RJFTVX, USBFTVX, RJ11FTVX NEW RJ45,USB, RJ11/12 explosion proof solutions for Zone 2 Amphenol Atex Field Bus range is designed for device group II category 3G. According to EN60079-15 it may be operated within zone 2 and class I, Division 2, as low power non sparking connectors. RJFTVX * Rugged and sealed RJ45 connector RJFTVX allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in ATEX zone 2 environments. With the patented RJStop system you can use a standard RJ45 cordset in a metallic plug which will protect it from shocks, dust and fluids. RJFTVX features the same main characteristics than RJFTV series (see page 14) RJFTVX6 PLUG CHARACTERISTICS Ex marking II3G ExnAIIT6 X Operating temperature range -40C / +60C Voltage 60 Veff max Power 20 W max Sealing 6mm to 12mm IP68 Data transmission 10 BaseT, 100 BaseTX & 1000 BaseT networks. Cat. 5e per TIA/EIA 568B & Class D per ISO/IEC 11801 Part numbers: Nickel Plated plug: RJFTVX6MN Olive drab cadmium plug: RJFTVX6MG IP68 metallic cap: RJFTVC6N IP68 metallic cap: RJFTVC6G RJFTVX2 receptacle Amphenol RJF/USBF/RJ11 ATEX Outside cable diameter Part numbers: 52 RECEPTACLE RECEPTACLE CAP Nickel Plated * RJ45 back termination * coding A-: RJFTVX2SA1N Olive drab cadmium * RJ45 back termination * coding A: RJFTVX2SA1G Nickel: RJFTVC2N Olive drab cadmium: RJFTVC2G informations & contacts: www.rjfield.com & www.usbfield.com * contact@rjfield.com & contact@usbfield.com i m NEW RJFTVX7 receptacle Part numbers: RECEPTACLE RECEPTACLE CAP Nickel Plated * RJ45 back termination * coding A-: RJFTVX7SA1N Olive drab cadmium * RJ45 back termination * coding A: RJFTVX7SA1G IP68 metallic cap: RJFTVC7N IP68 metallic cap: RJFTVC7G REMARK: As receptacles are compounded (IP68 transversally sealing), coding position has to be specified in the part number: "A" (standard), "B", "C" or "D". Receptacles can be provided with RJ45 cordsets. There are 4 standard lengths as described hereunder (with coding "A"): Nickel plated / 0,3 meters RJ45 cordsets: RJFTVX2SA2N03100BTX Nickel plated / 0,5 meters RJ45 cordsets: RJFTVX2SA2N05100BTX Nickel plated / 1,0 meters RJ45 cordsets: RJFTVX2SA2N10100BTX Nickel plated / 1,5 meters RJ45 cordsets: RJFTVX2SA2N15100BTX For Olive Drab Cadmium plating replace the "N" with a "G" in the P/N. With USBFTVX, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. This range is fitted to be used in Atex zone 2 environments This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device for high vibrations. USBFTVX features the same main characteristics than USBFTV series (see page 25) CHARACTERISTICS Ex marking II3G ExnAIIT6 X Operating temperature range -40C / +70C Voltage 60 Veff max Power 20 W max Outside cable diameter Sealing Data transmission Amphenol USBFTVX6 PLUG RJF/USBF/RJ11 ATEX USBFTVX * Rugged and sealed USB connector 4mm to 6mm IP68 USB 2.0 up to 480 Mb/s Part numbers: PLUG PLUG CAP Nickel: USBFTVX6N Olive drab cadmium: USBFTVX6G Nickel: USBFTVC6N Olive drab cadmium: USBFTVC6G informations & contacts: www.rjfield.com & www.usbfield.com * contact@rjfield.com & contact@usbfield.com 53 NEW USBTVX2 & USBTVX2 receptacles Square Flange Receptacle Type USBFTV2 Jam Nut Receptacle Type USBFTV7 Cable end Type "A" (Standard USB "A" Plug) Cable end Type "A" (Standard USB "A" Plug) Cable end Type "OPEN" (No connector) Cable end Type "OPEN" (No connector) RECEPTACLE CAPS Part numbers: Nickel plated cap for USBFTVX2: USBFTVC2NOlive drab cadmium cap for USBFTVX2: USBFTVC2G Nickel plated cap for USBFTVX7: USBFTVC7NOlive drab cadmium cap for USBFTVX7: USBFTVC7G Series USB Field TV USBF TVX Shell Type 2S :Square flange receptacle 7S: 2S A 2 N 03 A Jam nut receptacle Coding "A" (Standard) or "B" Back Terminations 2: Rugged USB cable Amphenol RJF/USBF/RJ11 ATEX Shells Plating N:Nickel 54 G:Olive drab cadmium plating USB cable length 03: 30 cm [11.81 inches] 05: USB cable end A:Standard