BTS6480SF - Infineon Technologies

Lighting & LED Driver

Board Name Products Description Order No.

For Microcontroller evaluation boards, please see “Microcontroller” category.

Basic buck converter

TLE 8366

DC/DC converter

This application board enables you to test the performance

of the TLE 8366 basic buck converter. It is equipped with a

TLE 8366EV for variable output voltages (preadjusted to 4.8V).

The board oers several possibilities to modify the schematic

and also the possibility to drive LEDs.

Demoboard TLE8366

Buck converter

TLE 6389-2GV

DC/DC converter

Multi-purpose buck controller for external PMOS switch, 5V or

adjustable output voltage, maximum of 2.3A output current,

low quiescent current.

Demoboard TLE6389-2GV

LED driver demo board

TLE 4309

TLE 4242G

LED driver

This board is designed to demonstrate the performance of our

linear LED driver TLE 4242G and TLE 4309G with Osram high

brightness LEDs. It is possible to choose between the two

drivers. A potentiometer allows the adjustment of the PWM

duty-cycle for dimming the LEDs.

Demoboard

TLE4242G LED driver/TLE4309

BCR 450 board

BCR 450

LED driver

Drive high-power LEDs (1W, 3W) with the BCR 450

Max. supply voltage: 27V –

BCR 450 + 3 dierent transistors for currents up to 2A –

BAS 3007A-RPP Schottky Diode for Reverse Polarity –

Protection

Can be connected to a string of LEDs –

PWM signal can be applied –

SP000417098

Lighting & LED Driver

Board Name Products Description Order No.

BCR 402W 12V

LED board

BCR 402W

LED driver

The BCR 402W is an ideal drop-in replacement for resistor-

based channel letter solutions:

12V supply voltage, 20mA preset LED current –

Footprint for external resistor for adjusting LED current –

Footprint for Schottky diodes (can be replaced by jumpers) –

3 x 0.2W LEDs in series, type: OSRAM TopLED LW T6SG –

SP000748242

BCR 402W 24V

LED board

BCR 402W

LED driver

The BCR 402W is an ideal drop-in replacement for resistor-

based channel letter solutions:

24V supply voltage, 20mA preset LED current –

Footprint for external resistor for adjusting LED current –

Footprint for Schottky diodes (can be replaced by jumpers) –

6 x 0.2W LEDs in series, type: OSRAM TopLED LWT6SG –

SP000748244

BCR 320U HW

LED board

BCR 320U

LED driver

The BCR 320U is the only dedicated 0.5W LED driver on the

market.

BCR 320U demo board driver features:

24V supply voltage –

Constant LED current of 150mA –

BAS 3007A-RPP Schottky Diode for reverse polarity protection –

6 x 0.5W LEDs, type: OSRAM Advanced Power Topled + –

SP000858442

ILD 4035 MR16

demo board

ILD 4035

LED driver

Drive 3 x 1W LED Halogen replacement (MR16) lamps with this

ready-to-use reference design:

Equipped with ILD 4035 for 350mA LED current –

12V DC or AC supply voltage –

4 BAS 3010A Schottky Diodes for reverse polarity protection –

Including typical MR16 socket pins for instant use in –

existing designs.

SP000891904

ILD 4035 24V board

ILD 4035

LED driver

Drive 1W LEDs with the buck LED driver ILD 4035:

24V and 12V supply voltage version available –

350mA preset LED current –

Analog voltage and PWM pin for dimming –

Can be connectec to a string of 1W LEDs –

SP000858450 (24V version)

SP000858448 (12V version)

ILD 4120 24V board

ILD 4120

LED driver

Drive 3W LEDs with the buck LED driver ILD 4120:

24V and 12V supply voltage version available –

700mA preset LED current –

Analog voltage and PWM pin for dimming –

Can be connected to a string of 3W LEDs –

SP000858452 (24V version)

SP000858454 (12V version)

ILD 4001 board

ILD 4001

LED driver

Drive high power LEDs (1W, 3W, 3W+) with the buck LED

controller ILD 4001:

