TFPTL Vishay Radial Leaded PTC - Nickel Thin Film Linear Thermistors FEATURES Nickel thin film PTC element High stability over the entire temperature range cUL recognized component: File E148885 Epoxy coated UL 94 V-0 approved Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS Temperature measurement, sensing, compensation and control in industrial and consumer applications. For on-board or remote sensing. DESCRIPTION These thermistors are based on a Nickel thin film resistor technology as thermal sensitive material. The device consists of a thin film ceramic chip with two tinned copper clad steel wire leads. MARKING The thermistors are laser marked with value and tolerance reference on an epoxy based coating. (Example: 102F = 10 x 102 = 1000 1 %) MOUNTING By soldering or welding in any position. QUICK REFERENCE DATA PARAMETER DESCRIPTION Resistance value at 25 C (2) Tolerance on R25-value (2) TCR at 25 C Tolerance on TCR at 25 C (1) Operating temperature range: at rated power at zero dissipation Response time (in oil) Dissipation factor (for information only) Maximum rated power at 70 C (P70) Maximum working voltage RCWV (3) Climatic category (LCT/UCT/days) Weight VALUE TFPTL10 100 to 1K UNIT TFPTL15 100 to 5K % ppm/K ppm/K 1; 5 4110 400 - 55 to + 70 - 55 to + 150 C 1.1 2.9 75 30 1.6 3.4 100 40 s mW/K mW V g 55/150/56 0.12 0.14 STANDARD RESISTANCE VALUES at 25 C in (2) 100 120 150 180 220 270 330 390 470 560 680 820 Notes (1) Contact Vishay if closer TCR lot tolerance is desired (2) Other R -values and tolerances are available upon request 25 (3) Rated continuous working voltage is maximum working voltage or 1K 1.2K 1.5K 1.8K 2.2K 2.7K 3.3K 3.9K 4.7K 5.0K P 70 x R , whichever is less GLOBAL PART NUMBER INFORMATION Global Part Numbering: TFPTL10L1001FL2B T F P T L PRODUCT TYPE SIZE CHARACTERISTIC TFPT Leaded 10 15 L = Linear www.vishay.com 1 1 0 RESISTANCE VALUE 1000 = 100R 1001 = 1K 5001 = 5K L 1 0 0 1 F TOLERANCE LEAD CONFIGURATION F=1% J=5% L2 H5 For technical questions, contact: nlr@vishay.com L 2 B PACKAGING B = Bulk (500 pieces) U = Ammopack (2500 pieces) T = T/R (4000 pieces) Document Number: 33027 Revision: 25-Oct-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TFPTL Radial Leaded PTC - Nickel Thin Film Linear Thermistors Vishay DIMENSIONS Wb SH T Wb 471J H 102F H SH L L d F F L2 H5 Component outline for lead spacing 2.5 mm 0.8 mm (straight leads) Component outline for lead spacing 5.0 mm 0.8 mm (flat bent leads) TFPTL DIMENSIONS in millimeters SIZE L10 SIZE L15 L2 H5 Wbmax. 3.6 Hmax. 3.5 SHmax.(seating height) L2 H5 4.0 3.8 5.0 6.2 5.2 d 6.5 0.5 10 % L 25 min. F 2.5 0.8 5.0 0.8 Tmax. 2.5 0.8 2.2 5.0 0.8 2.4 Notes * Bulk packed types have a standard lead length L = 25 mm minimum * Thickness is defined as "T" Power in % of P70 Power Derating 110 100 90 80 70 60 50 40 30 20 10 0 - 75 - 50 - 25 0 25 50 75 100 125 150 175 Temperature in C Note * Zero power is considered as measuring power max. 1 % of rated power P70 Document Number: 33027 Revision: 25-Oct-11 For technical questions, contact: nlr@vishay.com www.vishay.com 2 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TFPTL Radial Leaded PTC - Nickel Thin Film Linear Thermistors Vishay PERFORMANCE MAXIMUM R25/R25 (1) 0.25 % 0.3 % 0.2 % 0.2 % 0.2 % 0.2 % 0.2 % 0.25 % TEST Storage dry heat (5000 h at 125 C) High temperature exposure (1000 h at 150 