1. Product profile
1.1 General description
Common-mode ElectroMag netic Interference (EMI) filters with in tegrated ElectroStatic
Discharge (ESD) protection for one, two and three differential channels. The devices are
designed to provide low insertion loss for differential high-speed signals on each channel
while unwanted common- mode signals are attenuated.
Each dif ferential channel incorporates two sign al lines that are coupled by integrated coils.
Diodes provide protection to d ownstream component s from ESD volt ages up to 15 kV on
each signal line.
1.2 Features and benefits
One, two and three differential channels common-mode EMI filters with integrat ed
ESD protection
ESD protection up to 15 kV contact discha rge according to IEC 61000-4-2
Superior common-mo de suppression over a wide frequency range
Superior RF performance compared to other integrated filters or discrete filters with
external ESD prot ect i on
Extremely high symmetry between line pairs
Industry-st andard Wafer Level Chip Scale Packages: WLCSP5, 10 and 15 for smaller
footprint
1.3 Applications
Smartphone, cellular and cordless phone
Tablet PC and Mobile Internet Device (MID)
HDMI 2.0, HDMI 1.4
MIPI M-PHY and D-PHY as used in Camera Serial Interface (CSI) and Display Serial
Interface (DSI)
General-purpose EMI and Radio-Frequency Interference (RFI) filter and downstream
ESD protection
PCMFXHDMI2S series
Common-mode EMI filter for differential channels with
integrated ESD protection
Rev. 2 — 19 April 2016 Product data sheet
Table 1. Product overview
Type number Number of channels Package Name
PCMF1HDMI2S 1 WLCSP5
PCMF2HDMI2S 2 WLCSP10
PCMF3HDMI2S 3 WLCSP15
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 2 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
2. Pinning information
Table 2. Pinning
Pin Symbol Description Simplified outline Graphic symbol
PCMF1HDMI2S (WLCSP5_2-1-2)
A1 CH1_IN+ channel 1+, external
WLCSP5_2-1-2
A2 CH1_INchannel 1, external
B1 GND_CH1 ground channel 1
C1 CH1_OUT+ channel 1+, internal
C2 CH1_OUTchannel 1, internal
PCMF2HDMI2S (WLCSP10_4-2-4)
A1 CH1_IN+ channel 1+, external
WLCSP10_4-2-4
A2 CH1_INchannel 1, external
A3 CH2_IN+ channel 2+, external
A4 CH2_INchannel 2, external
B1 GND_CH1 ground channel 1
B2 GND_CH2 ground channel 2
C1 CH1_OUT+ channel 1+, internal
C2 CH1_OUTchannel 1, internal
C3 CH2_OUT+ channel 2+, internal
C4 CH2_OUTchannel 2, internal
PCMF3HDMI2S (WLCSP15_6-3-6)
A1 CH1_IN+ channel 1+, external
WLCSP15_6-3-6
A2 CH1_INchannel 1, external
A3 CH2_IN+ channel 2+, external
A4 CH2_INchannel 2, external
A5 CH3_IN+ channel 3+, external
A6 CH3_INchannel 3, external
B1 GND_CH1 ground channel 1
B2 GND_CH2 ground channel 2
B3 GND_CH3 ground channel 3
C1 CH1_OUT+ channel 1+, internal
C2 CH1_OUTchannel 1, internal
C3 CH2_OUT+ channel 2+, internal
C4 CH2_OUTchannel 2, internal
C5 CH3_OUT+ channel 3+, internal
C6 CH3_OUTchannel 3, internal
ABC
B1
1
2
Transparent top view
A1
A2
C1
C2
aaa-019784
B1
ABC
B1
B2
1
2
3
4
Transparent top view
A
1, 3
A
2, 4
C1, 3
C2, 4
aaa-019785
B1, B2 - no internal connection
B2
B3
B1
1
2
3
4
5
6
ABC
Transparent top view
A1, 3, 5
A2, 4, 6
C1, 3, 5
C2, 4, 6
aaa-019786
B1, B2, B3 - no internal connection
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 3 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
3. Ordering information
4. Marking
5. Limiting values
Tabl e 3. Ordering i nformation
Type number Package
Name Description Version
PCMF1HDMI2S WLCSP5 wafer level chip-size package; 5 bumps (2-1-2) PCMF1HDMI2S
PCMF2HDMI2S WLCSP10 wafer level chip-size package;
10 bumps (4-2-4) PCMF2HDMI2S
PCMF3HDMI2S WLCSP15 wafer level chip-size package;
15 bumps (6-3-6) PCMF3HDMI2S
Table 4. Marking codes
Type number Marking code
PCMF1HDMI2S PF1S
PCMF2HDMI2S PF2S
PCMF3HDMI2S PF3S
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VIinput voltage 0.5 5 V
VESD electrostatic discharge
voltage IEC 61000-4-2, level 4;
all input pins to ground
contact discharge 15 15 kV
air discharge 15 15 kV
IEC 61000-4-2, level 4;
all output pins to ground
contact discharge 22 kV
air discharge 22 kV
IPPM rated peak pulse
current tp=8/20s77 A
Tstg storage temperature 40 +125 C
Tamb ambient temperature 40 +85 C
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 4 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
6. Characteristics
6.1 Channel characteristics
[1] This parameter is guaranteed by design.
