INDART, STXF-INDART/USB ST7FLIT0-IND/USB, ST7C334-INDART In-circuit debugging and in-circuit programming tool for ST7 Data brief Features In-circuit debugging features: - Source level and symbolic debugging - Unlimited instruction breakpoints - Execution control including instruction stepping - Advanced breakpoints on data, access type, access range, stack...(depending on model) - Watch variables, registers and peripherals In-circuit programming features: Blank check/erase/read/verify for Flash EEPROM memory and option bytes The inDART kit contains: Description inDART ICC interface board to connect the host PC to an evaluation or application board The inDART is a powerful, low-cost in-circuit debugging (ICD) and in-circuit programming (ICP) tool, developed for ST7 in partnership with Softec MicrosystemsTM. Evaluation board that includes an ST7 (except for the STXF-INDART) inDART edition of the STVD7 integrated development environment: The inDART takes advantage of the ST7 Visual Develop (STVD7) integrated development environment and ST7 in-circuit communication (ICC) capability to deliver ICD and ICP for a wide range of ST7 Flash microcontrollers. Hardware and software debugging features include real-time code execution, stepping and breakpoints. The inDART offers parallel or USB connection to the host PC, depending on the model, and 10-pin ICC connection for connecting to evaluation or application board. May 2011 Table 1. inDART order code Microcontroller STXF-INDART/USB All ST7 Flash MCUs ST7FLIT0-IND/USB ST7FLITE0x see www.smh-tech.com ST7FLITE2x see www.smh-tech.com ST72F264 see www.smh-tech.com ST72F521 see www.smh-tech.com ST72C104 ST72C215 ST72C216 ST72C254 ST7C334-INDART ST72C124 ST72C314 ST72C334 see www.smh-tech.com ST7FLITE0x see www.smh-tech.com ST72F26x Doc ID 11211 Rev 3 For further information contact your local STMicroelectronics sales office. Device summary 1/3 www.st.com 3 Ordering information INDART, STXF-INDART/USB, ST7FLIT0-IND/USB, ST7C334-INDART Ordering information InDART starter kits can be ordered from Softec MicrosystemsTM or from your nearest ST distributor or sales office. Use the following table to determine which inDART MCU is best adapted to your requirements. Table 2. InDART details Microcontroller Order code Advanced Real time breakpoints Evaluation board (MCU) Host PC connection All ST7 Flash MCUs STXF-INDART/USB Yes(1) Yes(2) ST7FLITE0x ST7FLIT0-IND/USB Yes(1) Yes(2) Yes (ST7FLite09 - DIP16) USB (1) Yes (ST7FLite29 - DIP16) USB Yes (ST7F2649 - SDIP32) USB USB ST7FLITE2x see www.smh-tech.com Yes Yes(2) ST72F264 see www.smh-tech.com Yes(1) Yes(2) ST72F521 see www.smh-tech.com (1) Yes(2) ST72C104 ST72C215 ST72C216 ST72C254 see www.smh-tech.com Yes Yes (ST7C254 - SDIP32) Parallel ST72C124 ST72C314 ST72C334 ST7C334-INDART Yes Yes (ST7C334 - DIP56) Parallel ST7FLITE0x see www.smh-tech.com Yes Yes (ST7FLite09 - DIP16) Parallel ST72F26x see www.smh-tech.com Yes Yes (ST7F264 - SDIP32) Parallel Yes Yes (ST7F521 - TQFP64)(3) USB 1. Advanced breakpoints only for MCUs with on-chip debug module 2. Real time, with breakpoint limitation for MCUs without on chip debug modules 3. This evaluation board also supports ST72F32x For more information and documentation, please refer to the Softec MicrosystemsTM web site or the STMicroelectronics microcontroller support site on www.st.com. Revision history Table 3. Document revision history Date Revision 01-Feb-2005 1 Initial release. 30-Mar-2009 2 Modified references to inDart-ST7 to inDART, in line with product family name. 30-May-2011 3 Modified Table 1: Device summary and Table 2: InDART details. Added INDART to root part number list. 2/3 Changes Doc ID 11211 Rev 3 INDART, STXF-INDART/USB, ST7FLIT0-IND/USB, ST7C334-INDART Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 11211 Rev 3 3/3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: ST7F521-IND/USB ST7FLIT0-IND/USB ST72C254G1B6 ST72C254G2B6 ST7F264-IND/USB ST7FLIT2-IND/USB ST7C254-INDART ST72C254G1M6 ST72C104G1M6/TR ST72C254G2M3 ST7FLITE0-INDART