USS810 USB 2.0 Full-Speed/Low-Speed Transceiver Product Brief Features Complies with Universal Serial Bus Specification Rev. 2.0. Can be used as a USB device transceiver or a USB host transceiver. Supports full-speed (12 Mbits/s) and low-speed (1.5 Mbits/s) serial data rates. Includes two single-ended receivers with hysteresis. Low-power operation helps maximize battery life of portable electronic devices. Available in a small MLCC16 package measuring 3 mm x 3 mm. (A lead-free package is also available. See Ordering Information on page 2.) Supports a digital I/O voltage range from 1.75 V to 3.3 V. Supports the full industrial operating temperature range, -40 C to +85 C. Applications Portable electronic devices, such as the following: Mobile phone Digital still camera Personal digital assistant (PDA) Information appliances Description Agere's USS810 is a Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev. 2.0. The USS810 can transmit and receive serial data at full-speed (12 Mbits/s) and lowspeed (1.5 Mbits/s) data rates and, therefore, can be used as either a USB device transceiver or a USB host transceiver. Since the USS810 operates at digital I/O voltages between 1.75 V to 3.3 V, it is particularly suitable for portable electronic devices such as mobile phones, digital still cameras, personal digital assistants (PDAs), and a variety of information appliances. This transceiver provides an ideal interface to the physical layer of the universal serial bus for application-specific ICs (ASICs) and programmable logic devices (PLDs) with power supply voltages in the above range. The USB transceiver is currently available in an MLCC16 package that supports single-ended input data interface. Product Brief www.agere.com June 2006 USS810 USB 2.0 Full-Speed/Low-Speed Transceiver Product Brief June 2006 Functional Diagram VDD(I/O) VDD SOFCON OE SPEED FSE0 VO VPU(3.3) D+ D- 24 W (1%) 1.5 kW1 24 W (1%) L E SUSPND RCV + - VP VM GND 1. Connect pull-up to D- for low-speed operation. Ordering Information Device Code USS810M-D USS810M-DT L-USS810M-D* L-USS810M-D* Description USS810 in dry-packed tube USS810 in dry-packed tape and reel Lead-free USS810 in dry-packed tube Lead-free USS810 in dry-packed tape and reel Package Comcode MLCC16 MLCC16 MLCC16 MLCC16 700057479 700058082 700067200 700067201 * Lead-free: No intentional addition of lead, and less than 1000 ppm. Agere Systems lead-free devices are fully compliant with the Restriction of Hazardous Substances (RoHS) directive that restricts the content of six hazardous substances in electronic equipment in the European Union. Beginning July 1, 2006, electronic equipment sold in the European Union must be manufactured in accordance with the standards set by the RoHS directive. For additional information, contact your Agere Systems Account Manager, sales at www.agere.com/sales, or email us at docmaster@agere.com. Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. Agere, Agere Systems, and the Agere logo are registered trademarks of Agere Systems Inc. The USB-IF logo is a trademark of the Universal Serial Bus Implementers Forum, Inc. Copyright (c) 2006 Agere Systems Inc. All Rights Reserved. June 2006 PB06-049CMPR