Lighting & LED Driver Board Name Products Description Order No. For Microcontroller evaluation boards, please see "Microcontroller" category. TLE 8366 Basic buck converter DC/DC converter TLE 6389-2GV Buck converter Multi-purpose buck controller for external PMOS switch, 5V or adjustable output voltage, maximum of 2.3A output current, low quiescent current. Demoboard TLE6389-2GV This board is designed to demonstrate the performance of our linear LED driver TLE 4242G and TLE 4309G with Osram high brightness LEDs. It is possible to choose between the two drivers. A potentiometer allows the adjustment of the PWM duty-cycle for dimming the LEDs. Demoboard TLE4242G LED driver/TLE4309 Drive high-power LEDs (1W, 3W) with the BCR 450 -- Max. supply voltage: 27V -- BCR 450 + 3 different transistors for currents up to 2A -- BAS 3007A-RPP Schottky Diode for Reverse Polarity Protection -- Can be connected to a string of LEDs -- PWM signal can be applied SP000417098 LED driver BCR 450 BCR 450 board Demoboard TLE8366 DC/DC converter TLE 4309 TLE 4242G LED driver demo board This application board enables you to test the performance of the TLE 8366 basic buck converter. It is equipped with a TLE 8366EV for variable output voltages (preadjusted to 4.8V). The board offers several possibilities to modify the schematic and also the possibility to drive LEDs. LED driver 23 Lighting & LED Driver Board Name BCR 402W 12V LED board Products Description Order No. BCR 402W The BCR 402W is an ideal drop-in replacement for resistorbased channel letter solutions: -- 12V supply voltage, 20mA preset LED current -- Footprint for external resistor for adjusting LED current -- Footprint for Schottky diodes (can be replaced by jumpers) -- 3 x 0.2W LEDs in series, type: OSRAM TopLED LW T6SG SP000748242 The BCR 402W is an ideal drop-in replacement for resistorbased channel letter solutions: -- 24V supply voltage, 20mA preset LED current -- Footprint for external resistor for adjusting LED current -- Footprint for Schottky diodes (can be replaced by jumpers) -- 6 x 0.2W LEDs in series, type: OSRAM TopLED LWT6SG SP000748244 LED driver BCR 402W BCR 402W 24V LED board LED driver BCR 320U BCR 320U HW LED board LED driver ILD 4035 ILD 4035 MR16 demo board LED driver ILD 4035 ILD 4035 24V board LED driver ILD 4120 ILD 4120 24V board LED driver ILD 4001 ILD 4001 board LED driver ILD 4180 ILD 4180 demo board LED driver ICL 8001G LED driver board with ICL 8001G Control Offline LED driver IC ICE 3B0365JG LED driver board with CoolSETTM 24 Drive 3 x 1W LED Halogen replacement (MR16) lamps with this SP000891904 ready-to-use reference design: -- Equipped with ILD 4035 for 350mA LED current -- 12V DC or AC supply voltage -- 4 BAS 3010A Schottky Diodes for reverse polarity protection -- Including typical MR16 socket pins for instant use in existing designs. Drive 1W LEDs with the buck LED driver ILD 4035: -- 24V and 12V supply voltage version available -- 350mA preset LED current -- Analog voltage and PWM pin for dimming -- Can be connectec to a string of 1W LEDs SP000858450 (24V version) SP000858448 (12V version) Drive 3W LEDs with the buck LED driver ILD 4120: -- 24V and 12V supply voltage version available -- 700mA preset LED current -- Analog voltage and PWM pin for dimming -- Can be connected to a string of 3W LEDs SP000858452 (24V version) SP000858454 (12V version) Drive high power LEDs (1W, 3W, 3W+) with the buck LED controller ILD 4001: -- 24V supply voltage -- Equipped with BSR 302N MOSFET for currents up to 3A -- Analog voltage and PWM pin for dimming -- Can be connected to a string of high power LEDs SP000889588 Drive ultra-high power LEDs with the buck LED driver ILD 4180: -- Up to 45V supply voltage -- LED current adjustable up to 1.8A -- Demo board can be operated in either constant current or constant output voltage mode SP000848474 Demo board using single stage Quasi Resonant Flyback EVAL-LED-ICL8001G-Bulb02 Topology with ICL8001G primary side power control scheme for phase cut dimming applications with high power factor- and efficiency- requirements. 24V/350mA low-cost and highly efficient LED PSU for multiple LEDs. EVALACDC LED-ICE3B0365JG Power control Ics BTS 3256D HITFETTM protected low-side power switch The BCR 320U is the only dedicated 0.5W LED driver on the SP000858442 market. BCR 320U demo board driver features: -- 24V supply voltage -- Constant LED current of 150mA -- BAS 3007A-RPP Schottky Diode for reverse polarity protection -- 6 x 0.5W LEDs, type: OSRAM Advanced Power Topled + Low-side switch Protected low-side power switch (10m at 25C). This board Demoboard BTS3256D enables easy startup and connectivity for the new power HITFETTM BTS 3256D. Enables easy read out of digital status via LED, and easy slew rate change via variable resistor on board. Lighting & LED Driver Board Name SPIDER (SPI Driver for Enhanced Relay Control) Products Description Order No. TLE 7231G TLE 7233G SPI Driver for Enhanced Relay Control (SPIDER). This board is designed to interface with the universal body control module system evaluation tool. Demoboard TLE7231G/7233G The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7234SE and TLE 7237SL. Demoboard TLE7234/7237 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7235SE and