ACDC-100 TRMS - Amprobe - Datasheet.Directory

www.Amprobe.com

Amprobe® Test Tools

Data Sheet

No hassle

warranty

No waiting.

No shipping

charges.

Our commitment to

high-quality products

and customer service

is demonstrated by

our industry exclusive

“No Hassle” warranty.

In the unlikely event

that an Amprobe Test

Tool requires warranty

service, any of our

local dealers are

authorized to replace

it, on the spot.

(note: $500 MSLP limit)

ACDC-100 TRMS

1000A AC/DC Clamp-On Multimeter

Where accuracy, quality, and the newest technology meet. The ACDC-

100 offers superior AC/DC measurement capabilities, highest product

quality and enhanced ergonomics design. The TRMS version addresses

needs of professionals who rely on performance and reliability.

True RMS

■

Backlight ■

Capacitance test ■

AC/DC voltage to 600V ■

Resistance ■

Continuuity Beeper ■

Relative zero mode ■

Auto power off ■

Data hold ■

MAX capture function for in ■

rush current measurements

(30 mS response)

Large, easy to read ■

digital display

Diode Test ■

Audible continuity ■

Accommodates conductors up to ■

50mm (2.00”) in diameter

“Third hand” - test probe holder ■

Rubber over-molded case with ■

built-in probes storage

Carrying case, test leads, batteries ■

(installed) and user manual included

600V

Amprobe® Test Tools www.Amprobe.com

Data Sheet

1000A ACDC-100 TRMS AC/DC Clamp-On Multimeter

DC Voltage

400.0 mV 0.3% + 3d

4.000V, 40.00V, 400.0V 0.5% + 3d

600V 1.0% + 4d

NMRR : >50dB @ 50/60Hz

CMRR : >120dB @ DC, 50/60Hz, Rs=1kΩ

Input Impedance : 10MΩ, 30pF nominal (1000MΩ for 400.0mV range)

AC Voltage

50Hz ~ 500Hz 400.0mV 1) 4.0% + 4d

50Hz ~ 60Hz 4.000V, 40.00V, 400.0V 1.0% + 4d

60Hz ~ 500Hz 4.000V, 40.00V, 400.0V 1.5% + 4d

50Hz ~ 500Hz 600V 2.0% + 4d

CMRR : >60dB @ DC to 60Hz, Rs=1kΩ

Input Impedance: 10MΩ, 30pF nominal

ACDC-100 TRMS Crest Factor: < 1.6 : 1 at full scale & < 3.2 : 1 at half scale

1) Selection by RANGE button manually, and is speciﬁed AC 60mV and up

Resistance

400.0Ω 0.8% + 6d

4.000kΩ, 40.00kΩ, 400.0kΩ 0.6% + 4d

4.000MΩ 1.0% + 4d

40.00MΩ 2.0% + 4d

Open Circuit Voltage : 0.4VDC typical

Audible Continuity Tester

Open Circuit Voltage: 0.4VDC typical

Range: 400.0Ω; Accuracy: 1.5% + 6d

Audible threshold: between 10Ω and 120Ω.

Diode Tester

Open Circuit Voltage Test Current (Typical)

< 1.6 VDC 0.4mA

Capacitance

500.0nF, 5.000μF, 50.00μF,

500.0μF, 3000μF 1) 3.5% + 6d2) 3)

1) Additional 50.00nF range accuracy is not speciﬁed

2) Accuracies with ﬁlm capacitor or better

3) Speciﬁed with battery voltage above 2.8V (approximately half full battery). Accuracy decreases gradually to 12% at low battery

warning voltage of approximately 2.4V

DC Current (Clamp-on)

400.0A 0.0A ~ 400.0A 1.5% + 4d 1) 2)

1000A 400A ~ 800A 1.5% + 4d 1) 2)

800A ~ 900A 2.0% + 4d 1) 2)

900A ~ 1000A 5.0% + 30d 1) 2)

1) Induced error from adjacent current-carrying conductor: < 0.01A/A

2) ∆ Zero mode must be applied to zero the unit before measurement to ensure accuracy. This is particularly important below 20A.

Electrical Specifications Accuracy is ±(% reading digits + number of digits) or otherwise specified, at 23℃ ± 5℃ & less than 75% R.H.

