Silicon Bridge Rectifier Features: * * * * * * Rating to 1,000V PRV Surge Overload Rating to 200A Peak Ideal for Printed Circuit Board Reliable Low Cost Construction Utilizing Moulded Plastic Technique Results in Inexpensive Product Lead Solderable per MIL-STD-202 Method 208 Glass Passivated Junctions Maximum Ratings and Electrical Characteristics: Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate by 20%. Characteristics Symbol GBU810 Units Maximum recurrent peak reverse voltage VRRM 1,000 V Maximum RMS voltage VRMS 700 V Maximum DC blocking voltage VDC 1,000 V Maximum average forward output current at TC=100C IF(AV) 8 A Peak forward surge current 8.3ms single half-sine-wave Super imposed on rated load IFSM 200 A VF 1 V IR 10 1 A mA TJ, TSTG -50 to +150 C Maximum instantaneous forward voltage at 4A Maximum reverse current at TA = 25C At rated DC blocking voltage at TA = 100C Storage and Operating junction temperature range www.element14.com www.farnell.com www.newark.com Page <1> 28/02/13 V1.0 Silicon Bridge Rectifier www.element14.com www.farnell.com www.newark.com Page <2> 28/02/13 V1.0 Silicon Bridge Rectifier Package Outline Dimensions: Package Information Part Number Table Device Package Shipping GBU810 GBU 500 Units/Box Description Part Number Silicon Bridge Rectifier GBU810 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 28/02/13 V1.0