TLE 7238SL. Demoboard TLE7235/7238 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7236SE and TLE 7239SL. Demoboard TLE7236/7239 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7240SL, TLE 7243SL and TLE 7244SL. Demoboard TLE724XSL Multi-channel switch TLE 7234EM TLE 7234SE TLE 7237SL SPIDER (SPI Driver for Enhanced Relay Control) Multi-channel switch TLE 7235EM TLE 7235SE TLE 7238SL SPIDER (SPI Driver for Enhanced Relay Control) Multi-channel switch TLE 7236EM TLE 7236SE TLE 7239SL SPIDER (SPI Driver for Enhanced Relay Control) Multi-channel switch TLE 7240SL TLE 7243SL TLE 7244SL SPIDER (SPI Driver for Enhanced Relay Control) Multi-channel switch HIC-PROFETTM BTS 500x0-1EGA For a quick start to lab evaluation, this demo board drives loads such as heating, glow plugs or lamps in 12V DC applications. It uses two devices from the BTS 500x0-1EGA product family, which can be used in parallel and also to drive two independent loads. The board can be used on a standalone basis, but also in combi-nation with power easy kit for High-side switch quick start of software evaluation. PROFETTM+ demo board BTS 5020-2EKA BTS 5030-2EKA BTS 5045-2EKA BTS 5090-2EKA BTS 5120-2EKA BTS 5180-2EKA PROFETTM+ demo board High-side switch BTS 5590G BTS 5576G BTS 5566G SPOC I - power easy kit Multi-channel switch BTS 5662E BTS 5672E BTS 5682E BTS 5672E BTS 5662E SPOC II - power easy kit Demoboard BTS50050-1EGA Demoboard BTS50060-1EGA Demoboard BTS50070-1EGA Demoboard BTS50080-1EGA This demo board is designed to handle all devices within Demoboard PROFETTM+ the PROFETTM+ family. It provides the complete external circuitry and testpins for a fully functional setup. Additional functions like internal voltage generation for input pins and the possibility to connect more than one demo board for a test setup are included. The demo board comes with a daughterboard that holds the BTS 5020-2EKA which can be replaced by daughterboards of other PROFETTM+ devices . This board is part of the SPOC (SPI power controller for advanced light control) demo kit. The demo kit consists of the power unit and the control unit (XC2287 power easy kit - to be ordered separately). This board is part of the SPOC (SPI power controller for advanced light control) demo kit. The demo kit consists of the power unit and the control unit (XC2287 power easy kit - to be ordered separately). Demoboard BTS5590G BTS5576G BTS5566G Demoboard BTS5662E BTS5672E BTS5682E BTS5672E BTS5662E Multi-channel switch 25 Lighting & LED Driver Board Name SPOC FL - power easy kit Products Description Order No. BTS 6480SF BTS 6460SF BTS 5480SF BTS 5460SF This board is part of the SPOC FL (SPI power controller for advanced front light control) demo kit. Demoboard BTS6480SF BTS6460SF BTS5480SF BTS5460SF Multi-channel switch TLD 5098EL TLD 5098EL Application board DC/DC boost controller TLD 5095EL TLD 5095EL demo board DC/DC boost controller TLD 5098EL TLD 5098EL demo board DC/DC boost controller TLD 5085 TLD 5085 demo board DC/DC buck converter TLD 5085 TLD 5085 Application board with LED 26 Demoboard TLD5098EL This board with the TLD 5085 buck converter is equipped with Demoboard TLD5085 LEDs or can be used via jumper-seeting with external LED loads up to 1.8A. This board with the TLD 5085 buck converter is equipped with one LED or can be used with external LED loads up to 1.8A. Application Board TLD5085 with LED This board with the TLD 5085 buck converter is equipped with a connector to drive external LED loads up to 1.8A. Application Board TLD5085 with Connector Demo board for fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL01G for 1x54W T5 lamp. EVAL board ICB2FL01G Demo board for dimmable fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL02G for 1x26W TC-TEL lamp. EVAL board ICB2FL02G Demo board for fluorescent lamp ballast with smart ballast controller 1st generation ICB 1FL03G for 1x54W T5 lamp. EVAL board ICB1FL02G Demo board for fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL02G for 1x54W T5 lamp. EVAL board ICB2FL02G Demo board for fluorescent lamp ballast with smart ballast controller 1st generation ICB 1FL03G for 1x54W T5 lamp. EVAL board ICB1FL02G Smart ballast controller ICB 1FL03G Evaluation board ICB 1FL03G This board is equipped with TLD 5098EL boost controller, MOSFETs and LEDs or can be used via jumper-seeting with external LED loads up to 1.5A or higher and up to 60V output voltage. Smart ballast controller ICB 2FL02G Evaluation board ICB 2FL02G Demoboard TLD5095EL Smart ballast controller ICB 1FL02G Evaluation board ICB 1FL02G This board is equipped with TLD 5095EL boost controller, MOSFETs and LEDs or can be used via jumper-seeting with external LED loads up to 1.5A or higher and up to 55V output voltage. Smart ballast controller ICB 2FL02G Evaluation board ICB 2FL02G Application Board TLD5098EL DC/DC buck converter ICB 2FL01G Evaluation board ICB 2FL01G This small size DC/DC board is available in the following topologies: -- Boost to battery -- Boost to GND -- SEPIC and can drive LED loads up to 1.5A or higher. DC/DC buck converter TLD 5085 TLD 5085 Application board with connector The demo kit consists of the power unit and the control unit (XC2287 power easy kit - to be ordered separately). Smart ballast controller