Technical Data Sheet Opto Interrupter ITR9702-F Features Fast response time High analytic Cut-off visible wavelength p=940nm High sensitivity Pb free This product itself will remain within RoHS compliant version Descriptions The ITR9702-F consist of an infrared emitting diode and an NPN silicon phototransistor, encased side-by-side on converging optical axis in a black thermoplastic housing, The phototransistor receives radiation from the IR LED only .This is the normal situation. But when an object is in between , phototransistor could not receives the radiation. For additional component information , please refer to IR928-6C-F and PT928-6C-F Applications Mouse Copier Switch Scanner Floppy disk driver Non-contact Switching For Direct Board Device Selection Guide Device No. Chip Material LENS COLOR IR928-6C-F GaAlAs Water clear PT928-6C-F Silicon Water clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 7 Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng ITR9702-F Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions 0.2mm 3.Lead spacing is measured where the lead emerge from the package 4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation . Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent 6.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 7 Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng ITR9702-F Absolute Maximum Ratings (Ta=25) Parameter Power Dissipation at(or below) 25Free Air Temperature Input Output Symbol Ratings Unit Pd 75 mW Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current (*1) Pulse width 100s, Duty cycle=1% IFP 1 A Collector Power Dissipation PC 75 mW Collector Current IC 20 mA Collector-Emitter Voltage B VCEO 30 V Emitter-Collector Voltage B VECO Topr 5 V -25~+85 Tstg -40~+100 Tsol 260 Operating Temperature Storage Temperature Lead Soldering Temperature (*2) (1/16 inch form body for 5 seconds) (*1) tw=100 sec. , T=10 msec. (*2) t=5 Sec Electro-Optical Characteristics (Ta=25) Parameter Input Forward Voltage Reverse Current Min. Typ. Max. Unit Conditions VF IR P ----- 1.2 --- 1.5 10 V A IF=20mA --- 940 --- nm IF=20mA 21/2 --- 40 --- Deg IF=20mA Dark C urrent ICEO --- --- 100 nA VCE=20V,Ee=0mW/cm2 C-E Saturation Voltage VCE(sat) --- 0.15 0.4 V IC=2mA ,Ee=1mW/cm2 IC(ON) 0.5 --- --- mA VCE=5V Ic(OFF) --- --- 20 A IF=20mA tr --- 15 --- sec tf --- 15 --- sec VCE=5V IC=1mA RL=1K Peak Wavelength View Angle Output Symbol Collect Current Transfer Characteristics Rise time Fall time VR=5V Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 7 Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng ITR9702-F Typical Electrical/Optical/Characteristics Curves for IR Fig.1 Forward Current vs. Ambient Temperature Fig.2 Spectral Distribution 70 100 60 IF=20mA Ta=25C 80 50 60 40 30 40 20 20 10 0 0 -40 -20 0 Fig.3 20 40 60 80 100 Peak Emission Wavelength vs. Ambient Temperature Fig.4 Forward Current vs. Forward Voltage 4 10 980 960 10 3 940 10 2 920 900 -25 1 10 0 50 25 75 0 100 Fig.5 Forward Voltage vs Ambient Temperature(C) 1 2 3 4 Fig.6 Relative Radiant Intensity vs. Angular Displacement -20 1.3 0 -10 10 20 30 1.2 IF=20mA 1.1 1.0 40 0.9 50 0.8 0.7 60 70 80 1 25 50 75 100 120 0.6 0.4 0.2 0 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 7 Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng ITR9702-F Typical Electrical/Optical/Characteristics Curves for PT Fig.1Collector Power Dissipation vs. Ambient Temperature Fig.2 Spectral Sensitivity 100 1.0 80 0.8 60 0.6 40 0.4 20 0.2 Ta=25 C 0 0 -25 25 0 50 75 85 100 Fig.3 Relative Collector Current vs. Ambient Temperature 160 100 300 500 700 900 1100 1300 Fig.4 Collector Current vs. Irradiance 100 2 140 C 120 10 100 80 1 60 40 0.1 20 0 0 10 20 30 40 50 60 70 0.01 0.5 3 1.5 1 2 Fig.5 Collector Dark Current vs. Ambient Temperature Fig.6 Collector Current vs. Collector-Emitter Voltage 14 10 12 10 10 8 10 6 4 10 2 10 0 25 50 75 0 0 100 1 2 3 4 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 7 Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng ITR9702-F Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% NO. Item 1 Solder Heat Test Condition TEMP : 260 5 H : +100 2 3 Sample Size 10 sec 22 PCs 15 min 5 min Temperature Cycle L : -40 15 min H : +100 5 min 10 sec Thermal Shock Test Hours/ Cycle L : -10 300 cycle 300 cycle Failure Judgement Criteria Ac/Re 0/1 (IR)Attenuation of Power brightness or 22 PCs Electrical value>20% 0/1 (PT) Attenuation of Light Current 22 PCs >20% 0/1 5 min 4 High Temperature Storage TEMP. : +100 1000 hrs 22 PCs 0/1 5 Low Temperature Storage TEMP. : -40 1000 hrs 22 PCs 0/1 1000 hrs 22 PCs 0/1 1000 hrs 22 PCs 0/1 6 7 DC Operating Life VCE=5V IF=20mA High Temperature / 85 / 85% R.H. High Humidity Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 7 Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng ITR9702-F Packing Quantity Specification 1. 80PCS/1Plate,5Plates/1Boxe, 10Boxes/1Carton Label Form Specification Pb EVERLIGHT X RoHS P/N : Production Number CPN: Customer's Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number X: Month Reference: Identify Label Number ITR9702-F Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 7 Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng