924-3/4"X36YD-BULK - 3M - Datasheet.Directory

Scotch®

ATG Tapes

924 • 926 • 928 • 969 • 976 • 987

Product Description Tape 924 0.05 mm thick adhesi v e transfer tape

Tape 926 0.13 mm thick high performance adhesi v e transfer tape

Tape 928 0.05 mm thick high-tack/lo w-tack double coated tape

Tape 969 0.13 mm thick high-tack adhesi v e transfer tape

Tape 976 0.05 mm thick high-tack adhesive transfer tape

Tape 987 0.04 mm thick adhesi v e transfer tape

Tapes are rev erse w ound on 1-inch diameter cores for use in Scotch ATG dispensers.

Technical Data April, 2011

Construction

Products Tape 924 Tape 926 Tape 928 Tape 969 Tape 976 Tape 987

Adhesive Type:*400 350 400/1000 300 300 400

Adhesive Carrier: None None Tissue None None None

Release Liner: Tan P aper Tan P aper White Paper Tan P aper Tan P aper Tan Paper

*DK *DK *PCK *DK *DK *DK

Approximate Thickness:

Release Liner 0.10 mm 0.10 mm 0.15 mm 0.13 mm 0.10 mm 0.09 mm

Tape Only 0.05 mm 0.13 mm 0.05 mm 0.13 mm 0.05 mm 0.04 mm

Tape Color: Clear Clear White Clear Clear Clear

*DK = densified kraft PCK = polycoated kraft

*Adhesive System 350 is a firm acrylic pressure-sensitive adhesive system. It features very high adhesion to a variety of surf aces, excellent

shear holding power, high temperature resistance and excellent UV resistance .

Adhesive System 400 is a medium-firm acrylic pressure-sensitive adhesive system. It features an excellent balance of good initial adhesion

(quick stick) and good shear holding power.

Adhesive System 400 is a medium-firm acrylic pressure sensitive adhesive system. If features high initial adhesion to a wide variety of

materials and good shear holding power.

Adhesive System 300 is a soft acrylic pressure-sensitive adhesive system. It f eatures very high initial adhesion and good shear holding power

to a wide variety of materials including most plastics.

Adhesive System 1000 is a low-tack, repositionable acrylic pressure-sensitive adhesive .

Scotch®ATG Ta pes

924 • 926 • 928 • 969 • 97 6 • 97 0 XL

A pplication Techniques • Bond strength is dependent upon the amount of adhesiv e-to-surf ace contact

de v eloped. Firm application pressure helps dev elop better adhesiv e contact and

improv e bond strength.

• To obtain optimum adhesion, the bonding surfaces must be clean, dry and well

unified. Typical surface cleaning solvents are isopropyl alcohol and w ater (rubbing

alcohol) or heptane. Note: Be sure to follo w the manuf acturer’s precautions and

directions for use when using solvents.

• Ideal tape application temperature range is 21°C to 38°C. Initial

tape application to surfaces at temperatures below 10°C is not recommended

because the adhesi v e becomes too firm to adhere readily. However, once properly

applied, lo w temperature holding is generally satisf actory.

Typical Physical

Properties and

Performance

Characteristics

Products

Tape

924

Tape

926

Tape

928

Tape

969

Tape

976

Tape

987

Adhesion to Steel:

(ASTM D3330) 3 N/100mm.

27 N/100 mm 163 N/100 mm low-tac k side 82 N/100 mm 66 N/100 mm 22 N/100 mm

high-tack side

13 N/100 mm

Relative High Temperature

Operating Ranges:

Long Term (days, weeks) 82°C 149°C 49°C 82°C 82°C 82°C

Short Term (minutes, hours) 121°C 232°C 82°C 121°C 121°C 121°C

Relative Solvent Resistance: Good Very Good Fair Medium Medium Good

U.V. Resistance: Excellent Good Good Not recommended Excellent

for direct exposure

to sunlight or other

sources of U.V. light.

Shelf Life of Tape in Roll Form: 24 months from date of manufacture when stored in original cartons at 21°C and 50% relative humidity.

Note: The f ollowing technical information and data should be considered representativ e

or typical only and should not be used for specification pur poses.

Available Sizes

A vailab le Lengths: 32.9 m 16.5 m 16.5 m 16.5 m 32.9 m 32.9 m

54.9 m 32.9 m 32.9 m 32.9 m 54.9 m 54.9 m

A vailab le Widths: 6.4mm, 12.7mm. 6.4mm, 12.7mm. 6.4mm, 12.7mm. 6.4mm, 12.7mm. 6.4mm, 12.7mm. 6.4mm, 12.7mm.

19mm, 50.8mm. 19mm, 50.8mm. 19mm, 50.8mm. 19mm.

