3.2x1.6mm SMD CHIP LED LAMP Part Number: APTD3216PBC/A Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z3.2mmX1.6mm SMT LED, 1.8mm thickness. The Blue source color devices are made with InGaN zLow power consumption. on SiC Light Emitting Diode. zIdeal for backlight and indicator. Static electricity and surge damage the LEDS. zVarious colors and lens types available. It is recommended to use a wrist band or anti-electrostatic zPackage: 2000pcs / reel . glove when handling the LEDs. zMoisture sensitivity level : level 3. All devices, equipment and machinery must be electrically zRoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE9926 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/25/2009 DRAWN: X.J.Guo PAGE: 1 OF 5 ERP: 1203004171 Selection Guide Part No. Dice APTD3216PBC/A Lens Type Blue (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 110 400 50 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Blue D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE9926 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/25/2009 DRAWN: X.J.Guo PAGE: 2 OF 5 ERP: 1203004171 Blue APTD3216PBC/A SPEC NO: DSAE9926 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/25/2009 DRAWN: X.J.Guo PAGE: 3 OF 5 ERP: 1203004171 APTD3216PBC/A Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAE9926 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/25/2009 DRAWN: X.J.Guo PAGE: 4 OF 5 ERP: 1203004171 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAE9926 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu APTD3216PBC/A DATE: MAR/25/2009 DRAWN: X.J.Guo PAGE: 5 OF 5 ERP: 1203004171