[2] 100 ns Transmission Line Pulse (TLP); 50 ; pulser at 70 ns to 90 ns.
[3] According to IEC 61000-4-5 (8/20 s).
6.2 Frequency characteristics
[1] Normalized to attenuation at 1 MHz.
Table 6. Channel characteristics
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Rs(ch) channel series resistance single line; input to output - 3 -
Cddiode capacitance f = 1 MHz; VI= 2.5 V [1] -0.25-pF
IRM reverse leakage current per line; VI= 5 V - - 100 nA
VBR breakdown voltage IR=1mA 69- V
VFforward voltage IF=10mA - 0.8 - V
VCL clamping voltage TLP [2]
IPP = 16 A - 3.7 - V
IPP = 8A - 2.5 - V
IPP = 8A -2.8-V
IPP = 16 A - 4 - V
Rdyn dynamic resistance TLP [2]
positive transient - 0.16 -
negative transient - 0.16 -
surge [3]
positive transient - 0.22 -
negative transient - 0.22 -
Table 7. Frequency chara cteristics
Symbol Parameter Conditions Min Typ Max Unit
Common mode: S21cc
il insertion loss [1]
f = 800 MHz - 12 - dB
f= 1.7GHz - 21.5 - dB
f= 3GHz - 31.5 - dB
Differential mode: S21dd
il insertion loss f = 1 MHz [1] -0.3-dB
f3dB cut-off frequency [1] -6-GHz
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 5 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
Fig 1. Differential-mode insertion loss; typical values Fig 2. Common-mode insertion loss; typical values
tr= 200 ps
Fig 3. Differential crosstalk; typical values Fig 4. Differential Time Domain Reflectometer (TDR)
plot; typical values
aaa-019777
-4
-6
-2
0
Sdd21
(dB)
-8
f (Hz)
1071010
109
108
S21dd pin 5 - 6
S21dd pin 1 - 2
f (Hz)
1071010
109
108
aaa-019778
-30
-20
-40
-10
0
Scc21
(dB)
-50
S21cc pin 5 - 6
S21cc pin 1 - 2
aaa-021982
-40
-60
-20
0
Sdd21
(db)
-80
f (Hz)
1071011
1010
108109
Mag S21dd A3 - A4 > C1 - C2
Mag S21dd A5 - A6 > C1 - C2
t (ns)
40.4 41.241.040.6 40.8
aaa-019779
95
105
115
Zdif
(Ω)
85
Z reference
Z DUT
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 6 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
Test frequency: 148.5 MHz
Differential swing voltage: 861 mV
Horizontal scale: 34 ps/div
Fig 5. HDMI 2.0 eye diagram TP1 , test board with PCMF2HDMI2S; typical values
Test frequency: 148.5 MHz
Differential swing voltage: 917 mV
Horizontal scale: 34 ps/div
Fig 6. HDMI 2.0 eye diagram TP1, test board without device; typical values
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 7 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
Test frequency: 148.5 MHz
Differential swing voltage: 849 mV
Horizontal scale: 34 ps/div
Remark: Measured at Test Point 2 (TP2) worst cable emulator, reference cable equalizer and
worst case positive skew.
Fig 7. HDMI 2.0 eye diagram TP2 , test board with PCMF2HDMI2S; typical values
Test frequency: 148.5 MHz
Differential swing voltage: 909 mV
Horizontal scale: 34 ps/div
Remark: Measured at Test Point 2 (TP2) worst cable emulator, reference cable equalizer and
worst case positive skew.
Fig 8. HDMI 2.0 eye diagram TP2, test board without device; typical values
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 8 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
Vertical scale: 145 mV/div
Horizontal scale: 15.6 ns/div
Fig 9. MIPI M-PHY PWM-TX transmitter eye opening at 140 mV, test board with
PCMF2HDMI2S; typical values
Vertical scale: 146 mV/div
Horizontal scale: 15.6 ns/div
Fig 10. MIPI M-PHY PWM-TX transmitter eye opening at 140 mV, test board without
device; typical values
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 9 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
Vertical scale: 145 mV/div
Horizontal scale: 15.6 ns/div
Fig 11. MIPI M-PHY PWM-TX transmitter eye opening at 140 mV, test board with
PCMF2HDMI2S; typical values
Vertical scale: 146 mV/div
Horizontal scale: 15.6 ns/div
Fig 12. MIPI M-PHY PWM-TX transmitter eye opening at 140 mV, test board without
device; typical values
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 10 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
The device uses an advanced clamping stru cture showing a negative dynamic resist ance.
