH300 / FDH300A / FDLL300A / FDH333 / FDLL333

High Conductance Low Leakage Diode

Ordering Information

Absolute Maximum Ratings(1), (2)

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-

ble above the re co mmen ded operating conditions and s tres si ng the parts to these level s i s not recommended. In addi-

tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The

absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.

Notes:

1. These ratings are based on a maximum junction temperature of 175C.

2. These are steady-state limits. Fairchild Semiconductor should be consulted on applic ations involving pulsed or

low-duty-cycle operations.

Part Number Top Mark Package Packing Method

FDH300TR H300 DO-204AH (DO-35) Tape and Reel

FDH300A H300A DO-204AH (DO-35) Bulk

FDH300ATR H300A DO-204AH (DO-35) Tape and Reel

FDH333 H333 DO-204AH (DO-35) Bulk

FDH333TR H333 DO-204AH (DO-35) Tape and Reel

FDLL300A WHITE SOD-80 2L Tape and Reel

FDLL333 WHITE SOD-80 2L Tape and Reel

Symbol Parameter Value Unit

WIV Working Inverse Voltage 125 V

IOAverage Rectified Forward Current 200 mA

IFDC Forward Current 500 mA

ifRecurrent Peak Forward Current 600 mA

IFSM Non-Repetitive Peak Forward

Surge Current Pulse Width = 1.0 s 1.0 A

Pulse Width = 1.0 s4.0

TSTG Storage Temperature Range -65 to +200 °C

TJOperating Junction Temperature 175 °C

LL-34 (SOD-80)

THE PLACEMENT OF TH E EXPANSION GAP

HAS NO RELATIONSHIP TO THE LOCATION

OF THE CATHODE TERMINAL

LL-34 COLOR BAND MARKING

DEVICE 1ST BAND

DO-35

FDLL300A WHITE

Cathode is denoted with a black band

-1st band denotes cathode terminal

and has wider width

FDLL333 WHITE

Cathod e Band

FDH300 / FDH300A / FDLL300A / FDH333 / FDLL333 — High Conductance Low Leakage Diode

FDH300 / FDH300A / FDLL300A / F DH333 / FDLL333 Rev. 3. 4 2

Thermal Characteristics

Values are at TA = 25°C unless otherwise noted.

Electrical Characteristics

Values are at TA = 25°C unless otherwise noted.

Symbol Parameter Max. Unit

PDTotal Device Dissipation 500 mW

Derate Above 25°C 3.33 mW/C

RJA Thermal Resistance, Junction-to-Ambient 300 C/W

Symbol Parameter Conditions Min. Max. Unit

VRBreakdown Voltage IR = 100 A150V

VFForward Voltage

FDH300 / FDH300A / FDLL300A IF = 1.0 mA 680 mV

FDH300 IF = 5.0 mA 750 mV

FDH300A / FDLL300A IF = 5.0 mA 760 mV

FDH300 / FDH300A / FDLL300A IF = 10 mA 800 mV

FDH300 IF = 50 mA 880 mV

FDH300A / FDLL300A IF = 50 mA 890 mV

FDH300 / FDH300A / FDLL300A IF = 100 mA 920 mV

FDH300 / FDH300A / FDLL300A IF = 200 mA 1.0 V

FDH333 / FDLL333

IF = 50 mA 800 890 mV

IF = 100 mA 830 940 mV

IF = 150 mA 860 970 mV

IF = 200 mA 0.87 1.05 V

IF = 250 mA 0.88 1.08 V

IF = 300 mA 0.90 1.15 V

IRReverse Current FDH300 / FDH300A / FDLL300A VR = 125 V 1.0 nA

VR = 125 V, TA = 150°C 3.0 A

FDH333 / FDLL333 VR = 125 V 3.0 nA

VR = 125 V, TA = 100°C 500 nA

CODiode Capa citance VR = 0, f = 1.0 MHz 6.0 pF

1.65

1.10

3.30

0.50

1.50

1.30

0.30

0.20

2.64

REF

0.50

0.30

3.60

3.30

1.40

1.20

NOTES: UNLESS OTHERWISE SPECIFIED

A) PACKAGE STANDARD REFERENCE:

JEDEC DO-213, VARIATION AC.

B) ALL DIMENSIONS ARE IN MILLIMETERS.

CORNER RADIUS IS OPTIONAL.

D) LAND PATTERN RECOMMENDATION PER IPC DIOMELF3414N

E) DRAWING FILE NAME: SOD80A

REV3

LAND PATTERN RECOMMENDATION

0.533

0.460

4.56

3.05

T50 = 25.40 MIN (2X)

T26 = 14.00 MIN (2X)

1.91

1.53

NOTES: UNLESS OTHERWISE SPECIFIED

A) PACKAGE STANDARD REFERENCE:

JEDEC DO-204, VARIATION AH.

B) HERMETICALLY SEALED GLASS PACKAGE.

C) PACKAGE WEIGHT IS 0.137 GRAM.

D) ALL DIMENSIONS ARE IN MILLIMETERS.

E) DRAWING FILE NAME:

DO35AREV03

www.onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

www.onsemi.com

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative