1
All specifications are subject to change without notice. PB 3.3V REV2008_DEC22_01.6
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com
3.3V PECL Low Jitter XO
3.3V PECL Low Jitter XO
PB Series Crystal Clock Oscillator (XO)
7.0 x 5.0mm
PB
Product Features
38.88 to 162 MHz Frequency Range •
<1 ps RMS jitter with non-PLL design•
Designed for standard reflow & washing •
techniques
IBIS models available•
Pb-free & RoHS/Green compliant•
Product Description
The PB Series 3.3V crystal clock oscillator
achieves superb jitter and stability over a broad
range of operating conditions and frequencies.
The output clock signal, generated internally
with a non-PLL oscillator design, is compatible
with LVPECL logic levels. The device, available
on tape and reel, is contained in a 7.0 x
5.0mm surface-mount ceramic package.
Applications
The PB Series is ideal for high-speed
applications requiring low jitter, including:
1/10 Gigabit Ethernet•
2/4/10G FibreChannel•
Serial Attached SCSI (SAS)•
Server & Storage platforms•
SONET/SDH linecards•
Passive Optical Network (PON) devices•
HD Video Systems•
Package:
Pin Functions:
Pin Function
1 OE or NC
2 OE or NC
3Ground
4Q Output
5Q Output
6V
CC
Recommended Land Pattern:
7.0 x 5.0mm Ceramic SMD
Part Ordering Information:
PB XXX YYYY A: ProductFamily
B: XXX = FrequencyCode
C: YYYY = SpecificationCode
Following the above format, Saronix-eCera part numbers will be assigned upon
confirmation of exact customer requirements.
2
All specifications are subject to change without notice. PB 3.3V REV2008_DEC22_01.6
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com
3.3V PECL Low Jitter XO
3.3V PECL Low Jitter XO
PB Series Crystal Clock Oscillator (XO)
7.0 x 5.0mm
PB
Output Enable / Disable Function
Parameter Min. Typ. Max. Units Notes
Input Voltage (pin OE), Output Enable 0.7 V or open
Input Voltage (pin OE), Output Disable (low power standby) 0.3 V Outpus disabled to Hi-Z
Internal Pullup Resistance 50 kΩ
Output Disable Delay 200 ns
Output Enable Delay 10 ms
Electrical Performance
Parameter Min. Typ. Max. Units Notes
Output Frequency 38.88 162 MHz As specifi ed
Supply Voltage 2.97 3.30 3.63 V
Supply Current, enabled 55 88 mA
Supply Current, Disabled 0.03 mA
Frequency Stability ±20 to ±50 ppm See Note 1 below
Operating Temperature Range -20 +70 °C Commercial (standard)
-40 +85 Industrial (standard)
Output Logic 0, VOL VCC - 1.62 V
Output Logic 1, VOH VCC - 1.025 V
Output Load 50Ω connected connected to VCC - 2 V output requires termination
Duty Cycle 45 55 % measured 50% of waveform
Rise and Fall Time 500 850 ps measured 20/80% of waveform
Jitter, Phase 0.5 1 ps RMS (1-σ) 12kHz to 20MHz frequency band
Jitter, Total 25 ps pk–pk 100,000 random periods
Notes:
1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (5 year at 40°C average effective ambient temperature), shock and vibration.
2. For specifi cations othere than those listed, please contact sales.
Absolute Maximum Ratings
Parameter Min. Typ. Max. Units Notes
Storage Temperature -55 +125 °C
3
All specifications are subject to change without notice. PB 3.3V REV2008_DEC22_01.6
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com
3.3V PECL Low Jitter XO
3.3V PECL Low Jitter XO
PB Series Crystal Clock Oscillator (XO)
7.0 x 5.0mm
PB
Reliability Test Ratings
This product is rated to meet the following test conditions:
Type Parameter Test Condition
Mechanical Shock MIL-STD-883, Method 2002, Condition B
Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E)
Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D
Mechanical Gross leak MIL-STD-883, Method 1014, Condition C
Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10-8 atm cc/s)
Mechanical Solvent resistance MIL-STD-202, Method 215
Environmental Thermal shock MIL-STD-883, Method 1011, Condition A
Environmental Moisture resistance MIL-STD-883, Method 1004
Environmental Vibration MIL-STD-883, Method 2007, Condition A
Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max)
Test Circuit
Voltage Control Function
Output Enable/Disable Function
6 5 4
1 2 3
507 507
Test Point
(Termination
internal to scope)
+2.0V
-1.3V
Z = 507
0.1μF 0.01μF
0.1μF 0.01μF
Refl ow Soldering Profi le
Peak 260°C for 10 sec max
260
Temperature – °C
1 to 3°C/sec max
60 to 90 sec
Time
1 to 3°C/sec
217
4 to 6 minutes max
As per IPC/JEDEC J-STD-020C
4
All specifications are subject to change without notice. PB 3.3V REV2008_DEC22_01.6
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com
3.3V PECL Low Jitter XO
3.3V PECL Low Jitter XO
PB Series Crystal Clock Oscillator (XO)
7.0 x 5.0mm
PB
Output Waveform