This snapback behavior strongly reduces the clamping voltage to the system behind the
ESD protection during an ESD event. Do not con nect unlimited DC current sources to the
data lines to avoid keeping the ESD protection device in snapback state after exceeding
breakdown voltage (due to an ESD pulse for instance).
Transmission Line Pulse (TLP) = 100 ns;
tr = 1 n s Transmission Line Pulse (TLP) = 100 ns;
tr = 1 ns
Fig 13. Dynamic resistance with positive clamping;
typical valu e s Fig 14. Dynamic resistance with negative clamping;
typical values
Very-Fast Transmission Line Pulse (VF-TLP) = 5 ns;
tr = 600 ps Very-Fast Transmission Line Pulse (VF-TLP) = 5 ns;
tr = 600 ps
Fig 15. Dynamic resistance with positive clamping;
typical valu e s Fig 16. Dynamic resistance with negative clamping;
typical values
VCL (V)
0252010 155
aaa-019781
10
15
5
20
25
I
(A)
0
VCL (V)
-25 0-5-15 -10-20
aaa-019782
-15
-10
-20
-5
0
I
(A)
-25
VCL (V)
0252010 155
aaa-021984
10
15
5
20
25
I
(A)
0
VCL (V)
-25 0-5-15 -10-20
aaa-021983
-15
-10
-20
-5
0
I
(A)
-25
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 11 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
7. Application information
The device is designed to provide high-level ESD protection and common-mode filtering
for dif ferential high-speed data line pairs such as:
•HDMI 2.0
•Transition-Minimized Differential Signaling (TMDS)
•DisplayPort
•external Serial Advanced Technology Atta chment (eSATA)
•Low Voltage Differential Signaling (LVDS)
When designing the PCB, give carefu l cons ideration to impedance matching and signal
coupling. Do not connect the protecte d signal lines to unlimited current sources like, for
example, a battery.
According to IEC 61000-4-5 (8/20 s) According to IEC 61000-4-5 (8/20 s)
Fig 17. Dynamic resistance with positive clamping;
typical valu e s Fig 18. Dynamic resistance with negative clamping;
typical values
VCL (V)
0108462
aaa-022150
4
6
2
8
10
I
(A)
0
VCL (V)
-10 0-2-6 -4-8
aaa-022151
-6
-4
-8
-2
0
I
(A)
-10
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 12 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
8. Package outline
Fig 19. Package outline WLCSP5
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
PCMF1HDMI2S
pcmf1hdmi2s_po
Unit
mm
max
nom
min
0.60 0.38 0.82 1.22
A
Dimensions (mm are the original dimensions)
WLCSP5: wafer level chip-size package; 5 bumps (2-1-2) PCMF1HDMI2S
A1b
0.31
DEee
1e2
0.800.57 0.37 0.77 1.17 0.40 0.400.26
0.54 0.36 0.72 1.120.21
0 1 mm
scale
detail X
A
A1
X
A
B
C
E
D
21
e2
e1
e
b
1/2 e
B1
bump A1
index area
bump A1
index area
15-10-14
15-10-22
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 13 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
Fig 20. Package outline WLCSP10
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
PCMF2HDMI2S
pcmf2hdmi2s_po
Unit
mm
max
nom
min
0.60 0.38 1.62
1.52
1.22
A
Dimensions (mm are the original dimensions)
WLCSP10: wafer level chip-size package; 10 bumps (4-2-4) PCMF2HDMI2S
A1b
0.31
DEee
1e2
0.800.57 0.37 1.57 1.17 0.40 0.40
e3
0.800.26
0.54 0.36 1.120.21
0 1 mm
scale
15-10-14
15-10-22
detail X
A
A1
X
A
B
C
E
D
e2
e1
B2B1
bump A1
index area
bump A1
index area
eb
43
e3
21
1/2 e
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 14 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
Fig 21. Package outline WLCSP15
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
PCMF3HDMI2S
pcmf3hdmi2s_po
Unit
mm
max
nom
min
0.60 0.38 2.42 1.22
0.80
A
Dimensions (mm are the original dimensions)
WLCSP15: wafer level chip-size package; 15 bumps (6-3-6) PCMF3HDMI2S
A1b
0.31
DEee
1e2
0.80
e3
0.57 0.37 2.37 1.17 0.40 0.400.26
0.54 0.36 2.32 1.120.21
0 1 mm
scale
detail X
A
A1
D
E
bump A1
index area
bump A1
index area X
e2
e
e1
e3
b
12 4365
A
B
C
1/2 e
B1 B2 B3
15-10-14
15-10-22
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 15 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
9. Soldering
Fig 22. Soldering footprint WLCSP5 (PCMF1HDMI2S)
WLCSP5: Solder footprint and stencil aperture PCMF1HDMI2S
pcmf1hdmi2s_fr
solder resist opening (SR)
occupied area
solder land plus solder paste
solder paste deposit (SP)
solder land (SL)
Dimensions in mm
SRP
0.25 0.325
Hx
1.00
SL
0.25
SP
0.40 15-10-14
15-10-22
Hy
1.40
SL = SP
SR
detail X
see
detail X
P
P
Hx
Hy
recommend stencil thickness: 0.1 mm
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 16 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
Fig 23. Soldering footprint WLCSP10 (PCMF2HDMI2S)
Fig 24. Soldering footprint WLCSP15 (PCMF3HDMI2S)
WLCSP10: Solder footprint and stencil aperture PCMF2HDMI2S
pcmf2hdmi2s_fr
solder resist opening (SR)
occupied area
solder land plus solder paste
solder paste deposit (SP)
solder land (SL)
Dimensions in mm
P1 SRP
0.80 0.25 0.325
Hx
1.80
SL
0.25
SP
0.40 15-10-14
15-10-22
Hy
1.40
SL = SP
SR
detail X
see
detail X
P
P
P1
Hx
Hy
recommend stencil thickness: 0.1 mm
WLCSP15: Solder footprint and stencil aperture PCMF3HDMI2S
pcmf3hdmi2s_fr