Normal Slitting Tolerance: 0.8 mm

Core Size (ID) 25.4 mm 25.4 mm 25.4 mm 25.4 mm 25.4 mm 25.4 mm

• Tape 928 is a lo w-tack adhesive which allows remov al from many papers, foils, and

films without adhesiv e residue and will not cause delamination of most paper stocks. In

many cases, the tape can be reused numerous times.

• Tape 928 will not bleed into most paper stocks which helps minimize possible

discoloration or staining.

• Fle xible materials will adhere better to tape 928 than will rigid materials (e.g., paper vs.

cardboard). It may also be necessary to remov e curl from certain materials to av oid

having them pull away from the low-tack adhesiv e of tape 928 o ver a period of time.

• ATG tapes are a rev erse w ound version of standard 3M Adhesi ve Transfer

and Double Coated tapes for use in the Scotch®ATG hand-held dispensers.

Comparable 3M tapes are:

Scotch®ATG Ta pes

924 • 926 • 928 • 969 • 97 6 • 97 0 XL

ATG Tape Comparable 3M ATT/DC Tape

924 465(9665)

926 9485

928 9416

969 950

987 9498

976 927

General Inf ormation

A pplication Ideas •Tape 924

Tape 924 is ideal for bonding a wide variety

of similar and dissimilar materials such as

metals, glass, wood, papers, paints, and man y

plastics. Some application ideas include:

• Mounting promotional items, posters, etc.

• Core starting.

• Mounting picture frame mat boards and

dust cov ers.

•Tape 926

Tape 926 is ideal for applications requiring

high bond strength, high shear strength and

high temperature performance. Some

application ideas are:

• Nameplates on award plaques.

• Bonding foam insulation.

• Bonding folders and boxes that ha v e a

higher degree of memory.

Note: The user should carefully e valuate the product under actual use conditions to

determine whether it is fit for a particular purpose and suitable for the user’s

method of application.

•Tape 928

Many repositionable, reusable, or

reclosable uses such as:

• Reclosable bags or envelopes

• Core starting and end tabbing of

papers, foils, and films

• Novelty items

• Remov able stick ers and labels

• Point of purchase displays

• Book inserts

• Mounting promotional items

• Removable/changeable

advertisements

• Temporary hold for protective

packaging materials, such as

foam or cardboard, used during

shipment of manufactured goods

Engineered Adhesi v es Di vision

3M Center, Building 220-7E-01

St. Paul, MN 55144-1000 Printed in U.S .A.

Recycled Paper

40% pr e-consumer

10% post-consumer

Scotch®ATG Ta pes

924 • 926 • 928 • 969 • 97 6 • 97 0 XL

A pplication Ideas

(continued) •Tapes 969 and 976

Tapes 969 and 976 are ideal for

bonding materials with glossy

coatings where an aggressi ve

adhesi v e with high initial adhesion is

desired. Some application ideas are:

• Folders and boxes

• Attach f abric sw atches in sample

books

• Assemble point-of-purchase

displays

•Tape 987

This adhesi v e is ideal for adhesion to many

paper materials but also w orks well on

many surf aces. Some application ideas are:

• Pressure-sensitiv e edges for posters and

point of purchase sales advertising.

• Mounting photos pre-press, prior to color

scanning in lithography

• Mounting of novelty items, photographs,

note pads, etc.

MSDS: 3M has not prepared a MSDS for these products which are not subject to the MSDS requirements

of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R.

1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for

use, these products should not present a health and safety hazard. However, use or processing of the

products in a manner not in accordance with the directions for use may affect their performance and

present potential health and safety hazards.

TSCA: These products are defined as articles under the Toxic Substances Control Act and theref ore, are

exempt from inventory listing requirements.

Certification/

Recognition

To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550

or visit www.3M.com/bonding. Address correspondence to: 3M Engineered Adhesives Division, 3M

Center, Building 220-7E-01, St. Paul, MN 55144-1000. Our fax number is 651-733-9175. In Canada,

phone: 1-800-364-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00.

F or Additional

Information

3M MAKES NO WARRANTIES , EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is

responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s

method of application. Please remember that many factors can aff ect the use and performance of a 3M

product in a particular application. The materials to be bonded with the product, the surf ace prepar ation

of those materials, the product selected for use, the conditions in which the product is used, and the time

and environmental conditions in which the product is expected to perform are among the many factors

that can affect the use and performance of a 3M product. Given the variety of factors that can affect the

use and performance of a 3M product, some of which are uniquely within the user’s knowledge and

control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular

purpose and suitable for the user’s method of application.

Important Notice

If the 3M product is proved to be def ective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE TO

REFUND THE PURCHASE PRICE OF OR T O REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT.

3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or

consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence ,

warranty, or strict liability.

Limitation of Remedies

and Liability

This Engineered Adhesives Division product w as man ufactured under a 3M quality system registered to ISO 9002 standards .

ISO 9002