24V supply voltage –

Equipped with BSR 302N MOSFET for currents up to 3A –

Analog voltage and PWM pin for dimming –

Can be connected to a string of high power LEDs –

SP000889588

ILD 4180 demo board

ILD 4180

LED driver

Drive ultra-high power LEDs with the buck LED driver ILD 4180:

Up to 45V supply voltage –

LED current adjustable up to 1.8A –

Demo board can be operated in either constant current or –

constant output voltage mode

SP000848474

LED driver board with

ICL 8001G Control

ICL 8001G

Oine LED

driver IC

Demo board using single stage Quasi Resonant Flyback

Topology with ICL8001G primary side power control scheme for

phase cut dimming applications with high power factor- and

eciency- requirements.

EVAL-LED-ICL8001G-Bulb02

LED driver board with

CoolSET™

ICE 3B0365JG

Power control Ics

24V/350mA low-cost and highly ecient LED PSU for multiple

LEDs.

EVALACDC LED-ICE3B0365JG

HITFET™ protected

low-side power switch

BTS 3256D

Low-side switch

Protected low-side power switch (10mΩ at 25°C). This board

enables easy startup and connectivity for the new power

HITFET™ BTS 3256D. Enables easy read out of digital status via

LED, and easy slew rate change via variable resistor on board.

Demoboard BTS3256D

Lighting & LED Driver

Board Name Products Description Order No.

SPIDER (SPI Driver for

Enhanced Relay Control)

TLE 7231G

TLE 7233G

Multi-channel

switch

SPI Driver for Enhanced Relay Control (SPIDER). This board is

designed to interface with the universal body control module

system evaluation tool.

Demoboard TLE7231G/7233G

SPIDER (SPI Driver for

Enhanced Relay Control)

TLE 7234EM

TLE 7234SE

TLE 7237SL

Multi-channel

switch

The board is designed to interface with the universal body

control module system evaluation tool. The set contains

adapter boards for TLE 7234SE and TLE 7237SL.

Demoboard TLE7234/7237

SPIDER (SPI Driver for

Enhanced Relay Control)

TLE 7235EM

TLE 7235SE

TLE 7238SL

Multi-channel

switch

The board is designed to interface with the universal body

control module system evaluation tool. The set contains

adapter boards for TLE 7235SE and TLE 7238SL.

Demoboard TLE7235/7238

SPIDER (SPI Driver for

Enhanced Relay Control)

TLE 7236EM

TLE 7236SE

TLE 7239SL

Multi-channel

switch

The board is designed to interface with the universal body

control module system evaluation tool. The set contains

adapter boards for TLE 7236SE and TLE 7239SL.

Demoboard TLE7236/7239

SPIDER (SPI Driver for

Enhanced Relay Control)

TLE 7240SL

TLE 7243SL

TLE 7244SL

Multi-channel

switch

The board is designed to interface with the universal body

control module system evaluation tool. The set contains

adapter boards for TLE 7240SL, TLE 7243SL and TLE 7244SL.

Demoboard TLE724XSL

HIC-PROFET™

BTS 500x0-1EGA

High-side switch

For a quick start to lab evaluation, this demo board drives

loads such as heating, glow plugs or lamps in 12V DC

applications. It uses two devices from the BTS 500x0-1EGA

product family, which can be used in parallel and also to drive

two independent loads. The board can be used on a stand-

alone basis, but also in combi-nation with power easy kit for

quick start of software evaluation.

Demoboard BTS50050-1EGA

Demoboard BTS50060-1EGA

Demoboard BTS50070-1EGA

Demoboard BTS50080-1EGA

PROFET™+ demo board

BTS 5020-2EKA

BTS 5030-2EKA

BTS 5045-2EKA

BTS 5090-2EKA

BTS 5120-2EKA

BTS 5180-2EKA

High-side switch

This demo board is designed to handle all devices within

the PROFET™+ family. It provides the complete external

circuitry and testpins for a fully functional setup. Additional

functions like internal voltage generation for input pins and the

possibility to connect more than one demo board for a test set-

up are included. The demo board comes with a daughterboard

that holds the BTS 5020-2EKA which can be replaced by

daughterboards of other PROFET™+ devices .