solder resist opening (SR)
occupied area
solder land plus solder paste
solder paste deposit (SP)
solder land (SL)
Dimensions in mm
P1 SRP
0.80 0.25 0.325
Hx
2.60
SL
0.25
SP
0.40 15-10-14
15-10-22
recommend stencil thickness: 0.1 mm
Hy
1.40
SL = SP
SR
detail X
see
detail X
P
P
P1
Hx
Hy
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 17 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
10. Revision history
Table 8. Revision history
Document ID Release date Data sheet status Change notice Supersedes
PCMFXHDMI2S_SER v.2 20160419 Product data sheet - PCMFXHDMI2S_SER v.1
Modifications: •Section 1 “Product profile”: updated
•Section 6.1: clamping voltage VCL added; dynamic resistance Rdyn updated
•Section 6.2: insertion loss il updated
•Figure 3: added
•Figure 5 to Figure 8: updated
•Figure 9 to Figure 12 and Figure 15 to Figure 18: added
•Section 7 “Application information”: added
PCMFXHDMI2S_SER v.1 20151126 Preliminary data sheet - -
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 18 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
11. Legal information
11.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product st atus of de vice(s) descr ibed in th is document m ay have cha nged since thi s document w as publish ed and may di ffe r in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
11.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not b e relied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict wit h the short data sheet, th e
full data sheet shall pre va il.
Product specificat ion — The information and data provided in a Product
data sheet shall define the specification of the product as agr eed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
11.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warrant ies, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no
responsibility for the content in this document if provided by an information
source outside of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use — Nexperia products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in perso nal injury, death or severe property or environmental
damage. Nexperia and its suppliers accept no liability for
inclusion and/or use of Nexperia products in such equipment or
applications and ther efore such inclu sion and/or use is at the cu stomer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applicati ons or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Custo mers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party custo mer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
No offer to sell or license — Nothing i n this document may be interpreted or
construed as an of fer t o sell product s that is open for accept ance or the gr ant,
conveyance or implication of any license under any copyrights, patents or
other industrial or inte llectual property rights.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development .
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved
PCMFXHDMI2S_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 April 2016 19 of 20
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Quick reference data — The Quick reference dat a is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified,
the product is not suitable for automotive use. It i s neither qua lif ied nor test ed
in accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of
non-automotive qualified products in au tomotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automot ive specifications and standards, custome r
(a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies Nexperia for any
liability, damages or failed product claims resulting from customer design an d
use of the product for automotive applications beyond Nexperia’s
standard warranty and Nexperia’s product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
11.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respective ow ners.
12. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Nexperia PCMFXHDMI2S series
Common-mode EMI filter for differential channels with ESD protection
13. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 3
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
6.1 Channel characteristics . . . . . . . . . . . . . . . . . . 4
6.2 Frequency characteristics. . . . . . . . . . . . . . . . . 4
7 Application information. . . . . . . . . . . . . . . . . . 11
8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 12
9 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 17
11 Legal information. . . . . . . . . . . . . . . . . . . . . . . 18
11.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 18
11.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
11.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
11.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
12 Contact information. . . . . . . . . . . . . . . . . . . . . 19
13 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
19 April 2016