USB-A plug OPEN:Open cable (no connector) 50 cm [19.68 inches] 10: 1 meter [39.37 inches] RJ11FTVX * Rugged and sealed RJ11/12 connector RJ11FTVX allows you to use a standard phone RJ11 / RJ12 connection in Atex zone 2 environments. With the patented RJStop(R) system you can use a standard RJ11 / RJ12 cordset in a metallic plug which will protect it from shocks, dust and fluids. CHARACTERISTICS Ex marking Operating temperature range Voltage Power Outside cable diameter Sealing Coupling mechanism Mating cycles Salt spray Coding Fire retardant / Low Smoke R11 cordset retention in the plug II3G ExnAIIT6 X -40C / +60C 60 Veff max 20 W max 4mm to 5.5mm IP68 Tri Start thread with anti-decoupling device (MIL-DTL-38999 series III) 500 min 48h with nickel plating / 500 h with oliv drab cadmium plating 4 mechanical user-defined coding / Polarization settings (insert rotation) UL94 V0 and NF16 101 & 16 102 100 N in the Axis informations & contacts: www.rjfield.com & www.usbfield.com * contact@rjfield.com & contact@usbfield.com i Part numbers: PLUG CAP Nickel plated: RJF11TVX6MN Olive drab cadmium: RJ11FTVX6MG Nickel plated: RJ11FTVC6N Olive drab cadmium: RJ11FTVC6G RJ11FTVX2 Part numbers: RECEPTACLE RECEPTACLE CAP Nickel Plated - Female RJ45 back termination - coding A-: RJ11FTVX2SA1N D'ASSEMBLAGE Olive drab cadmiumINSTRUCTIONS - Female RJ45 back termination - coding A: RJ11FTVX2SA1G Nickel plated: RJ11FTVC2N Olive drab cadmium: RJ11FTVC2G RJ11FTVX7 Amphenol ASSEMBLY INSTRUCTIONS socapex www.RJField.com RJF/USBF/RJ11 ATEX FIGURE 1 Diametre de cable acceptable : 4 a 5.5mm Outside cable diameter : 4 to 5.5mm RECEPTACLE CAP Nickel Plated - Female RJ45 back termination - coding A-: RJ11FTVX7SA1N Olive drab cadmium - Female RJ45 back termination - coding A: RJ11FTVX7SA1G Nickel: RJ11FTVC7N Olive drab cadmium: R11JFTVC7G REMARK: As receptacles are compounded (IP68 transversally sealing), coding position has to be specified in the part number: "A" (standard), "B", "C" or "D". INUTE. informations & contacts: www.rjfield.com & www.usbfield.com * contact@rjfield.com & contact@usbfield.com Amphenol Part numbers: RECEPTACLE XAGONAL m NEW RJ11FTVX6 PLUG 55 NEW RJ Switch ROHS compliant Industrial Gigabit Ethernet Switch IP30 Industrial Rugged Ethernet Switch Amphenol offers a full range of Rugged Ethernet switches for industrial use. These switches are specifically designed for industrial applications where Real-Time is a key requirement. The wide range, from unmanaged Plug & Play switches to those managed with fiber optics ports, will fulfill all your needs. This family of switches, IP30 rated, is suitable for both Din-Rail or flat panel mounting. This is an easy way to make the Ethernet networks of your manufacturing site, automation or control units deterministic. This wide range of Ethernet switches is available with following features: * Unmanaged, Real-Time Ring and Managed models * RJ45 ports and up to two fiber optics ports (mutlimode or singlemode) * 5 or 9 port models Applications nFactory Automation n Robotics n Process Control nTransportation Systems n Data Acquisition & Transmission * Up to 3 Gigabit ports are offered RJ Switch Dimensions (example for 5 Port Ring Models) nM anaged Switch Networking Features * Rapid Spanning Tree (RSTP) for fast redundant rings * Priority queuing for real-time performance (QoS and CoS) * SNMP v1 and v2 for network management * SNMPv3 for authentication and encryption * IGMP for multicast filtering * VLAN for traffic segregation * User friendly configuration (web, Telnet, RS232) * Encryption using HTTPS, SSL, SSH, SNMPv3 * Message filtering to stop broadcast storms * RMON and port mirroring for diagnostics * The Power of Linux Inside * 3 ports 10/100/1000 - BaseT(X) (*) Amphenol Power and alarm wiring Description (*) depend on models 56 key features nR edundant power inputs with surge/spike protection