C) Damp heat steady state, unloaded (1344 h at 40 C/95 % RH) Thermal cycling (15 min at - 55 C, 15 min at 150 C, 100 cycles) Thermal cycling (15 min at - 55 C, 15 min at 125 C, 1000 cycles) Short time overload (2.5 x P70 for 60s at 70 C) Long term dissipation (1000 h rated power at 70 C) Resistance to soldering heat (10 s at 260 C) Note (1) TFPTs are ESD sensitive AVERAGE RATIO R/R25 TFPTL ALL SIZES AND VALUES TEMP. R/R25 - 55 - 54 - 53 - 52 - 51 - 50 - 49 - 48 - 47 - 46 - 45 - 44 - 43 - 42 - 41 - 40 - 39 - 38 - 37 - 36 - 35 - 34 - 33 - 32 - 31 - 30 - 29 - 28 - 27 - 26 - 25 - 24 - 23 - 22 - 21 0.702 0.705 0.708 0.712 0.715 0.719 0.722 0.725 0.729 0.732 0.736 0.739 0.743 0.746 0.749 0.753 0.756 0.760 0.763 0.767 0.771 0.774 0.778 0.781 0.785 0.788 0.792 0.796 0.799 0.803 0.806 0.810 0.814 0.817 0.821 www.vishay.com 3 TEMP. - 20 - 19 - 18 - 17 - 16 - 15 - 14 - 13 - 12 - 11 - 10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 R/R25 0.825 0.828 0.832 0.836 0.839 0.843 0.847 0.851 0.854 0.858 0.862 0.866 0.869 0.873 0.877 0.881 0.885 0.889 0.892 0.896 0.900 0.904 0.908 0.912 0.916 0.920 0.924 0.927 0.931 0.935 0.939 0.943 0.947 0.951 0.955 0.959 0.963 0.967 0.971 0.975 TEMP. 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 R/R25 0.980 0.984 0.988 0.992 0.996 1.000 1.004 1.008 1.012 1.017 1.021 1.025 1.029 1.033 1.037 1.042 1.046 1.050 1.054 1.059 1.063 1.067 1.071 1.076 1.080 1.084 1.089 1.093 1.097 1.102 1.106 1.110 1.115 1.119 1.124 1.128 1.133 1.137 1.141 1.146 TEMP. 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 R/R25 1.150 1.155 1.159 1.164 1.168 1.173 1.177 1.182 1.186 1.191 1.196 1.200 1.205 1.209 1.214 1.219 1.223 1.228 1.232 1.237 1.242 1.246 1.251 1.256 1.261 1.265 1.270 1.275 1.280 1.284 1.289 1.294 1.299 1.303 1.308 1.313 1.318 1.323 1.328 1.333 For technical questions, contact: nlr@vishay.com TEMP. 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 R/R25 1.337 1.342 1.347 1.352 1.357 1.362 1.367 1.372 1.377 1.382 1.387 1.392 1.397 1.402 1.407 1.412 1.417 1.422 1.427 1.432 1.437 1.442 1.448 1.453 1.458 1.463 1.468 1.473 1.478 1.484 1.489 1.494 1.499 1.505 1.510 1.515 1.520 1.526 1.531 1.536 TEMP. 140 141 142 143 144 145 146 147 148 149 150 R/R25 1.541 1.547 1.552 1.557 1.563 1.568 1.574 1.579 1.584 1.590 1.595 Document Number: 33027 Revision: 25-Oct-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TFPTL Radial Leaded PTC - Nickel Thin Film Linear Thermistors Vishay RATIO FORMULA RT = R25 x (9.0014 x 10-1 + 3.87235 x 10-3 (C)-1 x T + 4.86825 x 10-6 (C)-2 x T2 + 1.37559 x 10-9 (C)-3 x T3) T(C) = 28.54 x (RT/R25)3 - 158.5 x (RT/R25)2 + 474.8 x (RT/R25) - 319.85) Ratio Tolerance Examples: RATIO TOLERANCES LOW TEMP. HIGH TEMP. TOL. - 55 C + 150 C 4% - 40 C + 125 C 3% - 20 C + 85 C 2% 0 C + 55 C 1% + 12 C + 40 C 0.5 % At 40 C, ratio = 1.063 0.5 % (0.005) so, ratio = 1.058 to 1.068 At 125 C, ratio = 1.460 3 % (0.044) so, ratio = 1.416 to 1.504 Ratio RT/R25 1.7 1.6 1.5 Max. 1.4 1.3 Min. Ratio 1.2 1.1 1.0 Min. 0.9 Max. 0.8 0.7 0.6 - 75 - 50 - 25 0 25 50 75 100 125 150 75 100 125 150 Temperature in C TCR Typical Value 4800 4700 4600 TCR in ppm/K 4500 4400 4300 4200 4100 4000 3900 3800 3700 3600 - 75 - 50 - 25 0 25 50 Temperature in C Document Number: 33027 Revision: 25-Oct-11 For technical questions, contact: nlr@vishay.com www.vishay.com 4 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000