Function Range Accuracy

www.Amprobe.com

Data Sheet

1000A ACDC-100 TRMS AC/DC Clamp-On Multimeter

General Specifications

Display: 3-3/4 digits 4000 counts LCD display

Update Rate: 3 per second nominal

Polarity: Automatic

Low Battery: Below approx. 2.4V

Operating Temperature: 0℃ to 40℃

Relative Humidity: Maximum relative humidity 80% for temperature up to 31℃ decreasing linearly to 50% relative

humidity at 40℃

Altitude: Operating below 2000m

Storage Temperature: -20℃ to 60℃, < 80% R.H. (with battery removed)

Temperature Coefﬁcient: nominal 0.15 x (speciﬁed accuracy)/ ℃ @(0℃ -18℃ or 28℃ -40℃), or otherwise speciﬁed

Sensing: True RMS

Safety: Meets EN61010-1:2001; IEC61010-2-032(2002), EN61010-2-032(2002), UL61010B-2-032(2003)

Category III 600 Volts AC & DC.

Transient protection: 6.5kV (1.2/50μs surge) for all models

Pollution degree: 2

E.M.C.: Meets EN61326-1

In an RF ﬁeld of 3V/m:

Capacitance function is not speciﬁed Other function ranges: Total Accuracy = Speciﬁed Accuracy + 45 digits

Performance above 3V/m is not speciﬁed

Overload Protections:

Clamp-on jaws: DC 1000A or AC 800A rms continuous + & COM terminals (all functions) : 600VDC/VAC rms

Power Supply: standard 1.5V AAA Size (NEDA 24G or IEC R03) battery X 2; or 1.5V

AAA Size (NEDA 24A or IEC LR03) alkaline battery X 2

Power Consumption: typical 11mA for ACA/DCA and 2.9mA for other functions

APO Timing: Idle for 30 minutes

APO Consumption: typical 190μA

Dimension: L227mm X W78mm X H40mm

Weight: 290 gm approx

Jaw opening & Conductor diameter: 50mm max

AC Current (Clamp-on)

400.0A

15Hz ~ 40Hz 2.0% + 5d 1) 2) 3)

40Hz ~ 200Hz 1.5% + 5d 1) 2)

200Hz ~ 400Hz @ <50A 4) 1.5% + 5d 1) 2)

400Hz ~ 1kHz @ <50A 4) 2.0% + 5d 1) 2)

800A

15Hz ~ 40Hz @ 400A ~ 600A 2.0% + 5d 1) 2) 3)

40Hz ~ 100Hz @ 400A ~ 600A 1.5% + 4d 1) 2)

15Hz ~ 60Hz @ 600A ~ 800A 5.0% + 30d 1) 2)

1) Induced error from adjacent current-carrying conductor: < 0.01A/A

2) ACDC-100 TRMS crest Factor: < 1.6 : 1 at full scale & < 3.2 : 1 at half scale

3) 4.0% + 5d for ACDC-100 TRMS

4) Accuracy is speciﬁed at <50A in this frequency bandwidth due to limited calibrator output capability for testing

Function Range Accuracy

www.Amprobe.comwww.Amprobe.com

Amprobe® Test Tools

Data Sheet

Amprobe® Test Tools

website: www.Amprobe.com

email: info@amprobe.com

Everett, WA 98203

Tel: 877-AMPROBE

Amprobe® Test Tools Europe

In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

Available with TRMS and Display Backlight

The ACDC-100 TRMS version addresses the needs of professionals who rely on performance and

reliability. A large LCD for easy viewing.

Simpliﬁed Interface

These full function clamp-ons have simpliﬁed interfaces to help your customers get their work done

quickly. Easy-to-read oversize display screens feature the large digits. Each meter offers auto and manual

ranging along relative zero mode functions.

Included Accessories

Test leads; carrying case SV-U; users manual

Optional Accessories

ELS2A Line splitter (Energizer)

ACF-3000 AK 3000A AC Flexible Clamp-on Attachment

TMA-K Single Input Thermocouple Temperature Attachment

MTL-500 Test Lead Kit

Test Lead Kit

Replacement Accessories

MTL-90B Test Leads w/Alligator Clips

9/2007 3128767 Rev A

1000A ACDC-100 TRMS AC/DC Clamp-On Multimeter