Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 7
Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng
Technical Data Sheet
Opto Interrupter
ITR9702-F
Features
Fast response time
High analytic
Cut-off visible wavelength λp=940nm
High sensitivity
Pb free
This product itself will remain within RoHS compliant version
Descriptions
The ITR9702-F consist of an infrared emitting diode and an NPN silicon phototransistor,
encased side-by-side on converging optical axis in a black thermoplastic housing,
The phototransistor receives radiation from the IR LED only .This is the normal situation.
But when an object is in between , phototransistor could not receives the radiation.
For additional component information , please refer to IR928-6C-F and PT928-6C-F
Applications
Mouse Copier
Switch Scanner
Floppy disk driver
Non-contact Switching
For Direct Board
Device Selection Guide
Device No. Chip Material LENS COLOR
IR928-6C-F GaAlAs Water clear
PT928-6C-F Silicon Water clear
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 7
Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng
ITR9702-F
Package Dimensions
Notes:
1.All dimensions are in millimeters
2.Tolerances unless dimensions ±0.2mm
3.Lead spacing is measured where the lead emerge from the package
4.Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification
5.These specification sheets include materials protected under copyright of EVERLIGHT
corporation . Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent
6.When using this product , please observe the absolute maximum ratings and the
instructions for use outlined in these specification sheets. EVERIGHT assumes no
responsibility for any damage resulting from use of the product which does not comply
with the absolute maximum ratings and the instructions included in these specification
sheets.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 7
Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng
ITR9702-F
Absolute Maximum Ratings (Ta=25)
Parameter Symbol Ratings Unit
Power Dissipation at(or below) 25Free
Air Temperature Pd 75 mW
Reverse Voltage VR 5 V
Forward Current IF 50 mA
Input
Peak Forward Current (*1) Pulse width
100μs, Duty cycle=1% IFP 1 A
Collector Power Dissipation PC 75 mW
Collector Current IC 20 mA
Collector-Emitter Voltage B VCEO 30 V
Output
Emitter-Collector Voltage B VECO 5 V
Operating Temperature Topr -25~+85
Storage Temperature Tstg -40~+100
Lead Soldering Temperature (*2) (1/16 inch form
body for 5 seconds) Tsol 260
(*1) tw=100 μsec. , T=10 msec. (*2) t=5 Sec
Electro-Optical Characteristics (Ta=25)
Parameter Symbol Min. Typ. Max. Unit Conditions
Forward Voltage VF --- 1.2 1.5 V IF=20mA
Reverse Current IR --- --- 10 μAVR=5V
Peak Wavelength λP --- 940 --- nm IF=20mA
Input
View Angle 2θ1/2 --- 40 --- Deg IF=20mA
Dark C urrent ICEO --- --- 100 nA VCE=20V,Ee=0mW/cm2
Output C-E Saturation
Voltage VCE(sat) --- 0.15 0.4 V IC=2mA
,Ee=1mW/cm2
IC(ON) 0.5 --- --- mA
Collect Current
Ic(OFF) --- --- 20
μA
VCE=5V
IF=20mA
Rise time tr --- 15 ---
μsec
Transfer
Characteristics
Fall time tf --- 15 --- μsec
VCE=5V
IC=1mA
RL=1K
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 7
Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng
0
-40 -20 402006010080
10
20
30
40
50
60
70
-20
0.6
0.9
0.7
0.8
1.0
0.20.4 0 0.2 0.4 0.6
50
70
80
60
40
30
-10 02010
0
20
40
60
80
100 IF=20mA
Ta=25°C
25
1
1.1
1.2
1.3
50 75 100 120
IF=20mA
75
-25 025 50 100
900
920
940
960
980
0
10
101
102
3
10 4
1234
ITR9702-F
Typical Electrical/Optical/Characteristics Curves for IR
Fig.1 Forward Current vs. Fig.2 Spectral Distribution
Ambient Temperature
Fig.3 Peak Emission Wavelength vs. Fig.4 Forward Current vs.
Ambient Temperature Forward Voltage
Fig.5 Forward Voltage vs Fig.6 Relative Radiant Intensity vs.
Ambient Temperature(°C) Angular Displacement
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 7
Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng
0
-25
20
40
50
025 8575 100
60
80
100
20
0
0
40
10 20 30 6050 70
100
60
40
80
140
120
160
2
0.01
0.5 1 1.5
2
3
0.1
1
10
100
C
100
0
0.2
0.4
500300 700
Ta=25
1.0
0.6
0.8
C
1100900 130
0
10
10
0
10
10
10
25 50 75 100
10
4
0
0
2
1
6
8
23
14
12
4
ITR9702-F
Typical Electrical/Optical/Characteristics Curves for PT
Fig.1Collector Power Dissipation vs. Fig.2 Spectral Sensitivity
Ambient Temperature
Fig.3 Relative Collector Current vs. Fig.4 Collector Current vs.
Ambient Temperature Irradiance
Fig.5 Collector Dark Current vs. Fig.6 Collector Current vs.
Ambient Temperature Collector-Emitter Voltage
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 7
Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng
ITR9702-F
Reliability Test Item And Condition
The reliability of products shall be satisfied with items listed below.
Confidence level90%
LTPD10%
NO. Item Test Condition
Test
Hours/
Cycle
Sample
Size Failure
Judgement
Criteria Ac/Re
1 Solder Heat
TEMP : 260 ± 5 10 sec 22 PCs 0/1
2 Temperature Cycle
H : +100 15 min
5 min
L : -40 15 min
300
cycle 22 PCs
(IR)Attenuation
of Power
brightness or
Electrical
value>20%
0/1
3 Thermal Shock
H : +100 5 min
10 sec
L : -10 5 min
300
cycle 22 PCs
(PT) Attenuation
of Light Current
>20% 0/1
4 High Temperature
Storage TEMP. : +100 1000 hrs 22 PCs 0/1
5 Low Temperature
Storage TEMP. : -40 1000 hrs 22 PCs 0/1
6 DC Operating Life VCE=5V
IF=20mA 1000 hrs 22 PCs 0/1
7 High Temperature /
High Humidity
85 / 85% R.H. 1000 hrs 22 PCs
0/1
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 7
Device NoDRX-0000010 Prepared date2007/6/4 Prepared bywangyinsheng
ITR9702-F
Packing Quantity Specification
1. 80PCS/1Plate,5Plates/1Boxe, 10Boxes/1Carton
Label Form Specification
P/N : Production Number
CPN: Customer’s Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Peak Wavelength
REF: Reference
LOT No: Lot Number
X: Month
Reference: Identify Label Number
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
These specification sheets include materials protected under copyright of EVERLIGHT corporation.
Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
Pb
RoHS
EVERLIGHT X
ITR9702-F