nU ltra reliable 1,000,000 hours MTBF nH azardous location: operation in Zone 2 nW ide operating temperature range of -40C to 70/85C nR ugged metal packaging with DIN rail or direct panel mounting nA uto-detecting, auto-crossover and auto-polarity n F ull-Duplex operation with flow control (no collisions!) nR ing Switch Networking Features * Real-Time Ring for ultra-fast fault-tolerant loops * Recovery time of 30 ms + 5 ms per hop! * Ideal for deterministic systems and PLCs * Real-time traffic prioritization * Port mirroring for traffic diagnostic * 3 ports 10/100/1000 - BaseT(X) (*) SC or ST fiber connector (1, 2 or none) DIN-Rail or Panel Mounting Fixture 5 or 9 connectors (RJ45, SC or ST fiber) Unmanaged, Ring or Managed Capability Indicators for Power, Alarm Output Status Indicators for Link Status and Datarate 10 Mbps 100 Mbps 1000 Mbps Terminal block for Redundant Power Inputs + Alarm Output IP30 Iridized Aluminum Enclosure * * * informations & contacts: www.rjswitch.com * contact@rjswitch.com i m NEW Managed, Ring & Unmanaged Switch Features IEEE Ethernet Standards 802.3/u 802.3x 802.3z P P P P P P P P P P P 10 Mbps Ethernet & 100 Mbps Fast Ethernet Full-Duplex with Flow Control 1000 Mbps Gigabit Ethernet Regulatory Approvals EMI emissions EMC immunity Shocks Vibrations Free Fall Hazardous Location 802.1p 802.1D 802.1w 802.1Q P P P P P P P P P P P IEEE 802.1p IEEE 802.1D/w IEEE 802.1Q Priority queuing - QoS, CoS, ToS/DS Rapid Spanning Tree for redundant rings VLAN for traffic segregation EN55022, FCC part 15, ICES-003 IEC61326-1, IEEE C37.90 IEC60068-2-27 IEC60068-2-6 IEC60068-2-32 UL1604, CSA C22.2/213 (Class 1, Div. 2), EN50021/Zone 2 EN 60079-15 (Zone 2 locations - EEx nA II T4 x) Ethernet features RJ45 ports 5 or 9 Shielded RJ45 ports 10/100 or 1000 BaseT(x) Fiber optic ports LC or SC or ST connectors Datarate 100BaseFX (100Mbps) or 1000 Mbps for 9RG & 9MG models Wavelength 1300 nm center Fiber multimode (mm) optimal: 62.5/125 um Fiber singlemode (sm) optimal: 9/125 um Fiber max distance (Full duplex): 2km (mm), 15 or 40 km (sm) (except gigabit) 0,5km (mm), 10km (sm) for 9RG & 9MG models Ethernet switch type Intelligent store & forward Full / Half Duplex Configurable RJ45 speed 10, 100 or 1000 Mbps auto-negotiation RJ45 MDI/MDIX Auto-crossover connection RJ45 TD and RD polarity Auto-polarity Typical latency 16 us + frame time @ 10 Mbps (varies on load and settings) 5 us + frame time @ 100 Mbps MAC addresses supported 8192 (MG & RG); 2048 for all other models Memory bandwidth 32 Gbps (MG & RG); 3.2 Gbps for all other models Environmental Operating Temperature Storage Temperature Humidity (non-condensing) Status Ring & Managed models only "OK" contact output (or 10 - 50V DC depends on models) Power Supply Input Power (depends on models) Redundant Inputs - 40C to +85C (5 ports model + RJS 9ES) - 40C to +70C (All other models) - 40C to +85C 5 to 95 % RH 10 - 30V DC Exceeds MIL-STD-1275 Power Industrial protection rating Surge protection Transient protection Spike protection Maximum current 0.5 A RJ Switch IEEE 802.3 /u IEEE 802.3x IEEE 802.3z Features Unmanaged RING RING - Gigabit Managed Managed - Gigabit MIL-STD-1275 Available on: RJS-5RS / RJS-9RS RJS-9MS -4 & -5 100 V for 1s 15 KW peaks 15 KW peaks 5 KW (10 times for 10 s) 5 KW (10 times for 10 s) 250 V (50 times for 100 s) Amphenol Models RJS 9ES RJS 9RS RJS 9RG RJS 9MS RJS 9MG 2 W to 9W typical, all ports active at 100 Mbps 10 - 50V DC (models RJS-5RS ; RJS-9RS) 10 - 30V DC (all other models) informations & contacts: www.rjswitch.com * contact@rjswitch.com 57 NEW Part Number Code Series RJS 5ES 1 - - RJ-Switch Type of Electronics 5ES: 5 ports total, Ethernet unmanaged switch 9ES: 9 ports total, Ethernet unmanaged switch 5RS: 5 ports total, Ethernet Ring switch 9RS: 9 ports total, Ethernet Ring switch 5MS: 5 ports total, Ethernet Managed switch 9MS: 9 ports total, Ethernet Managed switch RJ45 or fiber ports 1: RJ45 ports only, no fiber 2: 1 multimode fiber ports 3: 1 singlemode fiber ports 4: 2 multimode fiber ports (except for 9ES- models) 5: 2 singlemode fiber ports (except for 9ES- models) Style of Fiber connectors Blank: No fiber SC: SC style fiber connector(s) ST: ST style fiber connector(s) SCL: SC style fiber connector(s), long haul fiber (40km), on singlemode models STL: ST style fiber connector(s), long haul fiber (40km), on singlemode models Pre-set for Ring models only E0: Pre-set for 0 rings (special order) E1: Pre-set for 1 ring (standard order), configured on last 2 ports E2: Pre-set for 2 rings (special order), Ring 1 = last 2 ports, Ring 2 = ports 1 & 2. Example: RJ-Switch, 5 ports Ethernet Ring switch, with 1 multimode ST fiber port, pre-set for 1 ring: RJS-5RS-2-ST-E1 RJS 9RG CC RJ-Switch Type of Electronics 9RG: 9 ports, Unmanaged RING Ethernet Switch including 3 gigabit ports 9MG: 9 ports, Managed Ethernet Switch including 3 gigabit ports RJ45 or fiber (FO) ports CC: 6 ports RJ45 100 Mbps + 3 gigabit RJ45 ports MM: 6 ports RJ45 100 Mbps + 1 port gigabit RJ45 + 2 ports FO multimode gigabit (LC connectors) SS: 6 ports RJ45 100 Mbps + 1 port gigabit RJ45 + 2 ports FO multimode gigabit (LC connectors) Note: 9RG models have ports 8&9 (FO or gigabit RJ45) pre-set for a ring. Amphenol RJ Switch Series 58 informations & contacts: www.rjswitch.com * contact@rjswitch.com i m ROHS compliant Atex Zone 2 Rugged & IP68 sealed Ethernet Switch This Ethernet Switch is a combination of rugged packaging with locking device for Zone 2 hazardous location, with faulttolerant network redundancy. Key Features n Ring Switch Networking Features (managed features available!) nReal-Time Ring for ultra-fast fault-tolerant loops * Recovery time of 30 ms + 5 ms per hop! nModbus monitoring over Ethernet * Ideal for deterministic systems and PLCs n Real-time traffic prioritization (QoS and CoS) * Assure delivery of real-time data * Improve network utilization * User settable priority assignments nAdvanced switch features * User configurable port settings * Port mirroring for traffic diagnostics * Pre-configurable for Plug-And-Play simplicity Description (example for Ring model) n Waterproof IP68 Rating (NEMA 6) n Reduced Installation Costs with the patented RJStop(R) system n Use any standard RJ45 cordset n Rugged Enclosure in Polyester reinforced with 30% glass fiber n Redundant power inputs with surge/spike protection n Ultra reliable 1,000,000 hours Mean Time Between Failure (MTBF) n Zone 2 hazardous location (models RJSPC-EX) LEDs indicating activity, link status, datarate (10/100 Mbps) LED indicating ring status 5 rugged IP68 RJ Field Ethernet ports Real-time ring feature IP68 polyester enclosure reinforced with glass fiber OK power & ring status LEDs indicating power Anti-decoupling nut for power plug Anti-decoupling spring for ethernet plugs informations & contacts: www.rjswitch.com * contact@rjswitch.com RJ Switch Industrial Applications nOil & Gas n Process Control nFactory Automation P/N: RJSPC-EX-5RS1-PLG-CAPS Note: this part number includes: * One ATEX Zone 2 IP68 RING Ethernet switch equipped with caps on Ethernet connectors * One power plug equipped with anti decoupling nut * Five Ethernet plugs equipped with anti decoupling spring Amphenol Outstanding features : * IP65/68 Sealing * ATEX Zone 2II3G ExnAII T4X (EN60079-15 & EN60079-0) * Plug and Play simplicity * Ring redundancy * Operating temperature: -40F to 170F (-40C to +75C) P/N: RJSPC-EX-5ES1-PLG-CAPS Note: this part number includes: * One ATEX Zone 2 IP68 Plug and Play Ethernet switch equipped with caps on Ethernet connectors * One power plug equipped with anti decoupling nut * Five Ethernet plugs equipped with anti decoupling spring 59 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Amphenol: USBFTVX2HA2N03A