Demoboard PROFET™+

SPOC I - power easy kit

BTS 5590G

BTS 5576G

BTS 5566G

Multi-channel

switch

This board is part of the SPOC (SPI power controller for

advanced light control) demo kit.

The demo kit consists of the power unit and the control unit

(XC2287 power easy kit - to be ordered separately).

Demoboard

BTS5590G

BTS5576G

BTS5566G

SPOC II - power easy kit

BTS 5662E

BTS 5672E

BTS 5682E

BTS 5672E

BTS 5662E

Multi-channel

switch

This board is part of the SPOC (SPI power controller for

advanced light control) demo kit.

The demo kit consists of the power unit and the control unit

(XC2287 power easy kit - to be ordered separately).

Demoboard

BTS5662E

BTS5672E

BTS5682E

BTS5672E

BTS5662E

Lighting & LED Driver

Board Name Products Description Order No.

SPOC FL - power easy kit

BTS 6480SF

BTS 6460SF

BTS 5480SF

BTS 5460SF

Multi-channel

switch

This board is part of the SPOC FL (SPI power controller for

advanced front light control) demo kit.

The demo kit consists of the power unit and the control unit

(XC2287 power easy kit - to be ordered separately).

Demoboard

BTS6480SF

BTS6460SF

BTS5480SF

BTS5460SF

TLD 5098EL

Application board

TLD 5098EL

DC/DC boost

controller

This small size DC/DC board is available in the following

topologies:

Boost to battery –

Boost to GND –

SEPIC –

and can drive LED loads up to 1.5A or higher.

Application Board TLD5098EL

TLD 5095EL demo board

TLD 5095EL

DC/DC boost

controller

This board is equipped with TLD 5095EL boost controller,

MOSFETs and LEDs or can be used via jumper-seeting with

external LED loads up to 1.5A or higher and up to 55V output

voltage.

Demoboard TLD5095EL

TLD 5098EL demo board

TLD 5098EL

DC/DC boost

controller

This board is equipped with TLD 5098EL boost controller,

MOSFETs and LEDs or can be used via jumper-seeting with

external LED loads up to 1.5A or higher and up to 60V output

voltage.

Demoboard TLD5098EL

TLD 5085 demo board

TLD 5085

DC/DC buck

converter

This board with the TLD 5085 buck converter is equipped with

LEDs or can be used via jumper-seeting with external LED loads

up to 1.8A.

Demoboard TLD5085

TLD 5085 Application

board with LED

TLD 5085

DC/DC buck

converter

This board with the TLD 5085 buck converter is equipped with

one LED or can be used with external LED loads up to 1.8A.

Application Board TLD5085

with LED

TLD 5085 Application

board with connector

TLD 5085

DC/DC buck

converter

This board with the TLD 5085 buck converter is equipped with

a connector to drive external LED loads up to 1.8A.

Application Board TLD5085

with Connector

Evaluation board

ICB 2FL01G

Smart ballast

controller

Demo board for ﬂuorescent lamp ballast with smart ballast

controller 2nd generation ICB 2FL01G for 1x54W T5 lamp.

EVAL board ICB2FL01G

Evaluation board

ICB 2FL02G

Smart ballast

controller

Demo board for dimmable ﬂuorescent lamp ballast with smart

ballast controller 2nd generation ICB 2FL02G for 1x26W TC-TEL

lamp.

EVAL board ICB2FL02G

Evaluation board

ICB 1FL02G

Smart ballast

controller

Demo board for ﬂuorescent lamp ballast with smart ballast

controller 1st generation ICB 1FL03G for 1x54W T5 lamp.

EVAL board ICB1FL02G

Evaluation board

ICB 2FL02G

Smart ballast

controller

Demo board for ﬂuorescent lamp ballast with smart ballast

controller 2nd generation ICB 2FL02G for 1x54W T5 lamp.

EVAL board ICB2FL02G

Evaluation board

ICB 1FL03G

Smart ballast

controller

Demo board for ﬂuorescent lamp ballast with smart ballast

controller 1st generation ICB 1FL03G for 1x54W T5 lamp.

EVAL board ICB1FL02G