SPECIFICATION CONTROL DRAWING
CHEMINAX Date:
Revision:
THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200.
CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS
DIMENSIONS ARE NOMINAL VALUES IN INCHES, UNLESS OTHERWISE
DESIGNATED.
ADDITIONAL REQUIREMENTS
COMPONENT WIRE PRIOR TO CABLING
(Test procedures per SAE AS22759)
FINISHED CABLE
(Test procedures per NEMA WC 27500, unless otherwise specified)
The conductor AWG size and outer jacket color will be appended to
the part number. Unless otherwise specified, outer jacket color will
be white designated by a "-9" in accordance with MIL-STD-681,
(e.g. 10614-24-9).
Other codes and suffixes may be added to the part number, as
necessary, to capture any additional requirements imposed by the
purchase order.
ENGINEERING REFERENCE
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the
right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
Page 1 of 1 Cheminax, Raychem, TE Connectivity, and TE connectivity (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, California 94063-3800
Phone: 1-800-522-6752 Fax: 1-650-361-6297
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2009-2018 TE Connectivity Ltd. family of companies. All Rights Reserved.
10614
77 OHM, AWG 24, 19 STRANDS OF AWG 36, EMP HARDENED,
DATA BUS CABLE, MIL-STD-1553
2-13-18
K
CHARACTERISTIC IMPEDANCE 77 ± 5 ohms, Method C at 1 MHz
MUTUAL CAPACITANCE 30.0 pF/ft. (98.4 pF/m) (maximum)
ATTENUATION 1.4 dB/100 ft. (4.59 dB/100 m) (maximum)
at 1 MHz
SURFACE TRANSFER IMPEDANCE 0.2 milliohms/meter (maximum)
(Per SAE AS85485) at 30 MHz
CONDUCTOR RESISTANCE 26.5 ohms/1000 ft. (86.9 ohms/km) (nominal)
CROSSLINKING PROOF TEST 300 ± 3°C for 1 hour,
.500 inch (12.7 mm) mandrel,
.375 lb (170 g), 2.5 kV dielectric test
INSULATION (DIELECTRIC)
ELONGATION 50% (minimum)
TENSILE STRENGTH 5000 lbf/in2 (34.5 N/mm2) (minimum)
INSULATION FLAWS
SPARK TEST 3.0 kV (rms)
IMPULSE TEST 8.0 kV (peak)
INSULATION RESISTANCE 5000 megohms for 1000 ft.
(1524 megohms-km) (minimum)
LOW TEMPERATURE-COLD BEND -65 ± 3°C for 4 hours,
.750 inch (19.1 mm) mandrel,
1.00 lb (454 g), 2.5 kV dielectric test
SHRINKAGE 200 ± 3°C for 1 hour,
.125 inch (3.18 mm) (maximum)
in 12 inches (305 mm)
BLOCKING 200°C for 6 hours
CABLE LAY LENGTH .75 inch (19.1 mm) (minimum),
1.25 inches (31.8 mm) (maximum)
CROSSLINKED VERIFICATION 300 ± 5°C for 6 hours,
6.00 inch (152 mm) mandrel
FLAMMABILITY 3 seconds (maximum);
(Method B of Spec 1200) 3 inches (76.2 mm) (maximum);
no flaming of facial tissue
JACKET
ELONGATION 50% (minimum)
TENSILE STRENGTH 5000 lbf/in2 (34.5 N/mm2) (minimum)
JACKET FLAWS
SPARK TEST 1.0 kV (rms)
IMPULSE TEST 6.0 kV (peak)
JACKET THICKNESS .008 inch (.203 mm) (nominal)
LOW TEMPERATURE-COLD BEND -55 ± 5°C for 4 hours,
6.00 inch (152 mm) mandrel
VOLTAGE WITHSTAND 1000 volts (rms) (minimum)
(DIELECTRIC)
WRAP .002 inch (.051 mm) thick (nominal),
25% overlap (minimum)
WEIGHT 29.1 lbs/1000 ft. (43.3 kg/km) (maximum)
CABLE IDENTIFICATION: Outer jacket shall be marked in contrasting color at 12
inch (305 mm) (nominal) intervals between marks as follows: "10614 RAYCHEM"
TEMPERATURE RATING 150°C (maximum)
.0250
(.635 mm)
.113
(2.87 mm)
.048 ± .002
(1.22 ± .05 mm)
.158
(4.01 mm)
CONDUCTORS
AWG 24,
19 Strands of AWG 36,
Silver-Coated High-
Strength Copper Alloy
DIELECTRICS
Radiation-Crosslinked,
Modified ETFE
Colors - Light Blue/White
FILLERS
Radiation-Crosslinked,
Modified ETFE
1st SHIELD
AWG 38,
Tin-Coated Copper,
Optimized
JACKET
Radiation-Crosslinked,
Modified ETFE
.125
(3.18 mm)
.142
(3.61 mm)
2nd SHIELD
AWG 38,
Tin-Coated Copper,
Optimized
WRAP
Mu-Metal
.032
(.813 mm)
